Bon, j'ai trouvé comment dupliquer le port optique avec ce routeur.
Il faut se connecter en telnet (par défaut: id = root / mdp = admin).
WAP>set ethportmirror sourceport 10 destport 3 mirrordate 2 enable 1
sourceport : value range [1-5:eth/9:cpu/10:pon]
destport : eth port value range [1-5]
mirrordate : direction [0:out/1:in/2:all]
enable : switch [1:enable/0:disable]
J'ai finalement installé Wireshark sous linux (impossible d'obtenir les VLAN avec windows même avec les modifications de base de registre pour les cartes intel):
No. Time Source Destination ProtocolLength Info VLAN
17875 35.688965737 0.0.0.0 255.255.255.255 DHCP 594 DHCP Discover - Transaction ID 0x20620a32 667
17878 35.715748587 10.22.x.x 10.22.x.x DHCP 363 DHCP Offer - Transaction ID 0x20620a32 667
17881 35.725212098 0.0.0.0 255.255.255.255 DHCP 594 DHCP Request - Transaction ID 0x20620a32 667
17888 35.752610858 10.22.x.x 10.22.x.x DHCP 363 DHCP ACK - Transaction ID 0x20620a32 667
En DHCP discover, je ne retrouve aucune information d'authentification ONT:
Frame 17875: 594 bytes on wire (4752 bits), 594 bytes captured (4752 bits) on interface ens16, id 0
Ethernet II, Src: HuaweiTe_xx:xx:xx (dc:99:14:xx:xx:xx), Dst: Broadcast (ff:ff:ff:ff:ff:ff)
802.1Q Virtual LAN, PRI: 1, DEI: 0, ID: 667
Internet Protocol Version 4, Src: 0.0.0.0, Dst: 255.255.255.255
User Datagram Protocol, Src Port: 68, Dst Port: 67
Dynamic Host Configuration Protocol (Discover)
Message type: Boot Request (1)
Hardware type: Ethernet (0x01)
Hardware address length: 6
Hops: 0
Transaction ID: 0x20620a32
Seconds elapsed: 0
Bootp flags: 0x0000 (Unicast)
Client IP address: 0.0.0.0
Your (client) IP address: 0.0.0.0
Next server IP address: 0.0.0.0
Relay agent IP address: 0.0.0.0
Client MAC address: HuaweiTe_xx:xx:xx (dc:99:xx:xx:xx:xx)
Client hardware address padding: 00000000000000000000
Server host name not given
Boot file name not given
Magic cookie: DHCP
Option: (53) DHCP Message Type (Discover)
Length: 1
DHCP: Discover (1)
Option: (61) Client identifier
Length: 7
Hardware type: Ethernet (0x01)
Client MAC address: HuaweiTe_xx:xx:xx (dc:99:14:xx:xx:xx)
Option: (50) Requested IP Address (10.22.x.x)
Length: 4
Requested IP Address: 10.22.x.x
Option: (55) Parameter Request List
Length: 15
Parameter Request List Item: (1) Subnet Mask
Parameter Request List Item: (3) Router
Parameter Request List Item: (6) Domain Name Server
Parameter Request List Item: (12) Host Name
Parameter Request List Item: (15) Domain Name
Parameter Request List Item: (28) Broadcast Address
Parameter Request List Item: (33) Static Route
Parameter Request List Item: (40) Network Information Service Domain
Parameter Request List Item: (41) Network Information Service Servers
Parameter Request List Item: (42) Network Time Protocol Servers
Parameter Request List Item: (43) Vendor-Specific Information
Parameter Request List Item: (100) PCode
Parameter Request List Item: (120) SIP Servers
Parameter Request List Item: (121) Classless Static Route
Parameter Request List Item: (249) Private/Classless Static Route (Microsoft)
Option: (255) End
Option End: 255
Padding: 000000000000000000000000000000000000000000000000000000000000000000000000…
Une idée ??
Merci !
Routeur