Krome,
suite a tes conseils, j'ai donc fait une install propre de pfsense 2.1.4 patché par nwks
configuré comme les screenshots 2 posts plus haut.
et toujours pas d'ip sur le bridge...
ici mon dhclient:
interface "bridge0" {
timeout 60;
retry 15;
select-timeout 0;
request subnet-mask, routers, ntp-servers, www-server;
send vendor-class-identifier "sagem";
send user-class "'FSVDSL_livebox.MLTV.softathome.Livebox3";
send dhcp-client-identifier 1:40:XX:XX:XX:8F:F4;
initial-interval 1;
script "/sbin/dhclient-script";
}
et quand je dump comme ceci:
tcpdump -vvv -ei em1 -s 65535 vlan 838
je vois bien un discover mais il tourne en rond sans OFFER en retour....
tcpdump: WARNING: em1: no IPv4 address assigned
tcpdump: listening on em1, link-type EN10MB (Ethernet), capture size 65535 bytes
17:39:43.237319 02:d5:0a:01:91:00 (oui Unknown) > Broadcast, ethertype 802.1Q (0x8100), length 356: vlan 838, p 4, ethertype IPv4, (tos 0x10, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 338)
0.0.0.0.bootpc > 255.255.255.255.bootps: [udp sum ok] BOOTP/DHCP, Request from 02:d5:0a:01:91:00 (oui Unknown), length 310, xid 0x20c5c305, secs 9, Flags [none] (0x0000)
Client-Ethernet-Address 02:d5:0a:01:91:00 (oui Unknown)
Vendor-rfc1048 Extensions
Magic Cookie 0x63825363
DHCP-Message Option 53, length 1: Discover
Client-ID Option 61, length 7: ether 40:XX:XX:XX:8f:f4
Hostname Option 12, length 7: "pfSense"
CLASS Option 77, length 40: "'FSVDSL_livebox.MLTV.softathome.Livebox3"
Parameter-Request Option 55, length 4:
Subnet-Mask, Default-Gateway, NTP, WWW
END Option 255, length 0
as tu une idée?
ma requete dhcp ne contien pas le vendor class identifier, est ce normal?