Auteur Sujet: Mise en route LEOX LXT-010H-D (Lu 73769 fois)

rooot · « **Réponse #96 le:** 15 septembre 2022 à 15:17:31 »

Citation de: marcinkuczera le 15 septembre 2022 à 15:06:51

What is original ONT in this case ?

the Original ONT From SFR : https://www.alticelabs.com/wp-content/uploads/2022/01/FL_GPON-ONT-SFU_ALB_EN.pdf
without the CATV port.

marcinkuczera · « **Réponse #97 le:** 15 septembre 2022 à 15:19:36 »

Ok, once LEOX is connected, please dump via console output of this:
omcicli mib get all

Marcin

rooot · « **Réponse #98 le:** 15 septembre 2022 à 15:27:43 »

well so i need to wait for the ONU, it's not even shipped at the moment

rooot · « **Réponse #99 le:** 15 septembre 2022 à 15:34:42 »

would it help if i actualy show you the output of this command but from my VSOL ONU ? you want to find some values coming from the OLT ?

hwti · « **Réponse #100 le:** 15 septembre 2022 à 15:40:33 »

Citation de: rooot le 15 septembre 2022 à 15:17:31

the Original ONT From SFR : https://www.alticelabs.com/wp-content/uploads/2022/01/FL_GPON-ONT-SFU_ALB_EN.pdf
without the CATV port.

Note that this ONT at least partially emulates the original Alacatel I-010G-Q on the LAN side (for the management commands used by the SFR router to program the PLOAM Password, and read the state / temperature / ...).

Originally SFR used I-010G-Q with ALCL OLT.
They also now use the Altice Labs ONT, even with ALCL OLT.
Newer OLT are made by Altice Labs, I don't know if they are only used with Altice Labs ONT, or also with I-010G-Q.
More recent SFR routers have integrated ONTs, and are made by Altice Labs :
- one supporting 2Gbps GPON offers with 2*1Gbps ports
- a new XGS-PON one with 8Gbps down / 1Gbps up offer (currently few people can subscribe, but there might be interest for XGS-PON ONTs later from people wanting to user their own router)

@rooot currently has issues with the VSOL V2802RH which is probably similar to the LXT-010H-D.
V2802RH uses RTL9601D + RTL8221B, it has two LAN ports (1Gbps + 2.5Gbps), but it doesn't run Linux like most (if not all) other known RTL9601D, but "OSK" (the image, after being uncompressed to RAM, contains no filesystem, only executable code and data including the custom webui files).

marcinkuczera · « **Réponse #101 le:** 15 septembre 2022 à 16:28:25 »

Citation de: rooot le 15 septembre 2022 à 15:34:42

would it help if i actualy show you the output of this command but from my VSOL ONU ? you want to find some values coming from the OLT ?

If it is in O5, you may try. I'am not sure about the result.
It may also require OMCI log, but - let's see MIBs first.

Florian · « **Réponse #102 le:** 15 septembre 2022 à 16:30:40 »

Citation de: hwti le 15 septembre 2022 à 15:40:33

N...Altice Labs :
...
- a new XGS-PON one with 8Gbps down / 1Gbps up offer (currently few people can subscribe, but there might be interest for XGS-PON ONTs later from people wanting to user their own router)

...

Yes, I'm already interested even if I'm not in a XGS-PON area. But it's the futur for SFR, Bouygues, Orange, so, since they probably wont provide external ONTs, we will need some

marcinkuczera · « **Réponse #103 le:** 15 septembre 2022 à 16:37:18 »

Citation de: hwti le 15 septembre 2022 à 15:40:33

Note that this ONT at least partially emulates the original Alacatel I-010G-Q on the LAN side (for the management commands used by the SFR router to program the PLOAM Password, and read the state / temperature / ...).

I-010G-Q - do you mean G-010G-Q ?
G-010G-Q is RTL9601B based ONT, not manufactured anymore.

Citer

More recent SFR routers have integrated ONTs, and are made by Altice Labs :
- one supporting 2Gbps GPON offers with 2*1Gbps ports

This one might use VEIP instead of EthUni interface for provisioning.
It is possible to emulate it with SFU, but I have not done it yet.

Citer

- a new XGS-PON one with 8Gbps down / 1Gbps up offer (currently few people can subscribe, but there might be interest for XGS-PON ONTs later from people wanting to user their own router)

maybe one day... frankly, ther is no case for XGSPON that would be reasonable to invest, for now..

Citer

@rooot currently has issues with the VSOL V2802RH which is probably similar to the LXT-010H-D.
V2802RH uses RTL9601D + RTL8221B, it has two LAN ports (1Gbps + 2.5Gbps), but it doesn't run Linux like most (if not all) other known RTL9601D, but "OSK" (the image, after being uncompressed to RAM, contains no filesystem, only executable code and data including the custom webui files).

I have it on my desk, will check later.

rooot · « **Réponse #104 le:** 15 septembre 2022 à 17:24:22 »

Citation de: marcinkuczera le 15 septembre 2022 à 16:28:25

If it is in O5, you may try. I'am not sure about the result.
It may also require OMCI log, but - let's see MIBs first.

here it is : https://justpaste.it/4vjql

hwti · « **Réponse #105 le:** 15 septembre 2022 à 22:47:10 »

Citation de: marcinkuczera le 15 septembre 2022 à 16:37:18

I-010G-Q - do you mean G-010G-Q ?

No really I-010G-Q : https://twitter.com/pierre80remy/status/1111563839957536769/photo/1
There is a huge size difference with the "more recent" Altice Labs (Lantiq PEB98021 with old SDK 7.4.4) https://twitter.com/pierre80remy/status/1111566146514374657/photo/1

Citation de: marcinkuczera le 15 septembre 2022 à 16:37:18

This one might use VEIP instead of EthUni interface for provisioning.
It is possible to emulate it with SFU, but I have not done it yet.

Not sure, there is no difference between the LAN ports, and there is Wifi too.
It's probably based on Broadcom BCM68360, I expect it to behave as an ONT followed by a router similar to the others, but with a 2.5Gbps link between (everything is in the same SoC).

Citation de: marcinkuczera le 15 septembre 2022 à 16:37:18

I have it on my desk, will check later.

You look at products from other manufacturers

rooot · « **Réponse #106 le:** 16 septembre 2022 à 07:47:47 »

http://www.xbest.pl/download/karty_katalogowe_pojedyncze/SPECYFIKACJA_ONT_GPON_LEOX_LXT-010G-D_(1xGE,_1xGPON),_SC-APC_ENG.pdf
the desciption says :

marcinkuczera · « **Réponse #107 le:** 16 septembre 2022 à 11:04:45 »

Citation de: rooot le 16 septembre 2022 à 07:47:47

http://www.xbest.pl/download/karty_katalogowe_pojedyncze/SPECYFIKACJA_ONT_GPON_LEOX_LXT-010G-D_(1xGE,_1xGPON),_SC-APC_ENG.pdf
the desciption says :

Yes, but this is not from private user perspective, it is from telco perspective.
Beware - this is normally telco equipment for telco operators. It is managed by telco.

With LEOX it is quite specific situation that you can buy it, but trust me - normally it is only for telco operators.

In general I recommend to read this document, it shows how it is managed, what options are possible etc..
https://www.broadband-forum.org/technical/download/TR-142_Issue-1.pdf