Auteur Sujet: Mise en route LEOX LXT-010H-D  (Lu 84090 fois)

0 Membres et 1 Invité sur ce sujet

rooot

  • Abonné RED by SFR fibre FttH
  • *
  • Messages: 2 014
  • 🔵🔵🔵🔵⚪⚪⚪⚪🔴🔴🔴🔴
Mise en route LEOX LXT-010H-D
« Réponse #96 le: 15 septembre 2022 à 15:17:31 »

marcinkuczera

  • Abonné FAI autre
  • *
  • Messages: 68
  • Pologne
Mise en route LEOX LXT-010H-D
« Réponse #97 le: 15 septembre 2022 à 15:19:36 »
Ok, once LEOX is connected, please dump via console output of this:
omcicli mib get all

Marcin

rooot

  • Abonné RED by SFR fibre FttH
  • *
  • Messages: 2 014
  • 🔵🔵🔵🔵⚪⚪⚪⚪🔴🔴🔴🔴
Mise en route LEOX LXT-010H-D
« Réponse #98 le: 15 septembre 2022 à 15:27:43 »
well so i need to wait for the ONU, it's not even shipped at the moment ;D

rooot

  • Abonné RED by SFR fibre FttH
  • *
  • Messages: 2 014
  • 🔵🔵🔵🔵⚪⚪⚪⚪🔴🔴🔴🔴
Mise en route LEOX LXT-010H-D
« Réponse #99 le: 15 septembre 2022 à 15:34:42 »
would it help if i actualy show you the output of this command but from my VSOL ONU ? you want to find some values coming from the OLT ?

hwti

  • Abonné Orange Fibre
  • *
  • Messages: 2 237
  • Chambly (60)
Mise en route LEOX LXT-010H-D
« Réponse #100 le: 15 septembre 2022 à 15:40:33 »
the Original ONT From SFR : https://www.alticelabs.com/wp-content/uploads/2022/01/FL_GPON-ONT-SFU_ALB_EN.pdf
without the CATV port.
Note that this ONT at least partially emulates the original Alacatel I-010G-Q on the LAN side (for the management commands used by the SFR router to program the PLOAM Password, and read the state / temperature / ...).

Originally SFR used I-010G-Q with ALCL OLT.
They also now use the Altice Labs ONT, even with ALCL OLT.
Newer OLT are made by Altice Labs, I don't know if they are only used with Altice Labs ONT, or also with I-010G-Q.
More recent SFR routers have integrated ONTs, and are made by Altice Labs :
 - one supporting 2Gbps GPON offers with 2*1Gbps ports
 - a new XGS-PON one with 8Gbps down / 1Gbps up offer (currently few people can subscribe, but there might be interest for XGS-PON ONTs later from people wanting to user their own router)

@rooot currently has issues with the VSOL V2802RH which is probably similar to the LXT-010H-D.
V2802RH uses RTL9601D + RTL8221B, it has two LAN ports (1Gbps + 2.5Gbps), but it doesn't run Linux like most (if not all) other known RTL9601D, but "OSK" (the image, after being uncompressed to RAM, contains no filesystem, only executable code and data including the custom webui files).

marcinkuczera

  • Abonné FAI autre
  • *
  • Messages: 68
  • Pologne
Mise en route LEOX LXT-010H-D
« Réponse #101 le: 15 septembre 2022 à 16:28:25 »
would it help if i actualy show you the output of this command but from my VSOL ONU ? you want to find some values coming from the OLT ?

If it is in O5, you may try. I'am not sure about the result.
It may also require OMCI log, but - let's see MIBs first.

Florian

  • Abonné Bbox fibre
  • *
  • Messages: 2 079
  • Drocourt (78)
Mise en route LEOX LXT-010H-D
« Réponse #102 le: 15 septembre 2022 à 16:30:40 »
N...Altice Labs :
 ...
 - a new XGS-PON one with 8Gbps down / 1Gbps up offer (currently few people can subscribe, but there might be interest for XGS-PON ONTs later from people wanting to user their own router)

...

Yes, I'm already interested even if I'm not in a XGS-PON area. But it's the futur for SFR, Bouygues, Orange, so, since they probably wont provide external ONTs, we will need some :)

marcinkuczera

  • Abonné FAI autre
  • *
  • Messages: 68
  • Pologne
Mise en route LEOX LXT-010H-D
« Réponse #103 le: 15 septembre 2022 à 16:37:18 »
Note that this ONT at least partially emulates the original Alacatel I-010G-Q on the LAN side (for the management commands used by the SFR router to program the PLOAM Password, and read the state / temperature / ...).

I-010G-Q - do you mean G-010G-Q ?
G-010G-Q is RTL9601B based ONT, not manufactured anymore.

Citer
More recent SFR routers have integrated ONTs, and are made by Altice Labs :
 - one supporting 2Gbps GPON offers with 2*1Gbps ports
This one might use VEIP instead of EthUni interface for provisioning.
It is possible to emulate it with SFU, but I have not done it yet.

Citer
- a new XGS-PON one with 8Gbps down / 1Gbps up offer (currently few people can subscribe, but there might be interest for XGS-PON ONTs later from people wanting to user their own router)
maybe one day... frankly, ther is no case for XGSPON that would be reasonable to invest, for now..

Citer
@rooot currently has issues with the VSOL V2802RH which is probably similar to the LXT-010H-D.
V2802RH uses RTL9601D + RTL8221B, it has two LAN ports (1Gbps + 2.5Gbps), but it doesn't run Linux like most (if not all) other known RTL9601D, but "OSK" (the image, after being uncompressed to RAM, contains no filesystem, only executable code and data including the custom webui files).
I have it on my desk, will check later.

rooot

  • Abonné RED by SFR fibre FttH
  • *
  • Messages: 2 014
  • 🔵🔵🔵🔵⚪⚪⚪⚪🔴🔴🔴🔴
Mise en route LEOX LXT-010H-D
« Réponse #104 le: 15 septembre 2022 à 17:24:22 »
If it is in O5, you may try. I'am not sure about the result.
It may also require OMCI log, but - let's see MIBs first.
here it is : https://justpaste.it/4vjql

hwti

  • Abonné Orange Fibre
  • *
  • Messages: 2 237
  • Chambly (60)
Mise en route LEOX LXT-010H-D
« Réponse #105 le: 15 septembre 2022 à 22:47:10 »
I-010G-Q - do you mean G-010G-Q ?
No really I-010G-Q : https://x.com/pierre80remy/status/1111563839957536769/photo/1
There is a huge size difference with the "more recent" Altice Labs (Lantiq PEB98021 with old SDK 7.4.4) https://x.com/pierre80remy/status/1111566146514374657/photo/1

This one might use VEIP instead of EthUni interface for provisioning.
It is possible to emulate it with SFU, but I have not done it yet.
Not sure, there is no difference between the LAN ports, and there is Wifi too.
It's probably based on Broadcom BCM68360, I expect it to behave as an ONT followed by a router similar to the others, but with a 2.5Gbps link between (everything is in the same SoC).


I have it on my desk, will check later.
You look at products from other manufacturers  ;D

rooot

  • Abonné RED by SFR fibre FttH
  • *
  • Messages: 2 014
  • 🔵🔵🔵🔵⚪⚪⚪⚪🔴🔴🔴🔴

marcinkuczera

  • Abonné FAI autre
  • *
  • Messages: 68
  • Pologne
Mise en route LEOX LXT-010H-D
« Réponse #107 le: 16 septembre 2022 à 11:04:45 »
http://www.xbest.pl/download/karty_katalogowe_pojedyncze/SPECYFIKACJA_ONT_GPON_LEOX_LXT-010G-D_(1xGE,_1xGPON),_SC-APC_ENG.pdf
the desciption says :



Yes, but this is not from private user perspective, it is from telco perspective.
Beware - this is normally telco equipment for telco operators. It is managed by telco.

With LEOX it is quite specific situation that you can buy it, but trust me - normally it is only for telco operators.


In general I recommend to read this document, it shows how it is managed, what options are possible etc..
https://www.broadband-forum.org/technical/download/TR-142_Issue-1.pdf