Hello à tous,
Merci pour ce merveilleux post j'ai un petit problème sur une LB5 2gbits, j'ai suivi le tuto à la lettre et plusieurs fois sur différents systèmes DD-WRT. J'ai un routeur ASUS RT-AC5300 sur lequel j'ai installé DD-WRT mais celui ci ne me remonte pas l'adresse IP publique. La config me semble correcte mais j'ai un problème aussi sur l'IGMP et sur l'IPV6 je vous met le debug ci-dessous :
=== DEBUG START ===
=== Router model
Asus RT-AC5300
39137
Linux DD-WRT 4.4.176 #5118 SMP Sun Mar 10 09:28:18 CET 2019 armv7l DD-WRT
=== before: swconfig
/tmp/.rc_startup: line 48: swconfig: not found
=== before: swconfig vlan config
/tmp/.rc_startup: line 50: swconfig: not found
=== before: /proc number of vlans
16385
=== before: /proc/switch/
dr-xr-xr-x 4 root root 0 Jan 1 01:00 eth0
=== before: /proc vlan config
/proc/switch/eth0/vlan/1/ports:1 2 3 4 5 7 8t
/proc/switch/eth0/vlan/2/ports:0 8t*
=== before: wan_default
vlan2
=== detect: wanif eth0
=== detect: wanprt 0t 8t
=== after: swconfig vlan config
/tmp/.rc_startup: line 178: swconfig: not found
=== after: /proc vlan config
/proc/switch/eth0/vlan/1/ports:1 2 3 4 5 7 8t
/proc/switch/eth0/vlan/832/ports:0t 8t
=== after: vlan maps
eth0.832 VID: 832 REORDER_HDR: 1 dev->priv_flags: 1
total frames received 0
total bytes received 0
Broadcast/Multicast Rcvd 0
total frames transmitted 22
total bytes transmitted 6256
Device: eth0
INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
EGRESS priority mappings: 0:6 1:0 2:0 3:0 4:0 5:0 6:0 7:0
eth0.840 VID: 840 REORDER_HDR: 1 dev->priv_flags: 1
total frames received 2
total bytes received 92
Broadcast/Multicast Rcvd 2
total frames transmitted 8
total bytes transmitted 888
Device: eth0
INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
EGRESS priority mappings: 0:5 1:5 2:5 3:5 4:5 5:5 6:5 7:5
=== after: ifconfig
br0 Link encap:Ethernet HWaddr 34:97:F6:6E:BE:30
inet addr:192.16...
inet6 addr: fe80:...
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3412 errors:0 dropped:96 overruns:0 frame:0
TX packets:3519 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:295695 (288.7 KiB) TX bytes:4186062 (3.9 MiB)
eth0 Link encap:Ethernet HWaddr 34:97:F6:6E:BE:30
inet6 addr: fe80:...
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:816 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:204 (204.0 B) TX bytes:134972 (131.8 KiB)
Interrupt:181 Base address:0x6000
eth0.832 Link encap:Ethernet HWaddr 00:00:00:00:00:01
inet6 addr: fe80:...
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:6256 (6.1 KiB)
eth0.840 Link encap:Ethernet HWaddr 34:97:F6:6E:BE:30
inet addr:192.16...
inet6 addr: fe80:...
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:92 (92.0 B) TX bytes:888 (888.0 B)
eth1 Link encap:Ethernet HWaddr 34:97:F6:6E:BE:30
inet6 addr: fe80:...
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:10 overruns:0 frame:0
TX packets:680 errors:0 dropped:4 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:109256 (106.6 KiB)
eth2 Link encap:Ethernet HWaddr 34:97:F6:6E:BE:44
inet6 addr: fe80:...
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:9 overruns:0 frame:0
TX packets:681 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:110196 (107.6 KiB)
eth3 Link encap:Ethernet HWaddr 34:97:F6:6E:BE:58
inet6 addr: fe80:...
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3317 errors:0 dropped:9 overruns:0 frame:0
TX packets:3523 errors:0 dropped:1 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:289030 (282.2 KiB) TX bytes:4186610 (3.9 MiB)
ip6tnl0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:1452 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0....
inet6 addr: ::1/1...
UP LOOPBACK RUNNING MULTICAST MTU:65536 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:192 (192.0 B) TX bytes:192 (192.0 B)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
teql0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
vlan1 Link encap:Ethernet HWaddr 34:97:F6:6E:BE:30
inet6 addr: fe80:...
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:684 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:110334 (107.7 KiB)
=== after: bridge
bridge name bridge id STP enabled interfaces
br0 8000.3497f66ebe30 no eth1
eth2
eth3
vlan1
=== after: udhcpc
1130 root 1208 S udhcpc -i eth0.832 -p /var/run/udhcpc.pid -s /tmp/udhcpc -O routes -O msstaticroutes -O staticroutes -x 0x5a:000000... -x 0x3d:01F808... -V sagem -x 0x4d:2B4653...
=== after: dhcp6c
=== after: dhcp6c config
cat: can't open '/tmp/dhcp6c.conf': No such file or directory
=== after: dnsmasq
=== after: igmprt
=== after: igmprt config
cat: can't open '/tmp/igmpproxy.conf': No such file or directory
=== DEBUG END ===
Merci d'avance si vous pouvez m'apporter une réponse
A priori, je dirais que le problème est plutôt simple, le script fournit fonctionne avec la commande swconfig qui n'est pas supporté sur les chipset BCM47xxxx donc faut que je regarde pour adapter le script.
J'ai le même problème avec un Netgear R8000.
Edit: Après avoir lu le script le "not found" sur la command swconfig ne veut rien dire car le script est bien compatible avec les routeurs ne disposant pas de swconfig. Donc le problème est ailleurs.
Edit2: Tout fonctionne de mon coté, j'ai l'impression que le lancement du service udhcpc chez moi est très capricieux dès que je touche a certain réglage dans le GUI, et je n'ai pas trouvé de moyen de le relancer manuellement.
J'ai regardé plus en détails tes log de debug et tu as 0 packets reçu sur le RX de eth0.832, donc le souci est que tu reçois jamais de DHCP offer depuis le réseau Orange, donc faut creuser a priori d'après /proc/switch/eth0/vlan/832/ports le port 0 correspond au port WAN chez toi (j'ai pas la meme chose de mon coté mais c'est pas le meme routeur). Donc je dirais de vérifier tes login/motdepasse ainsi adresse mac et numéro de serie.