[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-23-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #75-Ubuntu SMP Fri Mar 18 18:16:06 UTC 2011 (Ubuntu 2.6.31-23.75-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-23-generic root=UUID=c10bffce-eba4-407c-8e65-a94c99f24c30 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ee0000 (usable) [ 0.000000] BIOS-e820: 0000000077ee0000 - 0000000077ee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077ee3000 - 0000000077ef0000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077ef0000 - 0000000077f00000 (reserved) [ 0.000000] BIOS-e820: 0000000078000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x77ee0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0060000000 mask FFF0000000 write-back [ 0.000000] 3 base 0070000000 mask FFF8000000 write-back [ 0.000000] 4 base 0077F00000 mask FFFFF00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000077ee0000 (usable) [ 0.000000] modified: 0000000077ee0000 - 0000000077ee3000 (ACPI NVS) [ 0.000000] modified: 0000000077ee3000 - 0000000077ef0000 (ACPI data) [ 0.000000] modified: 0000000077ef0000 - 0000000077f00000 (reserved) [ 0.000000] modified: 0000000078000000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000077ee0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0077e00000 page 2M [ 0.000000] 0077e00000 - 0077ee0000 page 4k [ 0.000000] kernel direct mapping tables up to 77ee0000 @ 8000-c000 [ 0.000000] RAMDISK: 3786d000 - 37fef9ed [ 0.000000] ACPI: RSDP 00000000000f8450 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 0000000077ee3040 00040 (v01 DELL bMk 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0000000077ee3100 00074 (v01 DELL bMk 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0000000077ee31c0 0592F (v01 DELL BMK 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 0000000077ee0000 00040 [ 0.000000] ACPI: BOOT 0000000077ee8b40 00028 (v01 DELL bMk 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 0000000077ee8c80 000F4 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 0000000077ee8dc0 00038 (v01 DELL bMk 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 0000000077ee8e40 0003C (v01 DELL bMk 42302E31 AWRD 00000000) [ 0.000000] ACPI: SLIC 0000000077ee8ec0 00176 (v01 DELL bMk 42302E31 AWRD 0100000E) [ 0.000000] ACPI: APIC 0000000077ee8bc0 00072 (v01 DELL bMk 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000077ee0000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000077ee0000 [ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff] [ 0.000000] bootmap [000000000000f000 - 000000000001dfdf] pages f [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0077ee0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019ebe8c] TEXT DATA BSS ==> [0001000000 - 00019ebe8c] [ 0.000000] #3 [003786d000 - 0037fef9ed] RAMDISK ==> [003786d000 - 0037fef9ed] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00019ec000 - 00019ec26c] BRK ==> [00019ec000 - 00019ec26c] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000f3d30] f3d30 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00077ee0 [ 0.000000] On node 0 totalpages: 491130 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 101 pages reserved [ 0.000000] DMA zone: 3837 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6661 pages used for memmap [ 0.000000] DMA32 zone: 480475 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff8800019fd000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 484312 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-23-generic root=UUID=c10bffce-eba4-407c-8e65-a94c99f24c30 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ edee000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1917584k/1964928k available (5334k kernel code, 408k absent, 46936k reserved, 3017k data, 668k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2004.451 MHz processor. [ 0.000013] spurious 8259A interrupt: IRQ7. [ 0.003391] Console: colour VGA+ 80x25 [ 0.003393] console [tty0] enabled [ 0.010000] allocated 19660800 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4008.90 BogoMIPS (lpj=20044510) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys devices [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] tseg: 0077f00000 [ 0.010000] mce: CPU supports 5 MCE banks [ 0.010000] using C1E aware idle routine [ 0.010000] Performance Counters: AMD PMU driver. [ 0.010000] ... version: 0 [ 0.010000] ... bit width: 48 [ 0.010000] ... generic counters: 4 [ 0.010000] ... value mask: 0000ffffffffffff [ 0.010000] ... max period: 00007fffffffffff [ 0.010000] ... fixed-purpose counters: 0 [ 0.010000] ... counter mask: 000000000000000f [ 0.010000] SMP alternatives: switching to UP code [ 0.010026] ACPI: Core revision 20090521 [ 0.018926] Setting APIC routing to flat [ 0.020515] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.040000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.040000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.040000] ..... (found apic 0 pin 0) ... [ 0.060000] ....... failed. [ 0.060000] ...trying to set up timer as Virtual Wire IRQ... [ 0.060000] ..... failed. [ 0.060000] ...trying to set up timer as ExtINT IRQ... [ 0.164252] ..... works. [ 0.164253] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02 [ 0.170000] Brought up 1 CPUs [ 0.170000] Total of 1 processors activated (4008.90 BogoMIPS). [ 0.170000] CPU0 attaching NULL sched-domain. [ 0.170000] Booting paravirtualized kernel on bare hardware [ 0.170000] regulator: core version 0.5 [ 0.170000] Time: 19:49:08 Date: 07/21/19 [ 0.170000] NET: Registered protocol family 16 [ 0.170000] node 0 link 0: io port [8000, ffff] [ 0.170000] TOM: 0000000080000000 aka 2048M [ 0.170000] node 0 link 0: mmio [a0000, bffff] [ 0.170000] node 0 link 0: mmio [80000000, efffffff] [ 0.170000] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.170000] node 0 link 0: mmio [f0000000, f04fffff] [ 0.170000] bus: [00,04] on node 0 link 0 [ 0.170000] bus: 00 index 0 io port: [0, ffff] [ 0.170000] bus: 00 index 1 mmio: [a0000, bffff] [ 0.170000] bus: 00 index 2 mmio: [80000000, f3ffffff] [ 0.170000] bus: 00 index 3 mmio: [f4000000, fcffffffff] [ 0.170000] ACPI: bus type pci registered [ 0.170000] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.170000] PCI: MCFG area at f0000000 reserved in E820 [ 0.170000] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.170000] PCI: Using configuration type 1 for base access [ 0.170000] bio: create slab at 0 [ 0.170000] ACPI: EC: Look up EC in DSDT [ 0.171223] ACPI: Interpreter enabled [ 0.171227] ACPI: (supports S0 S1 S3 S4 S5) [ 0.171257] ACPI: Using IOAPIC for interrupt routing [ 0.179483] ACPI: No dock devices found. [ 0.180558] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.180805] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180808] pci 0000:00:02.0: PME# disabled [ 0.180837] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180840] pci 0000:00:03.0: PME# disabled [ 0.180869] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.180871] pci 0000:00:04.0: PME# disabled [ 0.180890] pci 0000:00:05.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.180895] pci 0000:00:05.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.180900] pci 0000:00:05.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] [ 0.180906] pci 0000:00:05.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.181141] pci 0000:00:0a.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.181147] pci 0000:00:0a.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.181170] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.181176] pci 0000:00:0a.1: PME# disabled [ 0.181239] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.181266] pci 0000:00:0b.0: supports D1 D2 [ 0.181268] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.181272] pci 0000:00:0b.0: PME# disabled [ 0.181297] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.181326] pci 0000:00:0b.1: supports D1 D2 [ 0.181328] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.181332] pci 0000:00:0b.1: PME# disabled [ 0.181368] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.181373] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.181378] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.181383] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.181388] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f] [ 0.181393] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.181437] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7] [ 0.181442] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3] [ 0.181447] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967] [ 0.181452] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63] [ 0.181457] pci 0000:00:0f.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.181462] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.181541] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.181573] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.181577] pci 0000:00:10.1: PME# disabled [ 0.181701] pci 0000:00:02.0: bridge io port: [0xa000-0xafff] [ 0.181704] pci 0000:00:02.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.181708] pci 0000:00:02.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] [ 0.181747] pci 0000:00:03.0: bridge io port: [0x8000-0x8fff] [ 0.181751] pci 0000:00:03.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.181754] pci 0000:00:03.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.181794] pci 0000:00:04.0: bridge io port: [0xb000-0xbfff] [ 0.181797] pci 0000:00:04.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.181801] pci 0000:00:04.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.181834] pci 0000:04:07.0: reg 10 32bit mmio: [0xfdbfe000-0xfdbfffff] [ 0.181868] pci 0000:04:07.0: supports D1 D2 [ 0.181870] pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.181874] pci 0000:04:07.0: PME# disabled [ 0.181903] pci 0000:00:10.0: transparent bridge [ 0.181907] pci 0000:00:10.0: bridge io port: [0x9000-0x9fff] [ 0.181910] pci 0000:00:10.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.181914] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfda00000-0xfdafffff] [ 0.181928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.182190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.261386] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.261554] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.261722] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.261891] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) [ 0.262057] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.262224] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.262393] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15) [ 0.262559] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.262727] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 0.262894] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.263062] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.263229] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.263398] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.263566] ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 9 10 11 14 15) [ 0.263743] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.263916] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) [ 0.264085] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 *15) [ 0.264251] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.264420] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.264594] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.264817] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.265028] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.265238] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.265448] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.265658] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.265868] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.266079] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.266290] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.266500] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.266711] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.266923] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.267134] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.267345] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0 [ 0.267555] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.267766] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.267977] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.268194] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.268407] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.268618] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.268832] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.269047] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.269252] SCSI subsystem initialized [ 0.269331] libata version 3.00 loaded. [ 0.269406] usbcore: registered new interface driver usbfs [ 0.269421] usbcore: registered new interface driver hub [ 0.269444] usbcore: registered new device driver usb [ 0.269571] ACPI: WMI: Mapper loaded [ 0.269573] PCI: Using ACPI for IRQ routing [ 0.269740] Bluetooth: Core ver 2.15 [ 0.269767] NET: Registered protocol family 31 [ 0.269769] Bluetooth: HCI device and connection manager initialized [ 0.269772] Bluetooth: HCI socket layer initialized [ 0.269775] NetLabel: Initializing [ 0.269776] NetLabel: domain hash size = 128 [ 0.269778] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.269793] NetLabel: unlabeled traffic allowed by default [ 0.269940] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.269945] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.281582] pnp: PnP ACPI init [ 0.281608] ACPI: bus type pnp registered [ 0.286116] pnp: PnP ACPI: found 9 devices [ 0.286118] ACPI: ACPI bus type pnp unregistered [ 0.286132] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.286137] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.286140] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.286144] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.286147] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.286150] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.286153] system 00:01: ioport range 0x2000-0x207f has been reserved [ 0.286156] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 0.286160] system 00:01: iomem range 0xfec80000-0xfecbffff has been reserved [ 0.286163] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 0.286166] system 00:01: iomem range 0x78000000-0x7fffffff has been reserved [ 0.286172] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.286175] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.286184] system 00:07: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.286189] system 00:08: iomem range 0xcec00-0xcffff has been reserved [ 0.286193] system 00:08: iomem range 0xf0000-0xf7fff could not be reserved [ 0.286196] system 00:08: iomem range 0xf8000-0xfbfff could not be reserved [ 0.286199] system 00:08: iomem range 0xfc000-0xfffff could not be reserved [ 0.286202] system 00:08: iomem range 0x77ee0000-0x77efffff could not be reserved [ 0.286205] system 00:08: iomem range 0xffff0000-0xffffffff has been reserved [ 0.286208] system 00:08: iomem range 0x0-0x9ffff could not be reserved [ 0.286212] system 00:08: iomem range 0x100000-0x77edffff could not be reserved [ 0.286215] system 00:08: iomem range 0x77f00000-0x7fefffff could not be reserved [ 0.286218] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.286221] system 00:08: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.286225] system 00:08: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.286228] system 00:08: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.286231] system 00:08: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.286234] system 00:08: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.290023] Switched to high resolution mode on CPU 0 [ 0.290957] AppArmor: AppArmor Filesystem Enabled [ 0.290993] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.290996] pci 0000:00:02.0: IO window: 0xa000-0xafff [ 0.290999] pci 0000:00:02.0: MEM window: 0xfd800000-0xfd8fffff [ 0.291003] pci 0000:00:02.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff [ 0.291007] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 [ 0.291010] pci 0000:00:03.0: IO window: 0x8000-0x8fff [ 0.291014] pci 0000:00:03.0: MEM window: 0xfde00000-0xfdefffff [ 0.291017] pci 0000:00:03.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.291021] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03 [ 0.291024] pci 0000:00:04.0: IO window: 0xb000-0xbfff [ 0.291027] pci 0000:00:04.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.291031] pci 0000:00:04.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.291035] pci 0000:00:10.0: PCI bridge, secondary bus 0000:04 [ 0.291038] pci 0000:00:10.0: IO window: 0x9000-0x9fff [ 0.291042] pci 0000:00:10.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.291046] pci 0000:00:10.0: PREFETCH window: 0xfda00000-0xfdafffff [ 0.291055] pci 0000:00:02.0: setting latency timer to 64 [ 0.291060] pci 0000:00:03.0: setting latency timer to 64 [ 0.291065] pci 0000:00:04.0: setting latency timer to 64 [ 0.291069] pci 0000:00:10.0: setting latency timer to 64 [ 0.291074] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.291077] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.291080] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.291083] pci_bus 0000:01: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.291086] pci_bus 0000:01: resource 2 pref mem [0xfd700000-0xfd7fffff] [ 0.291089] pci_bus 0000:02: resource 0 io: [0x8000-0x8fff] [ 0.291092] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.291095] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.291098] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] [ 0.291101] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.291104] pci_bus 0000:03: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.291107] pci_bus 0000:04: resource 0 io: [0x9000-0x9fff] [ 0.291109] pci_bus 0000:04: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.291112] pci_bus 0000:04: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.291115] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.291118] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.291158] NET: Registered protocol family 2 [ 0.291297] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.292231] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.294026] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.294497] TCP: Hash tables configured (established 262144 bind 65536) [ 0.294500] TCP reno registered [ 0.294596] NET: Registered protocol family 1 [ 0.294666] Trying to unpack rootfs image as initramfs... [ 0.488454] Freeing initrd memory: 7690k freed [ 0.492084] Simple Boot Flag at 0x3a set to 0x80 [ 0.492223] Scanning for low memory corruption every 60 seconds [ 0.492365] audit: initializing netlink socket (disabled) [ 0.492381] type=2000 audit(1563738547.490:1): initialized [ 0.501812] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.503305] VFS: Disk quotas dquot_6.5.2 [ 0.503362] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.504021] fuse init (API version 7.12) [ 0.504108] msgmni has been set to 3760 [ 0.504313] alg: No test for stdrng (krng) [ 0.504325] io scheduler noop registered [ 0.504328] io scheduler anticipatory registered [ 0.504330] io scheduler deadline registered [ 0.504377] io scheduler cfq registered (default) [ 0.504423] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.504444] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.504468] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.504474] pci 0000:00:05.0: Boot video device [ 0.520292] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.520299] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.520351] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.520358] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.520411] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.520417] pci 0000:00:10.0: Enabling HT MSI Mapping [ 0.520473] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.520481] pci 0000:00:10.1: Enabling HT MSI Mapping [ 0.520614] alloc irq_desc for 24 on node 0 [ 0.520617] alloc kstat_irqs on node 0 [ 0.520626] pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.520632] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.520726] alloc irq_desc for 25 on node 0 [ 0.520728] alloc kstat_irqs on node 0 [ 0.520734] pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X [ 0.520738] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 0.520825] alloc irq_desc for 26 on node 0 [ 0.520827] alloc kstat_irqs on node 0 [ 0.520832] pcieport-driver 0000:00:04.0: irq 26 for MSI/MSI-X [ 0.520837] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 0.520900] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.520927] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.521059] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.521063] ACPI: Power Button [PWRF] [ 0.521121] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.521124] ACPI: Power Button [PWRB] [ 0.521675] processor LNXCPU:00: registered as cooling_device0 [ 0.526354] Linux agpgart interface v0.103 [ 0.526365] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.527483] brd: module loaded [ 0.527924] loop: module loaded [ 0.528009] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.528334] sata_nv 0000:00:0e.0: version 3.5 [ 0.528753] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.528759] alloc irq_desc for 23 on node 0 [ 0.528761] alloc kstat_irqs on node 0 [ 0.528773] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.528776] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 0.528829] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 0.528959] scsi0 : sata_nv [ 0.529057] scsi1 : sata_nv [ 0.529234] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23 [ 0.529237] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23 [ 0.529671] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.529675] alloc irq_desc for 22 on node 0 [ 0.529676] alloc kstat_irqs on node 0 [ 0.529685] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.529688] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 0.529730] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 0.529869] scsi2 : sata_nv [ 0.529930] scsi3 : sata_nv [ 0.530142] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22 [ 0.530145] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22 [ 0.530855] Fixed MDIO Bus: probed [ 0.530888] PPP generic driver version 2.4.2 [ 0.531007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.531430] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.531435] alloc irq_desc for 21 on node 0 [ 0.531437] alloc kstat_irqs on node 0 [ 0.531448] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 0.531465] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 0.531468] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.531500] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 0.531533] ehci_hcd 0000:00:0b.1: debug port 1 [ 0.531537] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 0.531562] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000 [ 0.550015] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.550095] usb usb1: configuration #1 chosen from 1 choice [ 0.550128] hub 1-0:1.0: USB hub found [ 0.550136] hub 1-0:1.0: 8 ports detected [ 0.550213] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.550606] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 0.550609] alloc irq_desc for 20 on node 0 [ 0.550611] alloc kstat_irqs on node 0 [ 0.550620] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 0.550631] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.550634] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.550665] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.550695] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000 [ 0.612068] usb usb2: configuration #1 chosen from 1 choice [ 0.612095] hub 2-0:1.0: USB hub found [ 0.612107] hub 2-0:1.0: 8 ports detected [ 0.612167] uhci_hcd: USB Universal Host Controller Interface driver [ 0.612284] PNP: No PS/2 controller found. Probing ports directly. [ 0.614710] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.614715] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.614774] mice: PS/2 mouse device common for all mice [ 0.614869] rtc_cmos 00:04: RTC can wake from S4 [ 0.614909] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.614945] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.615066] device-mapper: uevent: version 1.0.3 [ 0.615155] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.615233] device-mapper: multipath: version 1.1.0 loaded [ 0.615236] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.615358] cpuidle: using governor ladder [ 0.615360] cpuidle: using governor menu [ 0.615791] TCP cubic registered [ 0.615918] NET: Registered protocol family 10 [ 0.616356] lo: Disabled Privacy Extensions [ 0.616639] NET: Registered protocol family 17 [ 0.616659] Bluetooth: L2CAP ver 2.13 [ 0.616661] Bluetooth: L2CAP socket layer initialized [ 0.616664] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.616666] Bluetooth: SCO socket layer initialized [ 0.616699] Bluetooth: RFCOMM TTY layer initialized [ 0.616702] Bluetooth: RFCOMM socket layer initialized [ 0.616704] Bluetooth: RFCOMM ver 1.11 [ 0.616720] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) [ 0.616771] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 [ 0.616773] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 0.616776] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 0.616885] PM: Resume from disk failed. [ 0.616899] registered taskstats version 1 [ 0.617042] Magic number: 11:388:850 [ 0.617134] rtc_cmos 00:04: setting system clock to 2019-07-21 19:49:09 UTC (1563738549) [ 0.617138] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.617140] EDD information not available. [ 0.870550] ata3: SATA link down (SStatus 0 SControl 300) [ 0.870573] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.010040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.070253] ata1.00: ATA-7: ST3160812AS, 3.ADJ, max UDMA/133 [ 1.070256] ata1.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.090029] usb 1-1: configuration #1 chosen from 1 choice [ 1.161890] ata1.00: configured for UDMA/133 [ 1.161988] scsi 0:0:0:0: Direct-Access ATA ST3160812AS 3.AD PQ: 0 ANSI: 5 [ 1.162104] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.162144] sd 0:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB) [ 1.162190] sd 0:0:0:0: [sda] Write Protect is off [ 1.162193] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.162217] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.162335] sda: sda1 sda2 sda3 sda4 < sda5 > [ 1.229694] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.550017] usb 2-3: new low speed USB device using ohci_hcd and address 2 [ 1.650043] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.670185] ata2.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H493A, D200, max UDMA/33 [ 1.710197] ata2.00: configured for UDMA/33 [ 1.711053] scsi 1:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H493A D200 PQ: 0 ANSI: 5 [ 1.714149] sr0: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray [ 1.714152] Uniform CD-ROM driver Revision: 3.20 [ 1.714230] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.714275] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.781084] usb 2-3: configuration #1 chosen from 1 choice [ 2.050569] ata4: SATA link down (SStatus 0 SControl 300) [ 2.050598] Freeing unused kernel memory: 668k freed [ 2.050908] Write protecting the kernel read-only data: 7600k [ 2.126390] usb 2-4: new low speed USB device using ohci_hcd and address 3 [ 2.318729] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 2.318737] alloc irq_desc for 19 on node 0 [ 2.318740] alloc kstat_irqs on node 0 [ 2.318753] b44 0000:04:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 2.318762] b44 0000:04:07.0: setting latency timer to 64 [ 2.353561] usbcore: registered new interface driver hiddev [ 2.359229] Initializing USB Mass Storage driver... [ 2.359335] scsi4 : SCSI emulation for USB Mass Storage devices [ 2.359607] usbcore: registered new interface driver usb-storage [ 2.359610] USB Mass Storage support registered. [ 2.359788] usb-storage: device found at 2 [ 2.359790] usb-storage: waiting for device to settle before scanning [ 2.364815] input: Dell Dell USB Wired Entry Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input3 [ 2.364883] generic-usb 0003:413C:2111.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Wired Entry Keyboard] on usb-0000:00:0b.0-3/input0 [ 2.377150] input: Dell Dell USB Wired Entry Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1/input/input4 [ 2.377216] generic-usb 0003:413C:2111.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Wired Entry Keyboard] on usb-0000:00:0b.0-3/input1 [ 2.377236] usbcore: registered new interface driver usbhid [ 2.377240] usbhid: v2.6:USB HID core driver [ 2.379393] usb 2-4: configuration #1 chosen from 1 choice [ 2.388342] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input5 [ 2.388417] generic-usb 0003:045E:0083.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:0b.0-4/input0 [ 2.440088] ssb: Sonics Silicon Backplane found on PCI device 0000:04:07.0 [ 2.440139] b44.c:v2.0 [ 2.480768] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:18:8b:84:1c:bc [ 3.227165] PM: Starting manual resume from disk [ 3.227170] PM: Resume from partition 8:2 [ 3.227172] PM: Checking hibernation image. [ 3.227358] PM: Resume from disk failed. [ 3.245532] EXT4-fs (sda5): barriers enabled [ 3.256349] kjournald2 starting: pid 388, dev sda5:8, commit interval 5 seconds [ 3.256382] EXT4-fs (sda5): delayed allocation enabled [ 3.256385] EXT4-fs: file extents enabled [ 3.258831] EXT4-fs: mballoc enabled [ 3.258853] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 3.790246] type=1505 audit(1563738552.672:2): operation="profile_load" pid=412 name=/usr/share/gdm/guest-session/Xsession [ 3.792631] type=1505 audit(1563738552.672:3): operation="profile_load" pid=413 name=/sbin/dhclient3 [ 3.792929] type=1505 audit(1563738552.672:4): operation="profile_load" pid=413 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.793101] type=1505 audit(1563738552.672:5): operation="profile_load" pid=413 name=/usr/lib/connman/scripts/dhclient-script [ 3.842935] type=1505 audit(1563738552.722:6): operation="profile_load" pid=414 name=/usr/bin/evince [ 3.847854] type=1505 audit(1563738552.722:7): operation="profile_load" pid=414 name=/usr/bin/evince-previewer [ 3.850832] type=1505 audit(1563738552.732:8): operation="profile_load" pid=414 name=/usr/bin/evince-thumbnailer [ 3.880432] type=1505 audit(1563738552.762:9): operation="profile_load" pid=416 name=/usr/lib/cups/backend/cups-pdf [ 3.880798] type=1505 audit(1563738552.762:10): operation="profile_load" pid=416 name=/usr/sbin/cupsd [ 4.622582] Adding 2441208k swap on /dev/sda2. Priority:-1 extents:1 across:2441208k [ 5.014752] EXT4-fs (sda5): internal journal on sda5:8 [ 5.610632] udev: starting version 147 [ 6.450107] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 6.639482] lp: driver loaded but no devices found [ 7.355519] usb-storage: device scan complete [ 7.360137] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0 [ 7.363849] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0 [ 7.367472] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0 [ 7.371108] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0 [ 7.371529] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 7.371627] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 7.371726] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 7.371822] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 7.384739] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 7.485984] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 7.490349] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 7.494342] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 7.855780] nvidia: module license 'NVIDIA' taints kernel. [ 7.855786] Disabling lock debugging due to kernel taint [ 8.117359] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 8.126944] dell-wmi: No known WMI GUID found [ 8.132054] EDAC MC: Ver: 2.1.0 Mar 18 2011 [ 8.134302] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 8.134325] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 8.146076] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 8.146084] alloc irq_desc for 16 on node 0 [ 8.146086] alloc kstat_irqs on node 0 [ 8.146099] nvidia 0000:00:05.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 8.146106] nvidia 0000:00:05.0: setting latency timer to 64 [ 8.146337] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 8.153834] EDAC amd64_edac: Ver: 3.2.0 Mar 18 2011 [ 8.153928] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 8.153931] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 8.153935] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 8.153936] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 8.153938] Might be a BIOS bug, if BIOS says ECC is enabled [ 8.153939] Use of the override can cause unknown side effects. [ 8.153967] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 8.253827] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.557347] __ratelimit: 3 callbacks suppressed [ 8.557352] type=1505 audit(1563738557.432:12): operation="profile_replace" pid=836 name=/usr/share/gdm/guest-session/Xsession [ 8.559274] type=1505 audit(1563738557.432:13): operation="profile_replace" pid=837 name=/sbin/dhclient3 [ 8.559665] type=1505 audit(1563738557.432:14): operation="profile_replace" pid=837 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 8.559836] type=1505 audit(1563738557.432:15): operation="profile_replace" pid=837 name=/usr/lib/connman/scripts/dhclient-script [ 8.565325] type=1505 audit(1563738557.442:16): operation="profile_replace" pid=838 name=/usr/bin/evince [ 8.570921] type=1505 audit(1563738557.452:17): operation="profile_replace" pid=838 name=/usr/bin/evince-previewer [ 8.573876] type=1505 audit(1563738557.452:18): operation="profile_replace" pid=838 name=/usr/bin/evince-thumbnailer [ 8.580438] type=1505 audit(1563738557.462:19): operation="profile_replace" pid=840 name=/usr/lib/cups/backend/cups-pdf [ 8.580804] type=1505 audit(1563738557.462:20): operation="profile_replace" pid=840 name=/usr/sbin/cupsd [ 8.583807] type=1505 audit(1563738557.462:21): operation="profile_replace" pid=841 name=/usr/sbin/tcpdump [ 9.189521] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 9.189529] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 9.189559] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 10.820091] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6 [ 11.680210] input: HDA NVidia Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:10.1/sound/card0/input7 [ 11.680291] input: HDA NVidia Mic at Ext Front Jack as /devices/pci0000:00/0000:00:10.1/sound/card0/input8 [ 11.680352] input: HDA NVidia Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:10.1/sound/card0/input9 [ 11.680410] input: HDA NVidia Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:10.1/sound/card0/input10 [ 11.680473] input: HDA NVidia Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:10.1/sound/card0/input11 [ 11.680534] input: HDA NVidia Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:10.1/sound/card0/input12 [ 11.680599] input: HDA NVidia Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:10.1/sound/card0/input13 [ 11.680658] input: HDA NVidia HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:10.1/sound/card0/input14 [ 12.418614] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.680099] ppdev: user-space parallel port driver [ 14.698976] usplash:351 freeing invalid memtype ffffffffe0000000-ffffffffe8000000 [ 16.040173] b44: eth0: Link is up at 100 Mbps, full duplex. [ 16.040177] b44: eth0: Flow control is off for TX and off for RX. [ 16.040558] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 26.140026] eth0: no IPv6 routers present [ 76.500023] Clocksource tsc unstable (delta = -249909195 ns)