Je viens de passer en 1.10.9 mais depuis l'IPV6 ne fonctionne pas.
sudo dibbler-client run
| Dibbler - a portable DHCPv6, version 1.0.1 (CLIENT, Linux port)
| Authors : Tomasz Mrugalski<thomson(at)klub.com.pl>,Marek Senderski<msend(at)o2.pl>
| Licence : GNU GPL v2 only. Developed at Gdansk University of Technology.
| Homepage:
http://klub.com.pl/dhcpv6/2019.05.12 07:01:46 Client Notice My pid (6954) is stored in /var/lib/dibbler/client.pid
2019.05.12 07:01:46 Client Notice Detected iface eth2.10/22, MAC=fc:ec:da:45:75:9c.
2019.05.12 07:01:46 Client Notice Detected iface eth2.20/21, MAC=fc:ec:da:45:75:9c.
2019.05.12 07:01:46 Client Notice Detected iface eth2.30/20, MAC=fc:ec:da:45:75:9c.
2019.05.12 07:01:46 Client Notice Detected iface eth2.40/19, MAC=fc:ec:da:45:75:9c.
2019.05.12 07:01:46 Client Notice Detected iface eth2.50/18, MAC=fc:ec:da:45:75:9c.
2019.05.12 07:01:46 Client Notice Detected iface eth2.90/17, MAC=fc:ec:da:45:75:9c.
2019.05.12 07:01:46 Client Notice Detected iface eth2.999/16, MAC=fc:ec:da:45:75:9c.
2019.05.12 07:01:46 Client Notice Detected iface eth1.832/15, MAC=fc:ec:da:45:75:9b.
2019.05.12 07:01:46 Client Notice Detected iface imq0/14, MAC=.
2019.05.12 07:01:46 Client Notice Detected iface loop3/13, MAC=ca:a2:50:2d:db:2a.
2019.05.12 07:01:46 Client Notice Detected iface loop2/12, MAC=b6:ee:23:3b:2d:57.
2019.05.12 07:01:46 Client Notice Detected iface loop1/11, MAC=9a:b9:70:6a:4b:c5.
2019.05.12 07:01:46 Client Notice Detected iface loop0/10, MAC=6e:1c:b5:f5:6b:b3.
2019.05.12 07:01:46 Client Notice Detected iface npi3/9, MAC=d6:5b:f4:cd:b4:dd.
2019.05.12 07:01:46 Client Notice Detected iface npi2/8, MAC=46:66:b5:37:d1:60.
2019.05.12 07:01:46 Client Notice Detected iface npi1/7, MAC=d6:9f:bd:f1:81:ce.
2019.05.12 07:01:46 Client Notice Detected iface npi0/6, MAC=86:43:2f:9a:78:5b.
2019.05.12 07:01:46 Client Notice Detected iface eth2/5, MAC=fc:ec:da:45:75:9c.
2019.05.12 07:01:46 Client Notice Detected iface eth1/4, MAC=fc:ec:da:45:75:9b.
2019.05.12 07:01:46 Client Notice Detected iface eth0/3, MAC=fc:ec:da:45:75:9a.
2019.05.12 07:01:46 Client Notice Detected iface eth3/2, MAC=fc:ec:da:45:75:99.
2019.05.12 07:01:46 Client Notice Detected iface lo/1, MAC=00:00:00:00:00:00.
2019.05.12 07:01:46 Client Notice Parsing /etc/dibbler/client.conf config file...
2019.05.12 07:01:46 Client Info Interface eth1.832/15 configuration has been loaded.
2019.05.12 07:01:46 Client Info My DUID is 00:01:00:01:24:6a:71:dd:fc:ec:da:45:75:9c.
2019.05.12 07:01:47 Client Info Loading old address database (client-AddrMgr.xml), using built-in routines.
2019.05.12 07:01:47 Client Info DB timestamp:1557644073, now()=1557644507, db is 434 second(s) old.
2019.05.12 07:01:47 Client Info All client's 00:01:00:01:24:6a:71:dd:fc:ec:da:45:75:9c leases are not valid.
2019.05.12 07:01:47 Client Notice Creating control (
socket on the lo/1 interface.
2019.05.12 07:01:47 Client Notice Creating socket (addr=fe80::feec:daff:fe45:759b) on eth1.832/15 interface.
2019.05.12 07:01:47 Client Notice CONFIRM support compiled in.
2019.05.12 07:01:47 Client Info Creating SOLICIT message with 0 IA(s), no TA and 1 PD(s) on eth1.832/15 interface.
2019.05.12 07:01:47 Client Error AUTH: protocol 13621952 not supported yet.
2019.05.12 07:01:48 Client Info Processing msg (SOLICIT,transID=0xd7e919,opts: 1 25 8 16 15 11 11 6)
2019.05.12 07:01:48 Client Error AUTH: protocol 13621952 not supported yet.
J'ai déjà eu ce message par le passé, mais impossible de corriger cette fois. Tout semble ok.
Voici mon fichier client.conf :
# Defaults for dibbler-client.
# installed at /etc/dibbler/client.conf by the maintainer scripts
log-level 7
duid-type duid-ll
downlink-prefix-ifaces "none"
script "/etc/dibbler/radvd.sh"
iface eth1.832 {
pd
option 16 hex 00:00:04:0e:00:05:73:61:67:65:6d
option 15 hex 00:2b:46:53:56:44:53:4c:5f:6c:69:76:65:62:6f:78:2e:49:6e:74:65:72:6e:65:74:2e:73:6f:66:74:61:74:68:6f:6d:65:2e:6c:69:76:65:62:6f:78:34
option 11 hex 00:00:00:00:00:00:00:00:00:00:00:xx:xx:xx
option 11 hex 00:00:00:00:00:00:00:00:00:00:00:xx:xx:xx
option dns-server
}