Auteur Sujet: Remplacer ONT SFR (Lu 95332 fois)

Asclèpios · « **Réponse #480 le:** 09 août 2023 à 17:41:25 »

Hello, pourras-tu faire une capture d’écran sur l’ONU commandes suivantes :

gtop c - a
gtop c - y

Quel firmware utilises-tu ?
Tu pourras m’envoyer un fw_printenv de ton ONU si tu le souhaites afin de vérifier que tu es les bonne info et qu’il n’y ai pas de coquilles…

Citation de: maxdata01 le 09 août 2023 à 14:29:25

Bonjour, J'ai moi aussi des PB pour connecter ma fibre sur mon SFP, je sais pas pourquoi alors que tout semble OK !
J'ai une question sur l'ip red sfr, je suis en 79.8X.XX.XX, c'est pas du CGGNAT ça ?

merci pour vos réponses

Max

Asclèpios · « **Réponse #481 le:** 09 août 2023 à 17:45:11 »

Hello, pourras-tu faire une capture d’écran sur l’ONU commandes suivantes :

gtop c - a
gtop c - y

Quel firmware utilises-tu ?

Par ailleurs il faudrait que d’autres nous indique si il ont une ip en 10.X.Y et si c’est KO ou OK pour permettre peut-être d’établir une corrélation.

Citation de: X le 08 août 2023 à 19:23:14

Hello,

En effet, option 60 envoyé par mon client DHCP. Actuellement, j'utilise un ER-X prêté par un ami.
Code: [Sélectionner]
send vendor-class-identifier "neufbox_NB6VAC-bypassed";
Je suis bien en 10.X.X.X sur ma box.

Je confirme les dires de @rooot, la requête DHCP est en timeout, testé en direct avec un client DHCP, en request et discover.

Merci @G8U5 pour le lien, j'ai bien tout check je suis ISO niveau configuration avec le bon VLAN de provisionné !
J'ai également tenté le mac spoofing à différent emplacement source, sans succès.

Je vais tenter la requête DHCP depuis le Leox directement si je peux y uploader les binaires.

Il semblerait qu'il faille absolument capturer les packets DHCP de la box pour comprendre ce qui se passe.
Mais tant que les credentials en UART n'ont pas été trouvé ça me semble compliqué.

G8U5 · « **Réponse #482 le:** 09 août 2023 à 18:15:01 »

@rooot, Ca fonctionne chez moi avec la version omcc à 0xA0 ...
Si non, je n'ai pas la commande IP LINK sur le FS.com.

rooot · « **Réponse #483 le:** 09 août 2023 à 18:41:58 »

Citation de: Asclèpios le 09 août 2023 à 17:38:01

Hello, pourras-tu faire une capture d’écran sur l’ONU commandes suivantes :

gtop c - a
gtop c - y

Quel firmware utilises-tu ?

cette commande n'existe pas sur le LEOX.

maxdata01 · « **Réponse #484 le:** 11 août 2023 à 23:11:03 »

Citation de: Asclèpios le 09 août 2023 à 17:41:25

Hello, pourras-tu faire une capture d’écran sur l’ONU commandes suivantes :

gtop c - a
gtop c - y

Quel firmware utilises-tu ?
Tu pourras m’envoyer un fw_printenv de ton ONU si tu le souhaites afin de vérifier que tu es les bonne info et qu’il n’y ai pas de coquilles…

Merci pour l'aide Asclèpios

pour répondre, je suis sur un SFP Huawei et un ERX-4, le firmware est le Modded 5.1 sur image 0.

gtop c - a

Code: [Sélectionner]

GPE status
Name:        ONU_GPE_STATUS_TABLE
ID:          77

Table:       13
 Type:       ARRAY (0)
 Size:       25
 Entry size: 32
 Base:       0x0000

Packet Engine #0:
[0000]: 00 00 00 00
[0001]: 00 00 00 00
[0002]: 00 19 00 00
[0003]: 00 00 00 00
[0004]: 00 19 00 00
[0005]: 00 00 00 00
[0006]: 00 19 00 00
[0007]: 00 00 00 00
[0008]: 00 19 00 00
[0009]: 00 00 00 00
[0010]: b0 80 00 00
[0011]: 00 00 00 00
[0012]: 00 19 00 00
[0013]: 00 00 00 00
[0014]: 00 00 00 00
[0015]: 00 00 00 00
[0016]: 87 80 00 00
[0017]: 00 00 00 00
[0018]: 87 80 00 00
[0019]: 00 00 00 00
[0020]: 87 80 00 00
[0021]: 00 00 00 00
[0022]: 00 00 00 00
[0023]: 00 00 00 00
[0024]: 00 00 00 00

Packet Engine #1:
[0000]: 00 00 00 00
[0001]: 00 00 00 00
[0002]: 00 00 00 00
[0003]: 00 00 00 00
[0004]: 87 80 00 00
[0005]: 00 00 00 00
[0006]: 00 00 00 00
[0007]: 00 00 00 00
[0008]: 00 00 00 00
[0009]: 00 00 00 00
[0010]: 00 00 00 00
[0011]: 00 00 00 00
[0012]: 00 00 00 00
[0013]: 00 00 00 00
[0014]: 00 00 00 00
[0015]: 00 00 00 00

gtop c - y

Code: [Sélectionner]

GPE status
Name:        ONU_GPE_STATUS_TABLE
ID:          77
GPE VLAN treatment

Name:        ONU_GPE_VLAN_TREATMENT_TABLE
ID:          43
;;;;tagb;tagb;tagb;taga;taga;taga
no;inner not generate;outer not generate;discard enable;tpid;vid;treatment;tpid;vid;treatment
0;1;1;1; ;    ;15; ;    ;15
1;1;1; ;2; 101; 9; ;    ;15
2;1;1; ;2; 101; 9; ;    ;15
3; ; ;1; ;    ;15; ;    ;15
4;1;1; ;6; 101;10;4;    ;15
5;1;1; ;6; 101;  ;4;    ;15
6;1; ; ; ;    ;15; ;    ;15
7; ; ; ; ;    ;15; ;    ;15
64;1;1; ;6;    ; 9; ;    ;15
65;1;1; ;6; 101; 9; ;    ;15
66;1;1; ; ;    ;15; ;    ;15
67;1;1; ; ;    ;15; ;    ;15
68;1;1; ; ;    ;15; ;    ;15
69;1; ; ; ;    ;15; ;    ;15
70; ; ; ; ;    ;15; ;    ;15
128;1;1; ; ;    ;15; ;    ;15
129;1;1; ; ;    ;15; ;    ;15
130; ;1; ; ;    ;15; ;    ;15

Le fw print (j'ai mis des X un peux partout)

Code: [Sélectionner]

root@SFP:/# fw_printenv
act_img_addr=0xBF20003C
addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off
addmisc=setenv bootargs ${bootargs} ethaddr=${ethaddr} machtype=${machtype} ignore_loglevel vpe1_load_addr=0x83f00000 vpe1_mem=1M mem=63M ${mtdparts}
addmtdparts0=setenv mtdparts mtdparts=sflash:256k(uboot)ro,512k(uboot_env),7424k(linux),8192k(image1)
addmtdparts1=setenv mtdparts mtdparts=sflash:256k(uboot)ro,512k(uboot_env),7424k(image0),8192k(linux)
baudrate=115200
bertEnable=0
boot_image=run boot_image${c_img};
boot_image0=run kernel0_from_sf flashargs addip addmtdparts0 addmisc && bootm ${ram_addr}
boot_image1=run kernel1_from_sf flashargs addip addmtdparts1 addmisc && bootm ${ram_addr}
boot_image_err=setenv kernel_offs ${kernel0_offs};httpd && setenv image0_is_valid 1
bootcmd=run flash_flash
commit=1
committed_image=0
env_offs=0x40000
env_offs_redund=0x80000
ethact=SERDES
ethaddr=00:06:91:XX:XX:XX
ethprime=SERDES
fileaddr=80F00000
filesize=345000
flash_flash=run select_image boot_image
flashargs=setenv bootargs rootfstype=squashfs,jffs2
gDtiaGentEnable=false
gSerial=PTIN9147XXXX
goi_calibrated=1
goi_config=begin-base64 644 goi_config@H4sIAIah1VgCA+2YS2/bOBCAfV3/Ci568KkKhXJLFXrI1mkRNEWD2HAPQSHI@Em0La5mGpLTdf79DK45lW2mLdtfXQ3Ow6XlwhpQ+chJTJX2XWXJ2dxmURVP@lyZaxqUposLMoimOvKT80PsuoSiS8803yuE3BUV74FMpfEYFZz1UAIMeob0T@yF1ZxQUhvcLa6nN+X7L/pPKEDC1Z2Yoki3g1N6RaGDL+Z21IlppVlc0yU/wZ@hmHf6Z5fnY8ubqKbi5dO84SMTb4mt6/fh+SyWpDbu3McjS5w8O4sd+MY57st@3/d9YKH0VKBC4NzjSoW03+vkhxDzOf6/H/1v5F8CUx3/Pxn/ecf/r8H/h3id@RtP0P6L/K/inDf6FRP7xk3X8n4b/dI9/x/k97ZPz62H013BLekgmeCWQ24kD@moe+9gCg4/iX4h9P7P8hh2NcCfEo/3gCbPjnQimJY4q3vxQd/6cQ2iHw2/Of@2NUsm28OgHp4Wv6Z6/kf7n+FfQL40u/4P4n06ydO8OGTwXxpp/Fy0P/D3Qh2@RV7Ey2xaxG48znKDO4UN/4BRCJ5S8RTomMIzkCEpkyJbV2SiPOnxkLx9cX7l@fggPQvLyXT30B/29XIVrN8oDZYV9hsGEd4Wpe9FyV8ymHSmTeLn5z9TSfiQD@6uF79ZjHIpsvHlz2sqRJmkTY4x4mx5LKPKsqUzxiidb2ozNuE17TiJIBKN1Q@gVP5gsuDOXK7yirbCB5n8as4W0XXV26Onf4NLqKx8bXdb4uDPf1xHNpZWxz7@QhzbixvihuJ+0roQFgA9ssHWpmVrHBYC+Na0xm1sLXPSuhCMa8/nbKCDhm1X@pBb76vv6NFV7y/5U1XrqKakYD4JABIrvXC5zm7o3qV6c7/kAMqCMc/84q1uG@8o/TOr2ElrzO4Ak875TSQUB1W9rN3nhYFCjGdHOWYWOHfHqcFvUa+HFW1HMv@kCCYAoa527Kij/TwWQotgVN9CG5u4hL5zM2qaqBHX0dj9+cBFiwauz/e4uh2@mSs86QNQiulGaTej0WUEPKBpXPy9dcVrgWuNa2aixbM5Kfh+oLTSnIugxXUd@F/HULrNk68+o8rXmAmhweC7Y/O5AM7VlvJv0ytr1G5uaDR57frOkzHZ+ryYj@zPRphhca+nU9RieddPJjyr9EYZGwABwAAA==@====@
gphy0_phyaddr=0
gphy1_phyaddr=1
image0_addr=0xB00C0000
image0_is_valid=1
image1_addr=0xB0800000
image_name=openwrt-lantiq-falcon-SFP
kernel0_from_sf=sf probe 0;sf read ${ram_addr} ${kernel0_offs} ${max_kernel_size}
kernel0_offs=0xC0000
kernel1_from_sf=sf probe 0;sf read ${ram_addr} ${kernel1_offs} ${max_kernel_size}
kernel1_offs=0x800000
load_kernel=tftp ${ram_addr} ${tftppath}${image_name}-uImage
load_uboot=tftp ${ram_addr} ${tftppath}u-boot.img
machtype=SFP
magic_addr=0xBF200038
magic_val=0xDEADBEEF
max_kernel_size=180000
nDyingGaspEnable=0
nSerial=PTIN9147XXXX
net_nfs=run load_kernel nfsargs addip addmtdparts0 addmisc;bootm ${ram_addr}
netmask=255.255.255.0
next_active=1
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath},${nfsoptions}
nfsoptions=rsize=1024,wsize=1024
olt_type=2
omci_vendor_pro=0
ont_serial=PTIN9147XXXX
ram_addr=80F00000
reset_uboot_env=sf probe 0;sf erase 40000 80000
save_uboot=sf probe 0;sf erase 0 40000;sf write ${ram_addr} 0 ${filesize}
select_image=setenv activate_image -1;if itest *${magic_addr} == ${magic_val} ; then if itest *${act_img_addr} == 0 ; then setenv activate_image 0;fi;if itest *${act_img_addr} == 1 ; then setenv activate_image 1;fi;mw ${magic_addr} 0x0;mw ${act_img_addr} 0x0;fi;if test $activate_image = -1 ; then setenv c_img $committed_image;else setenv c_img $activate_image;setenv activate_image -1;fi;if test $c_img = 0 && test $image0_is_valid = 0 ; then setenv c_img 1;fi;if test $c_img = 1 && test $image1_is_valid = 0 ; then setenv c_img 0;fi;if test $image0_is_valid = 0 && test $image1_is_valid = 0 ; then setenv c_img _err;fi;exit 0
serverip=192.168.1.100
stderr=serial
stdin=serial
stdout=serial
tx_fault_pin=2
update_image0=tftp ${ram_addr} ${tftppath}${image_name}-squashfs.image;sf probe 0;sf erase ${kernel0_offs} +${filesize};sf write ${ram_addr} ${kernel0_offs} ${filesize}
update_image1=tftp ${ram_addr} ${tftppath}${image_name}-squashfs.image;sf probe 0;sf erase ${kernel1_offs} +${filesize};sf write ${ram_addr} ${kernel1_offs} ${filesize}
update_openwrt=run update_image0 && setenv committed_image 0 && setenv image0_is_valid 1 && saveenv
update_uboot=run load_uboot && run save_uboot
ver=U-Boot 2011.12-lantiq-gpon-1.2.24 (Nov 03 2014 - 22:46:28)
ipaddr=192.168.1.10
gatewayip=192.168.2.1
bootdelay=5
asc0=0
preboot=gpio set 3;gpio input 2;gpio input 105;gpio input 106;gpio input 107;gpio input 108
target=oem-generic
image0_version=3FE7SWS4040018
image1_version=3FE7SW04030009
onu_serial=PTIN9147XXXX
onu_ploam=8V72ZIXX
omci_vendor_id=PTIN
omci_equip_id=GS0100GH
nPassword=0x38 0x56 0x37 0xXX 0xXX 0x49 0x55 0x50 0x00 0x00
mib_file_custom=/root/custom.ini
omci_hw_ver=3NT7SFU1389B25
omci_omcc_ver=134
omci_loid=user
omci_lpwd=password
sfp_a0_low_128=begin-base64 644 sfp_a0_low_128 @AwQBAAAAAgAAAAADDAAUyAAAAABMYW50aXEgICAgICAgICAgAAAAAEZhbGNv@biBTRlAgICAgICAwICAgBR4AbQAaAAAwMzJWUkoxMEs2MDAxNDI5MTkwNTA4@ICBo4AN1SjY5MjAwNDU5NSAgICAgICAgICAgICAgICAgICAgICAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAA==@====@
sfp_a2_info=begin-base64 644 sfp_a2_info @XwDOAFoA0wCMoHUwiLh5GK/IAACIuAAAm4Ii0HuGK9QJzwAXB8sAEAAAAAAA@AAAAAAAAAAAXAAAAAAAAAAAAAAAAAA/gAAAAAAAAAEAAAABAAAAAQAAAAEA@AAAAAABMK4CAhg/SNPEAQf////8AAAAA//8AAAAAcAEAAAAAAAD/////////@////////////MDMwMzJWUkoAAAAAAAD+Ff//////////////////////////@//////////8AAhQ4VjcyWklVUAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAJQVElOkUfZT////////////////////wAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAhCZ8gf96GAC5yQsrBGl/Z3HVGI84ZuqxREvF@GAdBaDtoOs/GhhCHqadMmHOf2ivmj2x02zuMxqZ2e3n4uaBjehZOAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAaRRPAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAABHUzAxMDBHSAAAAAAAAAAAAAAAAFBUSU4AAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAA==@====@
image1_is_valid=0
root@SFP:/#

Logs

Code: [Sélectionner]

[omcid] 19:58:11 MSG   PRN: OMCI #257 RX:
 48 10 48 0a 00 ab 01 01 04 00 f8 00 00 00 f0 32
 d0 00 00 2f 00 00 00 00 03 2a 00 00 00 00 00 00
 00 00 00 00 00 00 00 00
[omcid] 19:58:11 CORE  PRN: 171@257 set RX frame VLAN table       = f8 00 00 00 f0 32 d0 00 00 2f 00 00 00 00 03 2a
[omcid] 19:58:11 ME    PRN: 171@257 Override entry (old) filter_outer_prio=15,filter_outer_vid=4096,filter_outer_tpid_de=0,word1_padding=0 filter_inner_prio=15,filter_inner_vid=101,filter_inner_tpid_de=5,word2_padding=0,filter_ether_type=0 treatment_tags_remove=3,word3_padding=0,treatment_outer_prio=15,treatment_outer_vid=0,treatment_outer_tpid_de=0 word4_padding=0,treatment_inner_prio=15,treatment_inner_vid=101,treatment_inner_tpid_de=2
[omcid] 19:58:11 ME    PRN: 171@257 Override entry (new) filter_outer_prio=15,filter_outer_vid=4096,filter_outer_tpid_de=0,word1_padding=0 filter_inner_prio=15,filter_inner_vid=101,filter_inner_tpid_de=5,word2_padding=0,filter_ether_type=0 treatment_tags_remove=0,word3_padding=2,treatment_outer_prio=15,treatment_outer_vid=0,treatment_outer_tpid_de=0 word4_padding=0,treatment_inner_prio=0,treatment_inner_vid=101,treatment_inner_tpid_de=2
[omcid] 19:58:11 ME    PRN: 171@257 Overridden table entry (entries num = 6)
[omcid] 19:58:11 MIB   PRN: Incremented MIB sequence number (39)
[omcid] 19:58:11 MSG   PRN: OMCI #260 TX:
 48 10 28 0a 00 ab 01 01 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00
[omcid] 19:58:11 MSG   PRN: OMCI #258 RX:
 48 11 48 0a 00 ab 01 01 04 00 f8 00 00 00 f0 32
 d0 01 00 2f 00 00 00 0a 03 2a 00 00 00 00 00 00
 00 00 00 00 00 00 00 00
[omcid] 19:58:11 CORE  PRN: 171@257 set RX frame VLAN table       = f8 00 00 00 f0 32 d0 01 00 2f 00 00 00 0a 03 2a
[omcid] 19:58:11 ME    PRN: 171@257 Add entry filter_outer_prio=15,filter_outer_vid=4096,filter_outer_tpid_de=0,word1_padding=0 filter_inner_prio=15,filter_inner_vid=101,filter_inner_tpid_de=5,word2_padding=0,filter_ether_type=1 treatment_tags_remove=0,word3_padding=2,treatment_outer_prio=15,treatment_outer_vid=0,treatment_outer_tpid_de=0 word4_padding=0,treatment_inner_prio=10,treatment_inner_vid=101,treatment_inner_tpid_de=2
[omcid] 19:58:11 ME    PRN: 171@257 Added table entry (entries num = 7)
[omcid] 19:58:12 MIB   PRN: Incremented MIB sequence number (40)
[omcid] 19:58:12 MSG   PRN: OMCI #261 TX:
 48 11 28 0a 00 ab 01 01 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00
[omcid] 19:58:12 MSG   PRN: OMCI #259 RX:
 48 12 48 0a 00 ab 01 01 04 00 f8 00 00 00 80 00
 50 00 40 2f 00 00 00 08 03 2a 00 00 00 00 00 00
 00 00 00 00 00 00 00 00
[omcid] 19:58:12 CORE  PRN: 171@257 set RX frame VLAN table       = f8 00 00 00 80 00 50 00 40 2f 00 00 00 08 03 2a
[omcid] 19:58:12 ME    PRN: 171@257 Add entry filter_outer_prio=15,filter_outer_vid=4096,filter_outer_tpid_de=0,word1_padding=0 filter_inner_prio=8,filter_inner_vid=0,filter_inner_tpid_de=5,word2_padding=0,filter_ether_type=0 treatment_tags_remove=1,word3_padding=2,treatment_outer_prio=15,treatment_outer_vid=0,treatment_outer_tpid_de=0 word4_padding=0,treatment_inner_prio=8,treatment_inner_vid=101,treatment_inner_tpid_de=2
[omcid] 19:58:12 ME    PRN: 171@257 Added table entry (entries num = 8)
[omcid] 19:58:12 MIB   PRN: Incremented MIB sequence number (41)
[omcid] 19:58:12 MSG   PRN: OMCI #262 TX:
 48 12 28 0a 00 ab 01 01 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00
[omcid] 19:58:12 MSG   PRN: OMCI #260 RX:
 48 13 44 0a 01 0c 07 fe 07 fe 00 00 02 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00
[omcid] 19:58:12 MIB   PRN: Create "GEM port network CTP" (268) with instance id = 2046
[omcid] 19:58:12 CORE  PRN: 268@2046 set Port id value             = 0x07fe (2046)
[omcid] 19:58:12 CORE  PRN: 268@2046 set T-CONT ptr                = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Direction                 = 0x02 (2)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Traffic manage ptr US     = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Traffic desc prof ptr US  = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set UNI counter               = 0x00 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Priority queue ptr DS     = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Encryption state          = 0x00 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Traffic desc prof ptr DS  = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Port id value             = 0x07fe (2046)
[omcid] 19:58:12 CORE  PRN: 268@2046 set T-CONT ptr                = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Direction                 = 0x02 (2)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Traffic manage ptr US     = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Traffic desc prof ptr US  = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Priority queue ptr DS     = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 268@2046 set Traffic desc prof ptr DS  = 0x0000 (0)
[omcid] 19:58:12 MIB   PRN: Incremented MIB sequence number (42)
[omcid] 19:58:12 MSG   PRN: OMCI #263 TX:
 48 13 24 0a 01 0c 07 fe 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00
[omcid] 19:58:12 MSG   PRN: OMCI #261 RX:
 48 14 44 0a 01 0a 07 fe 07 fe 06 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00
[omcid] 19:58:12 MIB   PRN: Create "GEM interworking TP" (266) with instance id = 2046
[omcid] 19:58:12 CORE  PRN: 266@2046 set GEM port network CTP ptr  = 0x07fe (2046)
[omcid] 19:58:12 CORE  PRN: 266@2046 set Interworking option       = 0x06 (6)
[omcid] 19:58:12 CORE  PRN: 266@2046 set Service profile ptr       = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 266@2046 set Interworking TP ptr       = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 266@2046 set PPTP counter              = 0x00 (0)
[omcid] 19:58:12 CORE  PRN: 266@2046 set GAL profile ptr           = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 266@2046 set GAL loopback config       = 0x00 (0)
[omcid] 19:58:12 CORE  PRN: 266@2046 set GEM port network CTP ptr  = 0x07fe (2046)
[omcid] 19:58:12 CORE  PRN: 266@2046 set Interworking option       = 0x06 (6)
[omcid] 19:58:12 CORE  PRN: 266@2046 set Service profile ptr       = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 266@2046 set Interworking TP ptr       = 0x0000 (0)
[omcid] 19:58:12 CORE  PRN: 266@2046 set GAL profile ptr           = 0x0000 (0)
[omcid] 19:58:12 MIB   PRN: Incremented MIB sequence number (43)
[omcid] 19:58:12 MSG   PRN: OMCI #264 TX:
 48 14 24 0a 01 0a 07 fe 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00

maxdata01 · « **Réponse #485 le:** 11 août 2023 à 23:12:20 »

256

Code: [Sélectionner]

root@SFP:/# omci_pipe.sh meg 256 0
Class ID    = 256 (ONU-G)
Instance ID = 0
Upload      = yes
Alarms      = 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
              0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-------------------------------------------------------------------------------
 0 Vendor id                     4b STR  R--A---P---
   0x50 0x54 0xXX 0xXX
   PTIN
-------------------------------------------------------------------------------
 1 Version                      14b STR  R--A---P---
   0x33 0x4e 0x54 0x37 0xXX 0x46 0xXX 0x31 0xXX 0x38 0x39 0x42 0x32 0x35
   3NT7SFU1389B25
-------------------------------------------------------------------------------
 2 Serial number                 8b STR  R--A---P---
   0x50 0x54 0xXX 0x4e 0x91 0xXX 0xXX 0xXX
   PTIN\x91G\xDXX
-------------------------------------------------------------------------------
 3 Traffic management opt        1b ENUM R----------
   0x00 (0)
-------------------------------------------------------------------------------
 4 VP/VC cc function option      1b UINT R---O------
   0x00 (0)
-------------------------------------------------------------------------------
 5 Battery backup                1b UINT RW-------E-
   0x00 (0)
-------------------------------------------------------------------------------
 6 Administrative state          1b UINT RW-------E-
   0x00 (0)
-------------------------------------------------------------------------------
 7 Operational state             1b UINT R--A-----E-
   0x00 (0)
-------------------------------------------------------------------------------
 8 ONU survival time             1b UINT R--------E-
   0x00 (0)
-------------------------------------------------------------------------------
R - Readable          O - Not supported (optional)
W - Writable          E - Excluded from MIB upload (template)
S - set-by-create     T - Table
A - Send AVC          V - Volatile
U - No upload         P - No swap
N - Not suported      Y - Partly supported
N - No swap

errorcode=0
root@SFP:/#

257

Code: [Sélectionner]

root@SFP:/# omci_pipe.sh meg 257 0
Class ID    = 257 (ONU2-G)
Instance ID = 0
Upload      = yes
Alarms      = -
-------------------------------------------------------------------------------
 0 Equipment id                 20b STR  R------P---
   0x47 0x53 0x30 0x3X 0x30 0xXX 0x47 0xXX 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
   GS0100GH\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
-------------------------------------------------------------------------------
 1 OMCC version                  1b ENUM R--A-------
   0x86 (134)
-------------------------------------------------------------------------------
 2 Vendor product code           2b UINT R---O------
   0x00cc (204)
-------------------------------------------------------------------------------
 3 Security capability           1b ENUM R----------
   0x01 (1)
-------------------------------------------------------------------------------
 4 Security mode                 1b ENUM RW---------
   0x01 (1)
-------------------------------------------------------------------------------
 5 Total priority queue num      2b UINT R----------
   0x0040 (64)
-------------------------------------------------------------------------------
 6 Total traffic scheduler       1b UINT R----------
   0x40 (64)
-------------------------------------------------------------------------------
 7 Mode                          1b ENUM R----------
   0x01 (1)
-------------------------------------------------------------------------------
 8 Total GEM port-ID number      2b UINT R---O------
   0x0040 (64)
-------------------------------------------------------------------------------
 9 SysUpTime                     4b UINT R---O------
   0x0000469c (18076)
-------------------------------------------------------------------------------
10 Connectivity capability       2b UINT R---O------
   0x007f (127)
-------------------------------------------------------------------------------
11 Current connect. mode         1b UINT RW--O------
   0x00 (0)
-------------------------------------------------------------------------------
12 QoS configuration flex        2b UINT R---O------
   0x0018 (24)
-------------------------------------------------------------------------------
13 Prio queue scale factor       2b UINT RW--O------
   0x0030 (48)
-------------------------------------------------------------------------------
R - Readable          O - Not supported (optional)
W - Writable          E - Excluded from MIB upload (template)
S - set-by-create     T - Table
A - Send AVC          V - Volatile
U - No upload         P - No swap
N - Not suported      Y - Partly supported
N - No swap

Asclèpios · « **Réponse #486 le:** 11 août 2023 à 23:29:22 »

Bonsoir que te donne gtop a

Citation de: maxdata01 le 11 août 2023 à 23:11:03

Merci pour l'aide Asclèpios pour répondre, je suis sur un SFP Huawei et un ERX-4, le firmware est le Modded 5.1 sur image 0.

gtop c - a
Code: [Sélectionner]
GPE status Name: ONU_GPE_STATUS_TABLE ID: 77 Table: 13 Type: ARRAY (0) Size: 25 Entry size: 32 Base: 0x0000 Packet Engine #0: [0000]: 00 00 00 00 [0001]: 00 00 00 00 [0002]: 00 19 00 00 [0003]: 00 00 00 00 [0004]: 00 19 00 00 [0005]: 00 00 00 00 [0006]: 00 19 00 00 [0007]: 00 00 00 00 [0008]: 00 19 00 00 [0009]: 00 00 00 00 [0010]: b0 80 00 00 [0011]: 00 00 00 00 [0012]: 00 19 00 00 [0013]: 00 00 00 00 [0014]: 00 00 00 00 [0015]: 00 00 00 00 [0016]: 87 80 00 00 [0017]: 00 00 00 00 [0018]: 87 80 00 00 [0019]: 00 00 00 00 [0020]: 87 80 00 00 [0021]: 00 00 00 00 [0022]: 00 00 00 00 [0023]: 00 00 00 00 [0024]: 00 00 00 00 Packet Engine #1: [0000]: 00 00 00 00 [0001]: 00 00 00 00 [0002]: 00 00 00 00 [0003]: 00 00 00 00 [0004]: 87 80 00 00 [0005]: 00 00 00 00 [0006]: 00 00 00 00 [0007]: 00 00 00 00 [0008]: 00 00 00 00 [0009]: 00 00 00 00 [0010]: 00 00 00 00 [0011]: 00 00 00 00 [0012]: 00 00 00 00 [0013]: 00 00 00 00 [0014]: 00 00 00 00 [0015]: 00 00 00 00

gtop c - y
Code: [Sélectionner]
GPE status Name: ONU_GPE_STATUS_TABLE ID: 77 GPE VLAN treatment Name: ONU_GPE_VLAN_TREATMENT_TABLE ID: 43 ;;;;tagb;tagb;tagb;taga;taga;taga no;inner not generate;outer not generate;discard enable;tpid;vid;treatment;tpid;vid;treatment 0;1;1;1; ; ;15; ; ;15 1;1;1; ;2; 101; 9; ; ;15 2;1;1; ;2; 101; 9; ; ;15 3; ; ;1; ; ;15; ; ;15 4;1;1; ;6; 101;10;4; ;15 5;1;1; ;6; 101; ;4; ;15 6;1; ; ; ; ;15; ; ;15 7; ; ; ; ; ;15; ; ;15 64;1;1; ;6; ; 9; ; ;15 65;1;1; ;6; 101; 9; ; ;15 66;1;1; ; ; ;15; ; ;15 67;1;1; ; ; ;15; ; ;15 68;1;1; ; ; ;15; ; ;15 69;1; ; ; ; ;15; ; ;15 70; ; ; ; ; ;15; ; ;15 128;1;1; ; ; ;15; ; ;15 129;1;1; ; ; ;15; ; ;15 130; ;1; ; ; ;15; ; ;15
Le fw print (j'ai mis des X un peux partout)

Code: [Sélectionner]
root@SFP:/# fw_printenv act_img_addr=0xBF20003C addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off addmisc=setenv bootargs ${bootargs} ethaddr=${ethaddr} machtype=${machtype} ignore_loglevel vpe1_load_addr=0x83f00000 vpe1_mem=1M mem=63M ${mtdparts} addmtdparts0=setenv mtdparts mtdparts=sflash:256k(uboot)ro,512k(uboot_env),7424k(linux),8192k(image1) addmtdparts1=setenv mtdparts mtdparts=sflash:256k(uboot)ro,512k(uboot_env),7424k(image0),8192k(linux) baudrate=115200 bertEnable=0 boot_image=run boot_image${c_img}; boot_image0=run kernel0_from_sf flashargs addip addmtdparts0 addmisc && bootm ${ram_addr} boot_image1=run kernel1_from_sf flashargs addip addmtdparts1 addmisc && bootm ${ram_addr} boot_image_err=setenv kernel_offs ${kernel0_offs};httpd && setenv image0_is_valid 1 bootcmd=run flash_flash commit=1 committed_image=0 env_offs=0x40000 env_offs_redund=0x80000 ethact=SERDES ethaddr=00:06:91:XX:XX:XX ethprime=SERDES fileaddr=80F00000 filesize=345000 flash_flash=run select_image boot_image flashargs=setenv bootargs rootfstype=squashfs,jffs2 gDtiaGentEnable=false gSerial=PTIN9147XXXX goi_calibrated=1 goi_config=begin-base64 644 goi_config@H4sIAIah1VgCA+2YS2/bOBCAfV3/Ci568KkKhXJLFXrI1mkRNEWD2HAPQSHI@Em0La5mGpLTdf79DK45lW2mLdtfXQ3Ow6XlwhpQ+chJTJX2XWXJ2dxmURVP@lyZaxqUposLMoimOvKT80PsuoSiS8803yuE3BUV74FMpfEYFZz1UAIMeob0T@yF1ZxQUhvcLa6nN+X7L/pPKEDC1Z2Yoki3g1N6RaGDL+Z21IlppVlc0yU/wZ@hmHf6Z5fnY8ubqKbi5dO84SMTb4mt6/fh+SyWpDbu3McjS5w8O4sd+MY57st@3/d9YKH0VKBC4NzjSoW03+vkhxDzOf6/H/1v5F8CUx3/Pxn/ecf/r8H/h3id@RtP0P6L/K/inDf6FRP7xk3X8n4b/dI9/x/k97ZPz62H013BLekgmeCWQ24kD@moe+9gCg4/iX4h9P7P8hh2NcCfEo/3gCbPjnQimJY4q3vxQd/6cQ2iHw2/Of@2NUsm28OgHp4Wv6Z6/kf7n+FfQL40u/4P4n06ydO8OGTwXxpp/Fy0P/D3Qh2@RV7Ey2xaxG48znKDO4UN/4BRCJ5S8RTomMIzkCEpkyJbV2SiPOnxkLx9cX7l@fggPQvLyXT30B/29XIVrN8oDZYV9hsGEd4Wpe9FyV8ymHSmTeLn5z9TSfiQD@6uF79ZjHIpsvHlz2sqRJmkTY4x4mx5LKPKsqUzxiidb2ozNuE17TiJIBKN1Q@gVP5gsuDOXK7yirbCB5n8as4W0XXV26Onf4NLqKx8bXdb4uDPf1xHNpZWxz7@QhzbixvihuJ+0roQFgA9ssHWpmVrHBYC+Na0xm1sLXPSuhCMa8/nbKCDhm1X@pBb76vv6NFV7y/5U1XrqKakYD4JABIrvXC5zm7o3qV6c7/kAMqCMc/84q1uG@8o/TOr2ElrzO4Ak875TSQUB1W9rN3nhYFCjGdHOWYWOHfHqcFvUa+HFW1HMv@kCCYAoa527Kij/TwWQotgVN9CG5u4hL5zM2qaqBHX0dj9+cBFiwauz/e4uh2@mSs86QNQiulGaTej0WUEPKBpXPy9dcVrgWuNa2aixbM5Kfh+oLTSnIugxXUd@F/HULrNk68+o8rXmAmhweC7Y/O5AM7VlvJv0ytr1G5uaDR57frOkzHZ+ryYj@zPRphhca+nU9RieddPJjyr9EYZGwABwAAA==@====@ gphy0_phyaddr=0 gphy1_phyaddr=1 image0_addr=0xB00C0000 image0_is_valid=1 image1_addr=0xB0800000 image_name=openwrt-lantiq-falcon-SFP kernel0_from_sf=sf probe 0;sf read ${ram_addr} ${kernel0_offs} ${max_kernel_size} kernel0_offs=0xC0000 kernel1_from_sf=sf probe 0;sf read ${ram_addr} ${kernel1_offs} ${max_kernel_size} kernel1_offs=0x800000 load_kernel=tftp ${ram_addr} ${tftppath}${image_name}-uImage load_uboot=tftp ${ram_addr} ${tftppath}u-boot.img machtype=SFP magic_addr=0xBF200038 magic_val=0xDEADBEEF max_kernel_size=180000 nDyingGaspEnable=0 nSerial=PTIN9147XXXX net_nfs=run load_kernel nfsargs addip addmtdparts0 addmisc;bootm ${ram_addr} netmask=255.255.255.0 next_active=1 nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath},${nfsoptions} nfsoptions=rsize=1024,wsize=1024 olt_type=2 omci_vendor_pro=0 ont_serial=PTIN9147XXXX ram_addr=80F00000 reset_uboot_env=sf probe 0;sf erase 40000 80000 save_uboot=sf probe 0;sf erase 0 40000;sf write ${ram_addr} 0 ${filesize} select_image=setenv activate_image -1;if itest *${magic_addr} == ${magic_val} ; then if itest *${act_img_addr} == 0 ; then setenv activate_image 0;fi;if itest *${act_img_addr} == 1 ; then setenv activate_image 1;fi;mw ${magic_addr} 0x0;mw ${act_img_addr} 0x0;fi;if test $activate_image = -1 ; then setenv c_img $committed_image;else setenv c_img $activate_image;setenv activate_image -1;fi;if test $c_img = 0 && test $image0_is_valid = 0 ; then setenv c_img 1;fi;if test $c_img = 1 && test $image1_is_valid = 0 ; then setenv c_img 0;fi;if test $image0_is_valid = 0 && test $image1_is_valid = 0 ; then setenv c_img _err;fi;exit 0 serverip=192.168.1.100 stderr=serial stdin=serial stdout=serial tx_fault_pin=2 update_image0=tftp ${ram_addr} ${tftppath}${image_name}-squashfs.image;sf probe 0;sf erase ${kernel0_offs} +${filesize};sf write ${ram_addr} ${kernel0_offs} ${filesize} update_image1=tftp ${ram_addr} ${tftppath}${image_name}-squashfs.image;sf probe 0;sf erase ${kernel1_offs} +${filesize};sf write ${ram_addr} ${kernel1_offs} ${filesize} update_openwrt=run update_image0 && setenv committed_image 0 && setenv image0_is_valid 1 && saveenv update_uboot=run load_uboot && run save_uboot ver=U-Boot 2011.12-lantiq-gpon-1.2.24 (Nov 03 2014 - 22:46:28) ipaddr=192.168.1.10 gatewayip=192.168.2.1 bootdelay=5 asc0=0 preboot=gpio set 3;gpio input 2;gpio input 105;gpio input 106;gpio input 107;gpio input 108 target=oem-generic image0_version=3FE7SWS4040018 image1_version=3FE7SW04030009 onu_serial=PTIN9147XXXX onu_ploam=8V72ZIXX omci_vendor_id=PTIN omci_equip_id=GS0100GH nPassword=0x38 0x56 0x37 0xXX 0xXX 0x49 0x55 0x50 0x00 0x00 mib_file_custom=/root/custom.ini omci_hw_ver=3NT7SFU1389B25 omci_omcc_ver=134 omci_loid=user omci_lpwd=password sfp_a0_low_128=begin-base64 644 sfp_a0_low_128 @AwQBAAAAAgAAAAADDAAUyAAAAABMYW50aXEgICAgICAgICAgAAAAAEZhbGNv@biBTRlAgICAgICAwICAgBR4AbQAaAAAwMzJWUkoxMEs2MDAxNDI5MTkwNTA4@ICBo4AN1SjY5MjAwNDU5NSAgICAgICAgICAgICAgICAgICAgICAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAA==@====@ sfp_a2_info=begin-base64 644 sfp_a2_info @XwDOAFoA0wCMoHUwiLh5GK/IAACIuAAAm4Ii0HuGK9QJzwAXB8sAEAAAAAAA@AAAAAAAAAAAXAAAAAAAAAAAAAAAAAA/gAAAAAAAAAEAAAABAAAAAQAAAAEA@AAAAAABMK4CAhg/SNPEAQf////8AAAAA//8AAAAAcAEAAAAAAAD/////////@////////////MDMwMzJWUkoAAAAAAAD+Ff//////////////////////////@//////////8AAhQ4VjcyWklVUAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAJQVElOkUfZT////////////////////wAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAhCZ8gf96GAC5yQsrBGl/Z3HVGI84ZuqxREvF@GAdBaDtoOs/GhhCHqadMmHOf2ivmj2x02zuMxqZ2e3n4uaBjehZOAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAaRRPAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAABHUzAxMDBHSAAAAAAAAAAAAAAAAFBUSU4AAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA@AAAAAAAAAAAAAA==@====@ image1_is_valid=0 root@SFP:/#
Logs
Code: [Sélectionner]
[omcid] 19:58:11 MSG PRN: OMCI #257 RX: 48 10 48 0a 00 ab 01 01 04 00 f8 00 00 00 f0 32 d0 00 00 2f 00 00 00 00 03 2a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [omcid] 19:58:11 CORE PRN: 171@257 set RX frame VLAN table = f8 00 00 00 f0 32 d0 00 00 2f 00 00 00 00 03 2a [omcid] 19:58:11 ME PRN: 171@257 Override entry (old) filter_outer_prio=15,filter_outer_vid=4096,filter_outer_tpid_de=0,word1_padding=0 filter_inner_prio=15,filter_inner_vid=101,filter_inner_tpid_de=5,word2_padding=0,filter_ether_type=0 treatment_tags_remove=3,word3_padding=0,treatment_outer_prio=15,treatment_outer_vid=0,treatment_outer_tpid_de=0 word4_padding=0,treatment_inner_prio=15,treatment_inner_vid=101,treatment_inner_tpid_de=2 [omcid] 19:58:11 ME PRN: 171@257 Override entry (new) filter_outer_prio=15,filter_outer_vid=4096,filter_outer_tpid_de=0,word1_padding=0 filter_inner_prio=15,filter_inner_vid=101,filter_inner_tpid_de=5,word2_padding=0,filter_ether_type=0 treatment_tags_remove=0,word3_padding=2,treatment_outer_prio=15,treatment_outer_vid=0,treatment_outer_tpid_de=0 word4_padding=0,treatment_inner_prio=0,treatment_inner_vid=101,treatment_inner_tpid_de=2 [omcid] 19:58:11 ME PRN: 171@257 Overridden table entry (entries num = 6) [omcid] 19:58:11 MIB PRN: Incremented MIB sequence number (39) [omcid] 19:58:11 MSG PRN: OMCI #260 TX: 48 10 28 0a 00 ab 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [omcid] 19:58:11 MSG PRN: OMCI #258 RX: 48 11 48 0a 00 ab 01 01 04 00 f8 00 00 00 f0 32 d0 01 00 2f 00 00 00 0a 03 2a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [omcid] 19:58:11 CORE PRN: 171@257 set RX frame VLAN table = f8 00 00 00 f0 32 d0 01 00 2f 00 00 00 0a 03 2a [omcid] 19:58:11 ME PRN: 171@257 Add entry filter_outer_prio=15,filter_outer_vid=4096,filter_outer_tpid_de=0,word1_padding=0 filter_inner_prio=15,filter_inner_vid=101,filter_inner_tpid_de=5,word2_padding=0,filter_ether_type=1 treatment_tags_remove=0,word3_padding=2,treatment_outer_prio=15,treatment_outer_vid=0,treatment_outer_tpid_de=0 word4_padding=0,treatment_inner_prio=10,treatment_inner_vid=101,treatment_inner_tpid_de=2 [omcid] 19:58:11 ME PRN: 171@257 Added table entry (entries num = 7) [omcid] 19:58:12 MIB PRN: Incremented MIB sequence number (40) [omcid] 19:58:12 MSG PRN: OMCI #261 TX: 48 11 28 0a 00 ab 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [omcid] 19:58:12 MSG PRN: OMCI #259 RX: 48 12 48 0a 00 ab 01 01 04 00 f8 00 00 00 80 00 50 00 40 2f 00 00 00 08 03 2a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [omcid] 19:58:12 CORE PRN: 171@257 set RX frame VLAN table = f8 00 00 00 80 00 50 00 40 2f 00 00 00 08 03 2a [omcid] 19:58:12 ME PRN: 171@257 Add entry filter_outer_prio=15,filter_outer_vid=4096,filter_outer_tpid_de=0,word1_padding=0 filter_inner_prio=8,filter_inner_vid=0,filter_inner_tpid_de=5,word2_padding=0,filter_ether_type=0 treatment_tags_remove=1,word3_padding=2,treatment_outer_prio=15,treatment_outer_vid=0,treatment_outer_tpid_de=0 word4_padding=0,treatment_inner_prio=8,treatment_inner_vid=101,treatment_inner_tpid_de=2 [omcid] 19:58:12 ME PRN: 171@257 Added table entry (entries num = 8) [omcid] 19:58:12 MIB PRN: Incremented MIB sequence number (41) [omcid] 19:58:12 MSG PRN: OMCI #262 TX: 48 12 28 0a 00 ab 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [omcid] 19:58:12 MSG PRN: OMCI #260 RX: 48 13 44 0a 01 0c 07 fe 07 fe 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [omcid] 19:58:12 MIB PRN: Create "GEM port network CTP" (268) with instance id = 2046 [omcid] 19:58:12 CORE PRN: 268@2046 set Port id value = 0x07fe (2046) [omcid] 19:58:12 CORE PRN: 268@2046 set T-CONT ptr = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set Direction = 0x02 (2) [omcid] 19:58:12 CORE PRN: 268@2046 set Traffic manage ptr US = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set Traffic desc prof ptr US = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set UNI counter = 0x00 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set Priority queue ptr DS = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set Encryption state = 0x00 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set Traffic desc prof ptr DS = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set Port id value = 0x07fe (2046) [omcid] 19:58:12 CORE PRN: 268@2046 set T-CONT ptr = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set Direction = 0x02 (2) [omcid] 19:58:12 CORE PRN: 268@2046 set Traffic manage ptr US = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set Traffic desc prof ptr US = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set Priority queue ptr DS = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 268@2046 set Traffic desc prof ptr DS = 0x0000 (0) [omcid] 19:58:12 MIB PRN: Incremented MIB sequence number (42) [omcid] 19:58:12 MSG PRN: OMCI #263 TX: 48 13 24 0a 01 0c 07 fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [omcid] 19:58:12 MSG PRN: OMCI #261 RX: 48 14 44 0a 01 0a 07 fe 07 fe 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [omcid] 19:58:12 MIB PRN: Create "GEM interworking TP" (266) with instance id = 2046 [omcid] 19:58:12 CORE PRN: 266@2046 set GEM port network CTP ptr = 0x07fe (2046) [omcid] 19:58:12 CORE PRN: 266@2046 set Interworking option = 0x06 (6) [omcid] 19:58:12 CORE PRN: 266@2046 set Service profile ptr = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 266@2046 set Interworking TP ptr = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 266@2046 set PPTP counter = 0x00 (0) [omcid] 19:58:12 CORE PRN: 266@2046 set GAL profile ptr = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 266@2046 set GAL loopback config = 0x00 (0) [omcid] 19:58:12 CORE PRN: 266@2046 set GEM port network CTP ptr = 0x07fe (2046) [omcid] 19:58:12 CORE PRN: 266@2046 set Interworking option = 0x06 (6) [omcid] 19:58:12 CORE PRN: 266@2046 set Service profile ptr = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 266@2046 set Interworking TP ptr = 0x0000 (0) [omcid] 19:58:12 CORE PRN: 266@2046 set GAL profile ptr = 0x0000 (0) [omcid] 19:58:12 MIB PRN: Incremented MIB sequence number (43) [omcid] 19:58:12 MSG PRN: OMCI #264 TX: 48 14 24 0a 01 0a 07 fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

G8U5 · « **Réponse #487 le:** 12 août 2023 à 09:18:56 »

Pour un SFP FS.com avec le modded 5.1, connexion fonctionnelle, voici ce que ça donne:

gtop c - y

Code: [Sélectionner]

GPE VLAN treatment

Name:        ONU_GPE_VLAN_TREATMENT_TABLE
ID:          43
;;;;tagb;tagb;tagb;taga;taga;taga
no;inner not generate;outer not generate;discard enable;tpid;vid;treatment;tpid;vid;treatment
0;1;1;1; ;    ;15; ;    ;15
1;1;1; ;2; 101; 9; ;    ;15
2;1;1; ;2; 101; 9; ;    ;15
3; ; ;1; ;    ;15; ;    ;15
4;1;1; ;6; 101;10;4;    ;15
5;1;1; ;6; 101;  ;4;    ;15
6;1; ; ; ;    ;15; ;    ;15
7; ; ; ; ;    ;15; ;    ;15
64;1;1; ;6;    ; 9; ;    ;15
65;1;1; ;6; 101; 9; ;    ;15
66;1;1; ; ;    ;15; ;    ;15
67;1;1; ; ;    ;15; ;    ;15
68;1;1; ; ;    ;15; ;    ;15
69;1; ; ; ;    ;15; ;    ;15
70; ; ; ; ;    ;15; ;    ;15
128;1;1; ; ;    ;15; ;    ;15
129;1;1; ; ;    ;15; ;    ;15
130; ;1; ; ;    ;15; ;    ;15

gtop a

Code: [Sélectionner]

OPTION                                             VALUE
PLOAM state                                        5
Downstream FEC enable                              yes
Upstream FEC enable                                yes
PLOAMd message waiting in buffer                   no
PLOAMd message buffer overflow                     no
Receive state machine status                       sync
Receive superframe state machine status            sync
PEE received                                       no
ONU ID                                             121
Start Offset enable                                no
[0] Interface mode                                 15
[0] PHY status                                     4
[0] PHY duplex                                     1
[0] WOL status                                     0

J'ai bien l'impression que tu es connecté @Maxdata. @Asclèpios confirmes tu qu'il s'agit maintenant d'envoyer les bonnes options DHCP ?

@Maxdata, j'ai passé la version omcc à 0xa0 (160), et ça fonctionne.
Sur ton ER-X, tu es sous routerOS ou openWRT?
D'ailleurs, ton router est un ER-4 ou un ERX-SFP ?

maxdata01 · « **Réponse #488 le:** 12 août 2023 à 09:40:43 »

hello c'est un ERX-SFP avec OpenWRT

gtop a

Code: [Sélectionner]

OPTION                                             VALUE
PLOAM state                                        5
Downstream FEC enable                              yes
Upstream FEC enable                                yes
PLOAMd message waiting in buffer                   no
PLOAMd message buffer overflow                     no
Receive state machine status                       sync
Receive superframe state machine status            sync
PEE received                                       no
ONU ID                                             91
Start Offset enable                                no
[0] Interface mode                                 15
[0] PHY status                                     4
[0] PHY duplex                                     1
[0] WOL status                                     0

Asclèpios · « **Réponse #489 le:** 12 août 2023 à 09:47:59 »

Tout est OK pour toi ton gtop a est bon + gtop c y avec

Code: [Sélectionner]

VLAN
Te reste à brancher l’ONU au routeur à spécifier l’option 60 dans le dhcp-client et tu devrait avoir une IPv4

Pour l’IPv6 je ne l’ai pas encore il faut que je vois de mon côté .

Pour la VOiP avec SFR : https://lafibre.info/remplacer-sfr/probleme-dinstallation-bypass-voip-red-avec-gigaset-c530-ip/

Citation de: maxdata01 le 12 août 2023 à 09:40:43

hello c'est un ERX-SFP avec OpenWRT

gtop a

Code: [Sélectionner]
OPTION VALUE PLOAM state 5 Downstream FEC enable yes Upstream FEC enable yes PLOAMd message waiting in buffer no PLOAMd message buffer overflow no Receive state machine status sync Receive superframe state machine status sync PEE received no ONU ID 91 Start Offset enable no [0] Interface mode 15 [0] PHY status 4 [0] PHY duplex 1 [0] WOL status 0

Code: [Sélectionner]

G8U5 · « **Réponse #490 le:** 12 août 2023 à 10:20:39 »

@Maxdata
Peux-tu faire un screenshot de /Network/Interfaces/devices et /Network/Interfaces depuis LuCI stp.
Attention aux MAC Addresses.

G8U5 · « **Réponse #491 le:** 12 août 2023 à 10:31:27 »

@Asclèpios
J'ai trouvé ça, ici: https://lafibre.info/remplacer-sfr/ftth-remplacer-sa-box-nb6vac-par-un-routeur-dga4130-ou-dga4132-roote/msg912007/#msg912007

Citer

config interface 'wan'
   option auto '1'
   option demand '0'
   option peerdns '1'
   option reqopts '1 3 6 15 26 33 42 51 121 249'
   option keepalive_adaptive '0'
   option dns_metric '0'
   option proto 'dhcp'
   option vendorid 'neufbox_DGA4130'
   option ipv6 '1'
   option ifname 'eth4'
   option macaddr 'xx:xx:xx:xx:xx:xx'

config config 'config'
   option wan_mode 'dhcp'

config interface 'wan6'
   option ifname '@wan'
   option proto 'dhcpv6'
   option reqopts '12 17 21 22 23 24 25 31 56 64 67 82 83'
   option noslaaconly '1'
   option iface_464xlat '0'
   option dns_metric '20'
   option auto '1'
   option vendorclass '0000a00c00416e657566626f785f4e42365641432d4658432d72305f4e42365641432d4d41494e2d52342e302e34346a5f4e42365641432d5844534c2d41327076364630333970'
   option clientid '00030001xxxxxxxxxxxx'