Hello!

Thanks to click!

I want to install iperf3.1 on raspberry pi.

But "https://iperf.fr/iperf-download.php" page do not support iperf3 above 3.1 version for ARM core.
Because raspberry pi has ARM core, It do not use iperf3 of i386 or amd 64.


I tried to use lots of way to install iperf3.1 on raspbeery pi.
Using source code of above version 3.1 and making compile show error.
and using "apt install iperf3" only install iperf3 below version 3.1 on raspberry pi.


Is there another way to install iperf3.1 on rapsberry-pi?

Merci beaucoup

ByoungUk Lee

It works fine !  (Raspberry Pi 3)

hugues@Galileo:~ $ iperf3 -c 10.0.0.11 -i 1 -t 20000
Connecting to host 10.0.0.11, port 5201
[  4] local 10.0.0.23 port 38586 connected to 10.0.0.11 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec  11.3 MBytes  94.7 Mbits/sec    0   35.4 KBytes
[  4]   1.00-2.00   sec  11.2 MBytes  94.2 Mbits/sec    0   36.8 KBytes
[  4]   2.00-3.00   sec  11.2 MBytes  94.1 Mbits/sec    0   39.6 KBytes
[  4]   3.00-4.00   sec  11.2 MBytes  94.0 Mbits/sec    0   42.4 KBytes
[  4]   4.00-5.00   sec  11.2 MBytes  94.2 Mbits/sec    0   42.4 KBytes
^C[  4]   5.00-5.44   sec  4.95 MBytes  93.8 Mbits/sec    0   42.4 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-5.44   sec  61.1 MBytes  94.2 Mbits/sec    0             sender
[  4]   0.00-5.44   sec  0.00 Bytes  0.00 bits/sec                  receiver
iperf3: interrupt - the client has terminated

It works!!!

Merci beaucoup!!!

Works well too on PINE64 Arm64 ,
Able to made Gigabit tests.