Sinon pour l'IPv6 il a marché une fois, mais maintenant je n'ai que le link-local.
root@USG:/home/admin# dibbler-client run
| Dibbler - a portable DHCPv6, version 1.0.1 (CLIENT, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage: http://klub.com.pl/dhcpv6/
2018.08.09 18:49:04 Client Notice My pid (23485) is stored in /var/lib/dibbler/client.pid
2018.08.09 18:49:04 Client Notice Detected iface eth0.832/10, MAC=xx:xx:xx:xx:xx:6c.
2018.08.09 18:49:04 Client Notice Detected iface eth0.838/9, MAC=xx:xx:xx:xx:xx:6c.
2018.08.09 18:49:04 Client Notice Detected iface eth0.840/8, MAC=xx:xx:xx:xx:xx:6c.
2018.08.09 18:49:04 Client Notice Detected iface eth1.2/7, MAC=xx:xx:xx:xx:xx:6d.
2018.08.09 18:49:04 Client Notice Detected iface eth1.3/6, MAC=xx:xx:xx:xx:xx:6d.
2018.08.09 18:49:04 Client Notice Detected iface imq0/5, MAC=.
2018.08.09 18:49:04 Client Notice Detected iface eth2/4, MAC=xx:xx:xx:xx:xx:6e.
2018.08.09 18:49:04 Client Notice Detected iface eth1/3, MAC=xx:xx:xx:xx:xx:6d.
2018.08.09 18:49:04 Client Notice Detected iface eth0/2, MAC=xx:xx:xx:xx:xx:6c.
2018.08.09 18:49:04 Client Notice Detected iface lo/1, MAC=xx:xx:xx:xx:xx:00.
2018.08.09 18:49:04 Client Notice Parsing /etc/dibbler/client.conf config file...
2018.08.09 18:49:04 Client Info Interface eth0.832/10 configuration has been loaded.
2018.08.09 18:49:04 Client Info My DUID is xx:xx:xx:xx:xx:ec:da:41:c5:6c.
2018.08.09 18:49:04 Client Info Loading old address database (client-AddrMgr.xml), using built-in routines.
2018.08.09 18:49:04 Client Info DB timestamp:1533833265, now()=1533833344, db is 79 second(s) old.
2018.08.09 18:49:04 Client Info All client's xx:xx:xx:xx:xx:ec:da:41:c5:6c leases are not valid.
2018.08.09 18:49:04 Client Notice Creating control (::) socket on the lo/1 interface.
2018.08.09 18:49:04 Client Notice Creating socket (addr=fe80::feec:daff:fe41:c56c) on eth0.832/10 interface.
2018.08.09 18:49:04 Client Notice CONFIRM support compiled in.
2018.08.09 18:49:04 Client Info Creating SOLICIT message with 0 IA(s), no TA and 1 PD(s) on eth0.832/10 interface.
2018.08.09 18:49:04 Client Error AUTH: protocol 5328544 not supported yet.
2018.08.09 18:49:05 Client Info Processing msg (SOLICIT,transID=0xd66310,opts: 1 25 8 16 15 11 6)
2018.08.09 18:49:05 Client Error AUTH: protocol 5328544 not supported yet.
2018.08.09 18:49:07 Client Info Processing msg (SOLICIT,transID=0xd66310,opts: 1 25 8 16 15 11 6)
2018.08.09 18:49:07 Client Error AUTH: protocol 5328544 not supported yet.
2018.08.09 18:49:11 Client Info Processing msg (SOLICIT,transID=0xd66310,opts: 1 25 8 16 15 11 6)
2018.08.09 18:49:11 Client Error AUTH: protocol 5328544 not supported yet.
2018.08.09 18:49:19 Client Info Processing msg (SOLICIT,transID=0xd66310,opts: 1 25 8 16 15 11 6)
2018.08.09 18:49:19 Client Error AUTH: protocol 5328544 not supported yet.
J'ai bien mis le client.conf avec mon identifiant en hexa, les autres regles semblent déjà exister par défaut sans avoir besoin de les mettre dans le config.json.
Une idée?
[EDIT] les regles n'existent pas par defaut, je viens de remarquer que les regles fw ipv6 pour eth1 portent un nom different des regles par defaut. Mais mon probleme est le même, plus moyen d'obtenir une IPv6