alors j'ai donc un show interfaces comme ceci
kaktuss@erl-3:~$ show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
br0 - u/u bro -> eth0.838 LIVEBOX
(VoD)
br1 - u/u br1 -> eth0.840 LIVEBOX
(ZAPPING + CANAL 1)
eth0 - u/u eth0 ONT (FIBRE RJ45)
eth0.832 90.46.67.239/21 u/u eth0.832 (INTERNET + VOIP +
CANAL 2)
eth0.838 - u/u eth0.838 (VoD)
eth0.840 - u/u eth0.840 (ZAPPING + CANAL 1)
eth1 - u/u eth1 VERS LIVEBOX
eth1.832 192.168.2.1/24 u/u eth0.832 LIVEBOX (INTERNET +
VOIP + CANAL 2)
eth1.838 - u/u eth1.838 LIVEBOX (VoD)
eth1.840 - u/u eth1.840 LIVEBOX (ZAPPING +
CANAL 1)
eth2 192.168.10.1/24 u/u eth2 LOCAL LAN SWITCH
lo 127.0.0.1/8 u/u
::1/128
kaktuss@erl-3:~$
et le verbose de dibbler-client semble pourtant indiqué qu'il à bien reçu mon prefixe mais il n'est pas attribué??
root@erl-3:/etc/dibbler# service dibbler-client
force-reload reload restart start stop
root@erl-3:/etc/dibbler# service dibbler-client stop
Stopping DHCPv6 client: dibbler-client.
root@erl-3:/etc/dibbler# dibbler-client run
| Dibbler - a portable DHCPv6, version 1.0.1 (CLIENT, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
2018.07.17 17:04:38 Client Notice My pid (19190) is stored in /var/lib/dibbler/client.pid
2018.07.17 17:04:38 Client Notice Detected iface eth0.840/13, MAC=dc:9f:db:80:04:8c.
2018.07.17 17:04:38 Client Notice Detected iface eth1.832/12, MAC=dc:9f:db:80:04:8d.
2018.07.17 17:04:38 Client Notice Detected iface eth1.838/11, MAC=dc:9f:db:80:04:8d.
2018.07.17 17:04:38 Client Notice Detected iface eth0.832/10, MAC=dc:9f:db:80:04:8c.
2018.07.17 17:04:38 Client Notice Detected iface eth1.840/9, MAC=dc:9f:db:80:04:8d.
2018.07.17 17:04:38 Client Notice Detected iface eth0.838/8, MAC=dc:9f:db:80:04:8c.
2018.07.17 17:04:38 Client Notice Detected iface br0/7, MAC=dc:9f:db:80:04:8c.
2018.07.17 17:04:38 Client Notice Detected iface br1/6, MAC=dc:9f:db:80:04:8c.
2018.07.17 17:04:38 Client Notice Detected iface imq0/5, MAC=.
2018.07.17 17:04:38 Client Notice Detected iface eth2/4, MAC=dc:9f:db:80:04:8e.
2018.07.17 17:04:38 Client Notice Detected iface eth1/3, MAC=dc:9f:db:80:04:8d.
2018.07.17 17:04:38 Client Notice Detected iface eth0/2, MAC=dc:9f:db:80:04:8c.
2018.07.17 17:04:38 Client Notice Detected iface lo/1, MAC=00:00:00:00:00:00.
2018.07.17 17:04:38 Client Notice Parsing /etc/dibbler/client.conf config file...
2018.07.17 17:04:38 Client Info Interface eth0.832/10 configuration has been loaded.
2018.07.17 17:04:38 Client Info My DUID is 00:01:00:01:1c:37:4e:44:dc:9f:db:80:04:8c.
2018.07.17 17:04:38 Client Info Loading old address database (client-AddrMgr.xml), using built-in routines.
2018.07.17 17:04:38 Client Info DB timestamp:1531839870, now()=1531839878, db is 8 second(s) old.
2018.07.17 17:04:38 Client Notice Creating control (::) socket on the lo/1 interface.
2018.07.17 17:04:38 Client Notice Creating socket (addr=fe80::de9f:dbff:fe80:48c) on eth0.832/10 interface.
2018.07.17 17:04:38 Client Notice CONFIRM support compiled in.
2018.07.17 17:04:38 Client Info Creating SOLICIT message with 0 IA(s), no TA and 1 PD(s) on eth0.832/10 interface.
2018.07.17 17:04:38 Client Error AUTH: protocol 10417976 not supported yet.
2018.07.17 17:04:38 Client Info Received ADVERTISE on eth0.832/10,trans-id=0xf74880, 5 opts: 25 2 1 11 7
2018.07.17 17:04:38 Client Info ADVERTISE message with preference set to 255 received, so wait time for other possible ADVERTISE messages is skipped.
2018.07.17 17:04:38 Client Info Creating REQUEST. Backup server list contains 1 server(s).
2018.07.17 17:04:38 Client Error AUTH: protocol 10418152 not supported yet.
2018.07.17 17:04:38 Client Info Received REPLY on eth0.832/10,trans-id=0xadcbb3, 4 opts: 25 2 1 11
2018.07.17 17:04:38 Client Warning PD: Prefix 2a01:cb08:652:ac00::/56 is already assigned to this PD.
2018.07.17 17:04:38 Client Notice PD: Adding prefix 2a01:cb08:652:ac00::/56 to all interfaces (prefix will be split to /64 prefixes if necessary).
2018.07.17 17:04:38 Client Info PD: Using 0 suitable interface(s):[none]
2018.07.17 17:04:38 Client Warning All IA(s), TA and PD(s) has been configured, but some options (23 16 15 ) were not assigned.
2018.07.17 17:04:38 Client Notice Insist-mode disabled, giving up (not sending INF-REQUEST).