En cours d'ecriture
Voici les commandes que j'utilise sur l'ERL qui peuvent etre utile avec en exemple la configuration Bouygues FTTH , n'hesitez pas a enrichir dans les commentaires, en ecrivant je me rends bien compte que cela depend des configurations de chacun mais je pense que ca peut etre utilse malgre tout comme exemple
# Creer un enregistrement statique dans le serveur DHCP
set service dhcp-server shared-network-name lan subnet 192.168.1.0/24 static-mapping "nom-du-PC" ip-address 192.168.1.2
set service dhcp-server shared-network-name lan subnet 192.168.1.0/24 static-mapping "nom-du-PC" mac-address 00:2B:34:37:80:36
# Ajouter un enregistrement dans le serveur DNS
set system static-host-mapping host-name nom-du-PC.domain.local inet 192.168.1.2
# Rendre accessible un serveur RDP sur un port non standard (4791 au lieu de 3389)
# Etape 1 : L'ouverture du firewall d'abord sur le vrai port utilise (3389)
set firewall name WAN_IN rule 40 description "RDP nom-du-PC"
set firewall name WAN_IN rule 40 action accept
set firewall name WAN_IN rule 40 protocol tcp
set firewall name WAN_IN rule 40 destination port 3389
set firewall name WAN_IN rule 40 destination address 192.168.1.2
# Etape 2 : Les regles NAT
set service nat rule 1 type destination
set service nat rule 1 description "RDP nom-du-PC"
set service nat rule 1 destination port 4791
set service nat rule 1 inbound-interface eth1
set service nat rule 1 inside-address address 192.168.1.2
set service nat rule 1 inside-address port 3389
set service nat rule 1 log disable
set service nat rule 1 protocol tcp
#Configurer le VPN L2TP : IP Publique : 80.80.80.80 , IP ERL : 192.168.1.1 , Interface WAN : eth1.200
set vpn ipsec ipsec-interfaces interface eth1.200
set vpn ipsec nat-networks allowed-network 0.0.0.0/0
set vpn ipsec nat-traversal enable
set vpn l2tp remote-access authentication mode local
set vpn l2tp remote-access authentication local-users username toto password Unmotdepassedur
set vpn l2tp remote-access client-ip-pool start 192.168.99.6
set vpn l2tp remote-access client-ip-pool stop 192.168.99.8
set vpn l2tp remote-access ipsec-settings authentication mode pre-shared-secret
set vpn l2tp remote-access ipsec-settings authentication pre-shared-secret Unsecretdur
set vpn l2tp remote-access ipsec-settings ike-lifetime 3600
set vpn l2tp remote-access outside-address 80.80.80.80
set vpn l2tp remote-access outside-nexthop 192.168.1.1
set vpn l2tp remote-access dns-servers server-1 192.168.1.1
set vpn l2tp remote-access dns-servers server-2 8.8.8.8
# Configurer le bootPXE
set service dhcp-server shared-network-name bootpxe subnet 192.168.100.0/24 bootfile-name pxelinux.0
set service dhcp-server shared-network-name bootpxe subnet 192.168.100.0/24 bootfile-server 192.168.100.254
# Configurer le hairpin (NAT qui fonctionne depuis l'interieur, pratique pour tester ses serveurs web ou redirection NAT)
set port-forward hairpin-nat enable
set port-forward wan-interface eth1
set port-forward lan-interface eth0
# Activer l'offload
set system offload ipv4 vlan enable
# add a certificate to the erl
set system static-host-mapping host-name erl.domain.com inet 192.168.1.1
Create the cert files from startssl.com
Decrypt the cert : Toolbox / Decrypt private key
Create the .pem file : in a text file just copy/paste the decrypted private key + the certificate
Copy the file on /etc/lighttpd/server.pem
Troubleshooting (starting the web manually to check errors) : /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf
# Static arp for wake on wan , X.X.X.X : Ip en dehors du réseau par exemple 192.168.X.254
set protocols static arp X.X.X.X hwaddr ff:ff:ff:ff:ff:ff
Ubiquiti