Bonjour, super la fibre Info, heureusement que vous êtes là
De mon coté j'ai un problème, j'ai suivi la procédure indiqué dans le fil (82), mais je suis confronté a un truc que je n'arrive pas a résoudre.
Je suis sous linux, mon SFP MA5671A, apres avoir passé le scripts python qui marche bien, je passe ensuite a l'autre étape pour booter sur le SFP , je passe la commande "screen /dev/ttyUSB0 115200", mon sfp démarre, arrive un moment, il affiche root@sfp et redémarre sans cesse !! je sais pas si quelque'un a eu ce pb et peux me donner une piste ou m'aider ?
LC(tm) ON GPIO Driver, (C) 2012 [ 0.104000] Switching to cloc
[ 0.124000] TCP bind hash Hash tables configured (establie entries: 256 (order: 0, 4096 bytes)
[ 0.152000] NET: Regiort module.
[ 0.172000] RPC: Registered tcp NFSv4.1 backcha180000] EASY98000 LED driver, Version 1.0.1 (c) Copyright 2013, 4.0 (2009/01/31) Phillip Lougher
[ 0.216000] jffs2: versio
[ 0.232000] io scheduler noound w25q128, expected s25fl129p0ions on "sflash":
[ 0.284000- watchdog -
[ 15.312000] pps_core: LinuxPP5.3.6 - Copyright 2005-2007 Rodort registered
] to enter failsafe mode
Press hit [enter] to select the debug
jffs2 is ready
jffs2 is ready
[ 19.108000] jffs2: notice: (274) jffs2_build_xattr_subsystem: complete building xattr subsyst6.6 (c) Copyright 2009, Lantiq Deutschland GmbH
[ 21.372000] NET: Registered protocol family 10
[ 21.392000] GPON SFP I2C Slave Driver, Version 2.2.1 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
[ 21.412000] [sfp_i2c] vpe code <sfp_i2c_vpe.bin> with size <4188 bytes> loaded!
[ 21.416000] VPE loader: VPE1 running successfully
yright 2015, Lantiq Beteiligungs-GmbH & Co. KG
p (err 0)
[ 22.036000] mod_f24s: Unknown symbol skb_complete_tx_timestamp (err 0)
MIPS: set unaligned_action to 'S[ 29.196000] i2c /dev entries driver
[ 29.212000] Custom GPIO-based I2C driver version 0.1.1
[ 29.224000] i2c-gpio i2c-gpio[ 34.240000] [onu] password: 9mware loaded v9.90.6.1
Start status monitoring for I2C EEPROM[0]@0x50 EEPROM[1]@0x51
slope 0.921100, offset 2.191600IO: probed
ROM: V1.1.4
ROM: CFG 0x00000006
ROM: SFLASH-4
U-Boot 2011.12-lantiq-gpon-1.2.24 (Nov 03 2014 - 22:46:28), 64 MiB
Now running in RAM - U-Boot at: 83fc8000
SF: Detected W25Q128 with page size 4 KiB, total 16 MiChip: FALCON-S (A22)
Bootmode:et
CPU Clock: 400 MHz
Net: SGMII, SERDES [PRIME]
gpio: pin SPACE to delay and Ctrl-C to abort autoboot in 3 seconds
SF: Detected W25Q128 with page s## Booting kernel from Legacy Im 2017-05-20 1:01:32 UTC
ISize: 1207793 Bytes = 1.2 MiB
Load Address: 80002000
Entry Point: 80002000
Verife ... inux read_c0_wired() = 0
[ 000] NET: Registered protocol family 17
[ 0.360000] 8021q: 802.1Q VLAN Support v1.8
Merci pour votres aides
Max