Merci Renaud07.
Je n'ai pas la même chose que toi mais je vois ce qui est joint.
Si je reprends les indications de levieux, il faudrait :
Magic cookie: DHCP
Option: (53) DHCP Message Type (Discover)
Option: (55) Parameter Request List
Length: 12
Parameter Request List Item: (1) Subnet Mask
Parameter Request List Item: (3) Router
Parameter Request List Item: (6) Domain Name Server
Parameter Request List Item: (15) Domain Name
Parameter Request List Item: (28) Broadcast Address
Parameter Request List Item: (51) IP Address Lease Time
Parameter Request List Item: (58) Renewal Time Value
Parameter Request List Item: (59) Rebinding Time Value
Parameter Request List Item: (90) Authentication
Parameter Request List Item: (119) Domain Search
Parameter Request List Item: (120) SIP Servers
Parameter Request List Item: (125) V-I Vendor-specific Information
Option: (60) Vendor class identifier
Option: (61) Client identifier
Option: (77) User Class Information
Option: (90) Authentication
Option: (255) End
Pourtant avec ma config, il me semble avoir tout bien renseigné :
interfaces {
ethernet eth0 {
address dhcp
description Internet
duplex auto
mac adresseMacLivebox
speed auto
vif 832 {
address dhcp
description eth0.832
dhcp-options {
client-option "send vendor-class-identifier "sagem";"
client-option "send dhcp-client-identifier 01:adresseMacLivebox;"
client-option "send user-class "\053FSVDSL_livebox.Internet.softathome.Livebox4";"
client-option "send rfc3118-auth 00:00:00:00:00:00:00:00:00:00:00:chaînelongue.....;"
client-option "request subnet-mask, routers, domain-name-servers, domain-name, broadcast-address, dhcp-lease-time, dhcp-renewal-time, dhcp-rebinding-time, rfc3118-auth; domain-search;"
default-route update
default-route-distance 210
global-option "option vendor-class-identifier code 60 = string;"
global-option "option client-identifier code 61 = string;"
global-option "option user-class code 77 = string;"
global-option "option rfc3118-auth code 90 = string;"
name-server update
}
egress-qos "0:0 1:0 2:0 3:0 4:0 5:0 6:6 7:0"
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
}
Je comprends mal les parties "global-option". J'ai repris des codes où c'était juste indiqué "string". Il faut laisser tel quel ?
Sinon je me rend compte d'une coquille qui doit terminer la ligne à cet endroit :
client-option "request subnet-mask, routers, domain-name-servers, domain-name, broadcast-address, dhcp-lease-time, dhcp-renewal-time, dhcp-rebinding-time, rfc3118-auth; domain-search;" (j'ai un ; trop tôt). Je testerai avec une virgule en rentrant.