Auteur Sujet: Mise en route LEOX LXT-010H-D  (Lu 77184 fois)

0 Membres et 1 Invité sur ce sujet

rooot

  • Abonné RED by SFR fibre FttH
  • *
  • Messages: 1 834
  • 🔵🔵🔵🔵⚪⚪⚪⚪🔴🔴🔴🔴
Mise en route LEOX LXT-010H-D
« Réponse #192 le: 25 septembre 2022 à 12:30:10 »
Original ONT you have is from ALU/Nokia (firmware version format points to that vendor).
What is the model ?
my original ONT from SFR ?



Can you somehow dump mibs from that device ?
PM Sent

rooot

  • Abonné RED by SFR fibre FttH
  • *
  • Messages: 1 834
  • 🔵🔵🔵🔵⚪⚪⚪⚪🔴🔴🔴🔴
Mise en route LEOX LXT-010H-D
« Réponse #193 le: 25 septembre 2022 à 12:31:52 »
btw, normally is PPPoE used or just DHCP ?
DHCP only.

hwti

  • Abonné Orange Fibre
  • *
  • Messages: 2 237
  • Chambly (60)
Mise en route LEOX LXT-010H-D
« Réponse #194 le: 25 septembre 2022 à 14:54:57 »
Can you somehow dump mibs from that device ?
We probably need help from @maximushugus who has root access to the same ONT model.
But I don't know if it's the same OLT, so there could be differences.

The only vlan that may work, is 101, but I'am not sure if this is not for management purpose only..
VLAN 101 is probably the right one, which gets untagged by the original ONT.

marcinkuczera

  • Abonné FAI autre
  • *
  • Messages: 68
  • Pologne
Mise en route LEOX LXT-010H-D
« Réponse #195 le: 25 septembre 2022 à 17:31:11 »
VLAN 101 is probably the right one, which gets untagged by the original ONT.

So internal switch should forward frames outside.
It is strange not to see anything on counters..

If you send DHCP request, can you see anything on PON output ?

rooot

  • Abonné RED by SFR fibre FttH
  • *
  • Messages: 1 834
  • 🔵🔵🔵🔵⚪⚪⚪⚪🔴🔴🔴🔴
Mise en route LEOX LXT-010H-D
« Réponse #196 le: 25 septembre 2022 à 17:59:11 »
If you send DHCP request, can you see anything on PON output ?
the DHCP DISCOVER remain without any answer...0 traffic sent PON side

marcinkuczera

  • Abonné FAI autre
  • *
  • Messages: 68
  • Pologne
Mise en route LEOX LXT-010H-D
« Réponse #197 le: 25 septembre 2022 à 19:37:26 »
the DHCP DISCOVER remain without any answer...0 traffic sent PON side

Ok, so it is not forwarded internally from LAN to PON.

Can you please make a dump of that DHCP packet including all headers ?
some .pcap file ?



akeix

  • Abonné Bbox fibre
  • *
  • Messages: 158
  • Bourges (18)
    • Passion d'images
Mise en route LEOX LXT-010H-D
« Réponse #198 le: 25 septembre 2022 à 20:28:05 »
Can you please provide me with optical signal level (RX) ?
You can read it via WebGUI.

If there is a situation that it is near sensitivity cut-off, it may be that download goes well, but - on the upload it is bit asymetric.
I mean - it does not mean that if download has no errors, upload has no errors too.
Upload uses different wavelength that have different attenuation properties, and lasers are different with TX power fron ont to ont... (each unit is different).

At least we could say if log signal could be the reason.

With Livebox 5 :
  • Signal RxPower : -18.664dBm
  • Signal TxPower: 2.109dBm

With Leox LTX-010H-D :
  • Signal RxPower : -19.507160dBm
  • Signal TxPower: 2.484155dBm

rooot

  • Abonné RED by SFR fibre FttH
  • *
  • Messages: 1 834
  • 🔵🔵🔵🔵⚪⚪⚪⚪🔴🔴🔴🔴
Mise en route LEOX LXT-010H-D
« Réponse #199 le: 25 septembre 2022 à 20:34:17 »
Ok, so it is not forwarded internally from LAN to PON.

Can you please make a dump of that DHCP packet including all headers ?
some .pcap file ?
PM Sent

marcinkuczera

  • Abonné FAI autre
  • *
  • Messages: 68
  • Pologne
Mise en route LEOX LXT-010H-D
« Réponse #200 le: 25 septembre 2022 à 20:37:00 »
With Livebox 5 :
  • Signal RxPower : -18.664dBm
  • Signal TxPower: 2.109dBm

With Leox LTX-010H-D :
  • Signal RxPower : -19.507160dBm
  • Signal TxPower: 2.484155dBm

That is ok. And you also have a problem with uplink speed ? (errors on uplink ?)

cyayon

  • Abonné Orange Fibre
  • *
  • Messages: 648
  • Cordon 74 - Orange Fibre Pro
Mise en route LEOX LXT-010H-D
« Réponse #201 le: 25 septembre 2022 à 20:38:18 »
Here are different signal power :

1. With original orange ONT Huawei HG8010Hv6
TX Optical Power: 2.16dBm
RX Optical Power:   -16.90dBm

2. With ONT Leox LXT-010H-D
TX Optical Power: 1.109803dBm
RX Optical Power:   -17.099652dBm

I have no problem detected but Is this normal ?

marcinkuczera

  • Abonné FAI autre
  • *
  • Messages: 68
  • Pologne
Mise en route LEOX LXT-010H-D
« Réponse #202 le: 25 septembre 2022 à 20:45:43 »
Here are different signal power :

1. With original orange ONT Huawei HG8010Hv6
TX Optical Power: 2.16dBm
RX Optical Power:   -16.90dBm

2. With ONT Leox LXT-010H-D
TX Optical Power: 1.109803dBm
RX Optical Power:   -17.099652dBm

I have no problem detected but Is this normal ?

Yes, please check GPON Optics B+ specification, TX is in range.
RX is also ok, you are quite close to OLT.

akeix

  • Abonné Bbox fibre
  • *
  • Messages: 158
  • Bourges (18)
    • Passion d'images
Mise en route LEOX LXT-010H-D
« Réponse #203 le: 26 septembre 2022 à 06:11:59 »
That is ok. And you also have a problem with uplink speed ? (errors on uplink ?)

Hello

I'm really not good at English so I went through Google Translate.

Yes that's it.

My subscription is limited to 600MBit/s for upload speed. I get it when I directly use the livebox 5 with the fiber connected to it :
Fiber <====> Livebox 5 <====> PC

With the LEOX LTX-010H-D (or even with the LTX-010G-D), the upload speed is limited to 7 Mbit/s whether with the livebox 5 or with my OpenWRT router :
Fiber <====> LEOX <====> Livebox 5 (Eth4) (Or OpenWRT Router) <====> PC

By running the command "iperf3 -c speedtest.milkywan.fr -p 9201 -u -b 400M" on my router, I get the following results:

Connecting to host speedtest.milkywan.fr, port 9201
[  5] local 2a01:cb00:8173:8300::1 port 49013 connected to 2a0b:cbc0:42:1::1 port 9201
[ ID] Interval           Transfer     Bitrate         Total Datagrams
[  5]   0.00-1.00   sec  47.7 MBytes   400 Mbits/sec  34990
[  5]   1.00-2.00   sec  47.7 MBytes   400 Mbits/sec  35014
[  5]   2.00-3.00   sec  47.7 MBytes   400 Mbits/sec  35014
[  5]   3.00-4.00   sec  47.7 MBytes   400 Mbits/sec  35037
[  5]   4.00-5.00   sec  47.7 MBytes   400 Mbits/sec  35015
[  5]   5.00-6.00   sec  47.7 MBytes   400 Mbits/sec  35013
[  5]   6.00-7.00   sec  47.7 MBytes   400 Mbits/sec  35010
[  5]   7.00-8.00   sec  47.7 MBytes   400 Mbits/sec  35007
[  5]   8.00-9.00   sec  47.7 MBytes   400 Mbits/sec  35023
[  5]   9.00-10.00  sec  47.7 MBytes   400 Mbits/sec  34999
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Jitter    Lost/Total Datagrams
[  5]   0.00-10.00  sec   477 MBytes   400 Mbits/sec  0.000 ms  0/350122 (0%)  sender
[  5]   0.00-10.05  sec   466 MBytes   389 Mbits/sec  0.027 ms  7848/350117 (2.2%)  receiver

I have about 2% frame error.