J'ai effectuer de nouvelle capture ....
![Indécis :-\](https://lafibre.info/Smileys/default/undecided.gif)
Mais rien ne change.
J'ai bien relus le tuto et j'ai repris ma config. J'ai un soucis sur la définition de l'adresse MAC, ma livebox "server" a son adresse mac qui se termine par ":76:FC" mais si je rajoute 4 à FC cela me fait une adresse mac du style ":76:100"
Quand je fais un tcpdump -vvv -ei re0 -s 65535 vlan 838 voila ce que j'obtiens. J'ai bien le DHCP discover et le DHCP Offer.
19:12:30.581111 02:5f:78:4c:dd:00 (oui Unknown) > Broadcast, ethertype 802.1Q (0x8100), length 357: vlan 838, p 0, ethertype IPv4, (tos 0x10, ttl 64, id 0, offset 0, flags [none], proto UDP (17), length 339)
0.0.0.0.bootpc > 255.255.255.255.bootps: [udp sum ok] BOOTP/DHCP, Request from 02:5f:78:4c:dd:00 (oui Unknown), length 311, xid 0x73226075, secs 6, Flags [none] (0x0000)
Client-Ethernet-Address 02:5f:78:4c:dd:00 (oui Unknown)
Vendor-rfc1048 Extensions
Magic Cookie 0x63825363
DHCP-Message Option 53, length 1: Discover
Client-ID Option 61, length 8: ether xx:xx:xx:xx:xx:76:00
Hostname Option 12, length 7: "pfsense"
CLASS Option 77, length 40: "'FSVDSL_livebox.MLTV.softathome.Livebox3"
Parameter-Request Option 55, length 4:
Subnet-Mask, Default-Gateway, NTP, WWW
END Option 255, length 0
19:12:30.581646 00:0d:b9:34:de:72 (oui Unknown) > 02:5f:78:4c:dd:00 (oui Unknown), ethertype 802.1Q (0x8100), length 346: vlan 838, p 0, ethertype IPv4, (tos 0x10, ttl 128, id 0, offset 0, flags [none], proto UDP (17), length 328)
pfsense.localdomain.bootps > 192.168.1.107.bootpc: [udp sum ok] BOOTP/DHCP, Reply, length 300, xid 0x73226075, secs 6, Flags [none] (0x0000)
Your-IP 192.168.1.107
Client-Ethernet-Address 02:5f:78:4c:dd:00 (oui Unknown)
Vendor-rfc1048 Extensions
Magic Cookie 0x63825363
DHCP-Message Option 53, length 1: Offer
Server-ID Option 54, length 4: pfsense.localdomain
Lease-Time Option 51, length 4: 7200
Subnet-Mask Option 1, length 4: 255.255.255.0
Default-Gateway Option 3, length 4: pfsense.localdomain
END Option 255, length 0
PAD Option 0, length 0, occurs 32
Voici l'extrait de mon fichier /etc/inc/interfaces.inc
$dhclientconf = "";
$dhclientconf = "";
if ($wanif == "bridge0") {
$dhclientconf .= <<<EOD
interface "{$wanif}" {
timeout 60;
retry 15;
select-timeout 0;
request subnet-mask, routers, ntp-servers, www-server;
send vendor-class-identifier "sagem";
send dhcp-client-identifier 1:xx:xx:xx:xx:xx:76:00;
send user-class "\047FSVDSL_livebox.MLTV.softathome.Livebox3";
initial-interval 1;
{$dhclientconf_hostname}
script "/sbin/dhclient-script";
EOD;
}
else {
$dhclientconf .= <<<EOD
interface "{$wanif}" {
timeout 60;
retry 15;
select-timeout 0;
initial-interval 1;
{$dhclientconf_hostname}
script "/sbin/dhclient-script";
EOD;
}
Et le détail du fichier /var/etc/dhclient_opt5.conf
interface "bridge0" {
timeout 60;
retry 15;
select-timeout 0;
request subnet-mask, routers, ntp-servers, www-server;
send vendor-class-identifier "sagem";
send dhcp-client-identifier 1:xx:xx:xx:xx:xx:76:00;
send user-class "'FSVDSL_livebox.MLTV.softathome.Livebox3";
initial-interval 1;
script "/sbin/dhclient-script";
Mais comme d'habitude je n'ai pas d'IP qui remonte sur mon bridge.
Quelqu'un à des idées ?