Hello,
First of all I need say sorry that this thread is in English, but I do not speak French. Right now I'm in near Paris and I'm trying to set up Orange fiber with Juniper SRX240 firewall which I need to use instead of original Livebox. Someone on

from r/networking

sent me here, because you might help me out.

The thing is that I got some problem, that cause no route to internet - there is no connection. I need a help. I will start from showing what I have done.
Configured interfaces looks like this:
interfaces {
    ge-0/0/0 {
        description Orange;
        vlan-tagging;
        unit 0 {
            encapsulation ppp-over-ether;
            vlan-id 835;
        }
    }

...

pp0 {
    description "PPPoE interface to Orange Interenet";
    traceoptions;
    unit 0 {
        ppp-options {
            chap {
                default-chap-secret "xxx"; ## SECRET-DATA
                local-name fti/xxx;
                no-rfc2486;
                passive;
            }
            pap {
                default-password "xxx"; ## SECRET-DATA
                local-name fti/xxx;
                local-password "xxx"; ## SECRET-DATA
                passive;
            }
        }
        pppoe-options {
            underlying-interface ge-0/0/0.0;
            idle-timeout 0;
            auto-reconnect 3;
            client;
        }
        family inet {
            mtu 1492;
            negotiate-address;
        }
    }
}
}There is a static routing:
routing-options {
    static {
        route 0.0.0.0/0 {
            qualified-next-hop pp0.0
        }
    }
}But there is no record in routing table:
> show route

inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

x.x.x.x/x      *[Direct/0] 11:42:51
                    > via vlan.0
x.x.x.x/x    *[Local/0] 11:43:14
                      Local via vlan.0From the othe hand it seems that PPPoE session is up:
> show pppoe interfaces
pp0.0 Index 71
  State: Session up, Session ID: 22512,
  Service name: None,
  Session AC name: xxxx, Configured AC name: None,
  Remote MAC address: xx:xx:xx:xx:xx:xx,
  Session uptime: 00:00:36 ago,
  Auto-reconnect timeout: 3 seconds, Idle timeout: Never,
  Underlying interface: ge-0/0/0.0 Index 70

> show pppoe statistics
Active PPPoE sessions: 1
  PacketType                       Sent         Received
    PADI                            113                0
    PADO                              0              113
    PADR                            113                0
    PADS                              0              113
    PADT                              0              112
    Service name error                0                0
    AC system error                   0                0
    Generic error                     0                0
    Malformed packets                 0                0
    Unknown packets                   0                0
  Timeout
    PADI                              0
    PADO                              0
    PADR                              0
  Receive Error Counters
    PADI                              0
    PADO                              0
    PADR                              0
    PADS                              0
Afer reading almost whole Internet and after making post on reddit I figure out that PADT packets should not appear in statistics. My co-worker which speaks French called Orange to make sure that fti login and password is OK. What else might cause PADT packets?

Can you please help me? Thanks from advance!