Auteur Sujet: Pb de compatibilité SFP+ sur carte Intel X520-DA2  (Lu 39753 fois)

0 Membres et 1 Invité sur ce sujet

Anonyme

  • Invité
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #36 le: 14 avril 2017 à 19:56:29 »
Si tu regardes le code, il y a un "ret_val" empêchant le chargement,modifiable...Mais si tu peux pas compiler.

JulienOHAYON

  • AS29075 Officiel Ielo
  • Expert
  • *
  • Messages: 199
  • Paris (75)
    • ielo
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #37 le: 15 avril 2017 à 00:08:42 »
Pourtant dans des Intel je mets des DAC Mikrotik (donc vraiment pas d'origine) et j'ai aucun soucis (environ 50 en prod).

Après jamais pensé de tester en SFP+ en règle général c'est dans la même baie.

chiwawa_42

  • Jérôme Nicolle
  • Expert
  • *
  • Messages: 32
  • Pontoise (95)
    • Twitter @chiwawa_42
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #38 le: 15 avril 2017 à 14:17:57 »
Bon, je viens de tester avec deux SFP+ de Fiberstore, un BiDi non codé et un LR codé intel, aucun des deux ne charge, que ce soit avec le driver do'rigine de la ubuntu 16.10 ou avec la dernière version compilée à la main.

La carte que j'ai installée cette fois est la 82598EB, je vais reessayer avec une 82599 si j'en retrouve dans mon stock.

Est ce qu'on a une idée de la version à laquelle Intel a ajouté ce coup de pute ? Genre pour downgrader et pouvoir enfin utiliser ce matos ?

EDIT : test avec la vraie X520-DA2 qu'il me restait, driver ixgbe 5.0.4

root@sixties:~# dmesg | grep ixgbe
[    2.167880] ixgbe: loading out-of-tree module taints kernel.
[    2.168032] ixgbe: module verification failed: signature and/or required key missing - tainting kernel
[    2.189438] ixgbe: 0000:04:00.0: ixgbe_check_options: FCoE Offload feature enabled
[    2.189440] ixgbe: allow_unsupported_sfp Enabled
[    2.200200] ixgbe 0000:04:00.0 0000:04:00.0 (uninitialized): WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.
[    2.347198] ixgbe 0000:04:00.0: PCI Express bandwidth of 32GT/s available
[    2.347200] ixgbe 0000:04:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
[    2.347281] ixgbe 0000:04:00.0 eth0: MAC: 2, PHY: 18, SFP+: 5, PBA No: E66560-006
[    2.347282] ixgbe 0000:04:00.0: 90:e2:ba:52:08:d4
[    2.347284] ixgbe 0000:04:00.0 eth0: Enabled Features: RxQ: 32 TxQ: 32 FdirHash
[    2.347329] ixgbe 0000:04:00.0 eth0: Intel(R) 10 Gigabit Network Connection
[    2.367895] ixgbe: 0000:04:00.1: ixgbe_check_options: FCoE Offload feature enabled
[    2.566629] ixgbe 0000:04:00.1: PCI Express bandwidth of 32GT/s available
[    2.566631] ixgbe 0000:04:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
[    2.566712] ixgbe 0000:04:00.1 eth1: MAC: 2, PHY: 19, SFP+: 6, PBA No: E66560-006
[    2.566713] ixgbe 0000:04:00.1: 90:e2:ba:52:08:d5
[    2.566715] ixgbe 0000:04:00.1 eth1: Enabled Features: RxQ: 32 TxQ: 32 FdirHash
[    2.566756] ixgbe 0000:04:00.1 eth1: Intel(R) 10 Gigabit Network Connection
[    2.567716] ixgbe 0000:04:00.0 ens5f0: renamed from eth0
[    2.585625] ixgbe 0000:04:00.1 ens5f1: renamed from eth1
[    5.594560] ixgbe 0000:04:00.0: registered PHC device on ens5f0
[    5.710109] ixgbe 0000:04:00.0 ens5f0: WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.
[    5.765874] ixgbe 0000:04:00.0 ens5f0: detected SFP+: 5
[    5.844348] ixgbe 0000:04:00.1: registered PHC device on ens5f1
[    6.013867] ixgbe 0000:04:00.1 ens5f1: detected SFP+: 6
[    7.637727] ixgbe 0000:04:00.0 ens5f0: NIC Link is Up 10 Gbps, Flow Control: RX/TX

donc le problème vient du 82598EB avec les nouveaux drivers, pas du 82599ES ?

04:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
04:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)



acontios

  • AS34019 - Hivane Network
  • Professionnel des télécoms
  • *
  • Messages: 191
  • Paris (75)
    • Hivane
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #39 le: 15 avril 2017 à 14:23:28 »
Bon, je viens de tester avec deux SFP+ de Fiberstore, un BiDi non codé et un LR codé intel, aucun des deux ne charge, que ce soit avec le driver do'rigine de la ubuntu 16.10 ou avec la dernière version compilée à la main.

La carte que j'ai installée cette fois est la 82598EB, je vais reessayer avec une 82599 si j'en retrouve dans mon stock.
Ah oui, même un codé Intel ? Quel produit de FS ?

Parce que je leur ai envoyé un mail leur demandant si leur produit fonctionnera sur une 82598, et ils m'ont dit:
After confirming with the engineer,  #36431 <http://www.fs.com/products/36431.html>(kindly check below quotation and ETA) can well work on your Intel 82598EB PCIe NIC with Intel code.
The reason why your Finisar have issues using on it is caused by incompatible.

We can help to write Intel code to assure compatibility.
BTW, all our optics now can enjoy *lifetime warranty*. If you need, just be rest assured to shop with us, there is no risk for you.

Intel E10GSFPSR Compatible 1000BASE-SX and 10GBASE-SR SFP+ 850nm 300m DOM Transceiver <http://www.fs.com/products/36431.html>    #36431    same day shipping

Citer
Est ce qu'on a une idée de la version à laquelle Intel a ajouté ce coup de pute ? Genre pour downgrader et pouvoir enfin utiliser ce matos ?

Version de quoi, driver ? A mon avis il s'agit surtout d'une limitation hardware (donc peut être que si on peut flasher le firmware de la carte réseau)...

chiwawa_42

  • Jérôme Nicolle
  • Expert
  • *
  • Messages: 32
  • Pontoise (95)
    • Twitter @chiwawa_42
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #40 le: 15 avril 2017 à 14:29:58 »
Les optiques :

root@sixties:~# ethtool -m ens5f0
Identifier                                : 0x03 (SFP)
Extended identifier                       : 0x04 (GBIC/SFP defined by 2-wire interface ID)
Connector                                 : 0x07 (LC)
Transceiver codes                         : 0x20 0x00 0x00 0x00 0x20 0x00 0x01 0x00
Transceiver type                          : 10G Ethernet: 10G Base-LR
Transceiver type                          : FC: intermediate distance (I)
Transceiver type                          : FC: Single Mode (SM)
Encoding                                  : 0x06 (64B/66B)
BR, Nominal                               : 10300MBd
Rate identifier                           : 0x00 (unspecified)
Length (SMF,km)                           : 10km
Length (SMF)                              : 10000m
Length (50um)                             : 0m
Length (62.5um)                           : 0m
Length (Copper)                           : 0m
Length (OM3)                              : 0m
Laser wavelength                          : 1330nm
Vendor name                               : FiberStore
Vendor OUI                                : 00:00:00
Vendor PN                                 : SFP-10G-BX
Vendor rev                                :
Option values                             : 0x00 0x1a
Option                                    : RX_LOS implemented
Option                                    : TX_FAULT implemented
Option                                    : TX_DISABLE implemented
BR margin, max                            : 0%
BR margin, min                            : 0%
Vendor SN                                 : F172CO00421
Date code                                 : 170205
Optical diagnostics support               : Yes
Laser bias current                        : 48.960 mA
Laser output power                        : 1.5516 mW / 1.91 dBm
Receiver signal average optical power     : 0.9209 mW / -0.36 dBm
Module temperature                        : 37.71 degrees C / 99.88 degrees F
Module voltage                            : 3.3137 V
Alarm/warning flags implemented           : Yes
Laser bias current high alarm             : Off
Laser bias current low alarm              : Off
Laser bias current high warning           : Off
Laser bias current low warning            : Off
Laser output power high alarm             : Off
Laser output power low alarm              : Off
Laser output power high warning           : Off
Laser output power low warning            : Off
Module temperature high alarm             : Off
Module temperature low alarm              : Off
Module temperature high warning           : Off
Module temperature low warning            : Off
Module voltage high alarm                 : Off
Module voltage low alarm                  : Off
Module voltage high warning               : Off
Module voltage low warning                : Off
Laser rx power high alarm                 : Off
Laser rx power low alarm                  : Off
Laser rx power high warning               : Off
Laser rx power low warning                : Off
Laser bias current high alarm threshold   : 100.000 mA
Laser bias current low alarm threshold    : 5.000 mA
Laser bias current high warning threshold : 90.000 mA
Laser bias current low warning threshold  : 5.000 mA
Laser output power high alarm threshold   : 2.2387 mW / 3.50 dBm
Laser output power low alarm threshold    : 0.0955 mW / -10.20 dBm
Laser output power high warning threshold : 1.7783 mW / 2.50 dBm
Laser output power low warning threshold  : 0.1514 mW / -8.20 dBm
Module temperature high alarm threshold   : 95.00 degrees C / 203.00 degrees F
Module temperature low alarm threshold    : -50.00 degrees C / -58.00 degrees F
Module temperature high warning threshold : 85.00 degrees C / 185.00 degrees F
Module temperature low warning threshold  : -40.00 degrees C / -40.00 degrees F
Module voltage high alarm threshold       : 3.6000 V
Module voltage low alarm threshold        : 3.0000 V
Module voltage high warning threshold     : 3.5000 V
Module voltage low warning threshold      : 3.1000 V
Laser rx power high alarm threshold       : 2.2387 mW / 3.50 dBm
Laser rx power low alarm threshold        : 0.0229 mW / -16.40 dBm
Laser rx power high warning threshold     : 1.7783 mW / 2.50 dBm
Laser rx power low warning threshold      : 0.0363 mW / -14.40 dBm



root@sixties:~# ethtool -m ens5f1
Identifier                                : 0x03 (SFP)
Extended identifier                       : 0x04 (GBIC/SFP defined by 2-wire interface ID)
Connector                                 : 0x07 (LC)
Transceiver codes                         : 0x20 0x00 0x00 0x02 0x00 0x00 0x00 0x00
Transceiver type                          : 10G Ethernet: 10G Base-LR
Transceiver type                          : Ethernet: 1000BASE-LX
Encoding                                  : 0x06 (64B/66B)
BR, Nominal                               : 10300MBd
Rate identifier                           : 0x02 (8/4/2G Rx Rate_Select only)
Length (SMF,km)                           : 10km
Length (SMF)                              : 10000m
Length (50um)                             : 0m
Length (62.5um)                           : 0m
Length (Copper)                           : 0m
Length (OM3)                              : 0m
Laser wavelength                          : 1310nm
Vendor name                               : FiberStore
Vendor OUI                                : 00:1b:21
Vendor PN                                 : SFP-10GLR-31
Vendor rev                                : A
Option values                             : 0x00 0x3a
Option                                    : RX_LOS implemented
Option                                    : TX_FAULT implemented
Option                                    : TX_DISABLE implemented
Option                                    : RATE_SELECT implemented
BR margin, max                            : 0%
BR margin, min                            : 0%
Vendor SN                                 : F172IN01505
Date code                                 : 170223
Optical diagnostics support               : Yes
Laser bias current                        : 37.530 mA
Laser output power                        : 0.9817 mW / -0.08 dBm
Receiver signal average optical power     : 0.0001 mW / -40.00 dBm
Module temperature                        : 35.44 degrees C / 95.79 degrees F
Module voltage                            : 3.3091 V
Alarm/warning flags implemented           : Yes
Laser bias current high alarm             : Off
Laser bias current low alarm              : Off
Laser bias current high warning           : Off
Laser bias current low warning            : Off
Laser output power high alarm             : Off
Laser output power low alarm              : Off
Laser output power high warning           : Off
Laser output power low warning            : Off
Module temperature high alarm             : Off
Module temperature low alarm              : Off
Module temperature high warning           : Off
Module temperature low warning            : Off
Module voltage high alarm                 : Off
Module voltage low alarm                  : Off
Module voltage high warning               : Off
Module voltage low warning                : Off
Laser rx power high alarm                 : Off
Laser rx power low alarm                  : On
Laser rx power high warning               : Off
Laser rx power low warning                : On
Laser bias current high alarm threshold   : 110.000 mA
Laser bias current low alarm threshold    : 1.000 mA
Laser bias current high warning threshold : 100.000 mA
Laser bias current low warning threshold  : 1.000 mA
Laser output power high alarm threshold   : 2.2387 mW / 3.50 dBm
Laser output power low alarm threshold    : 0.0955 mW / -10.20 dBm
Laser output power high warning threshold : 1.7783 mW / 2.50 dBm
Laser output power low warning threshold  : 0.1514 mW / -8.20 dBm
Module temperature high alarm threshold   : 100.00 degrees C / 212.00 degrees F
Module temperature low alarm threshold    : -50.00 degrees C / -58.00 degrees F
Module temperature high warning threshold : 85.00 degrees C / 185.00 degrees F
Module temperature low warning threshold  : -40.00 degrees C / -40.00 degrees F
Module voltage high alarm threshold       : 3.6300 V
Module voltage low alarm threshold        : 2.9700 V
Module voltage high warning threshold     : 3.4650 V
Module voltage low warning threshold      : 3.1350 V
Laser rx power high alarm threshold       : 2.2387 mW / 3.50 dBm
Laser rx power low alarm threshold        : 0.0229 mW / -16.40 dBm
Laser rx power high warning threshold     : 1.7783 mW / 2.50 dBm
Laser rx power low warning threshold      : 0.0363 mW / -14.40 dBm



vivien

  • Administrateur
  • *
  • Messages: 46 994
    • Twitter LaFibre.info
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #41 le: 15 avril 2017 à 14:32:42 »
Oui, il est possible de flasher le firmware de la carte, il y a régulièrement des nouvelles versions.

acontios

  • AS34019 - Hivane Network
  • Professionnel des télécoms
  • *
  • Messages: 191
  • Paris (75)
    • Hivane
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #42 le: 15 avril 2017 à 14:35:32 »
Citation de: NicolBolas
Vendor name                             : FiberStore
Vendor OUI                                : 00:1b:21
Vendor PN                                 : SFP-10GLR-31

Ca ne dit pas si c'est codé Intel :-)

Oui, il est possible de flasher le firmware de la carte, il y a régulièrement des nouvelles versions.

Tu sais où on trouve les firmwares de la carte ?

chiwawa_42

  • Jérôme Nicolle
  • Expert
  • *
  • Messages: 32
  • Pontoise (95)
    • Twitter @chiwawa_42
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #43 le: 15 avril 2017 à 14:42:18 »
En effet, mais oui, ils sont codés Intel, je les est commandés spécialement pour.

Bon ce qui m'emmerde, c'est que les 82598EB sont pour ainsi dire inutilisable en l'état. J'en ai juste une vingtaine sur le dos…

acontios > je lance des commandes d'optiques compatibles ou on tente le coup du firmware en croisant les doigts, dès que Vivien a retrouvé le lien ? (j'ai rien vu chez Intel à ce sujet).

vivien

  • Administrateur
  • *
  • Messages: 46 994
    • Twitter LaFibre.info
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #44 le: 15 avril 2017 à 14:47:26 »
C'est une INTEL Network 82599 Dual Port 10G ?

J'ai trouvé le firmware sur le site Dell : http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=27FD1

Si tu as un PC Dell, la mise à jour de la carte se fait simplement en cliquant sur F10 lors du boot, pour démarrer le "Lifecycle Controller" puis en sélectionnant une connexion Internet sur la carte Ethernet, puis une connexion sur le serveur ftp://ftp.dell.com/ (le serveur FTP est vraiment lent et je ne comprend pas que des serveurs achetés en 2017 utilisent toujours ce protocole des années 1980 pour aller hercher de nouvelles version du firmware. https me semble plus pertinent)

acontios

  • AS34019 - Hivane Network
  • Professionnel des télécoms
  • *
  • Messages: 191
  • Paris (75)
    • Hivane
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #45 le: 15 avril 2017 à 14:54:10 »
J'en ai cinq sur les bras (des dual), des 82598EB.
Mais je sens que je vais me rabbatre sur mes chelsio, car ca me reloute de ne pas pouvoir utiliser ces optiques SR...




La version "low profile" vient de filers Isilon, et la "full length" d'un Netapp :)

acontios

  • AS34019 - Hivane Network
  • Professionnel des télécoms
  • *
  • Messages: 191
  • Paris (75)
    • Hivane
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #46 le: 15 avril 2017 à 14:55:18 »
C'est une INTEL Network 82599 Dual Port 10G ?

Non: 89598EB Dual port 10G, malheureusement :)

chiwawa_42

  • Jérôme Nicolle
  • Expert
  • *
  • Messages: 32
  • Pontoise (95)
    • Twitter @chiwawa_42
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #47 le: 15 avril 2017 à 15:07:33 »
D'après Intel le 82598EB ne supporte que les DAC, pas les optiques.

Reste à voir si c'est contournable ou si je peux utiliser ces cartes pour de la déco murale…