Bonjour à tous,
Tout est dans le titre, je sèche un peu depuis plusieurs jours, je tente de configurer un juniper srx240 mais rien n'y fait..
L'interface connecté au ONT :
ge-0/0/13 {
vlan-tagging;
unit 0 {
encapsulation ppp-over-ether;
vlan-id 835;
}
}
La config de l'interface pp :
pp0 {
description "Uplink Fibre";
traceoptions;
unit 0 {
ppp-options {
chap {
default-chap-secret "xxxxxx"; ## SECRET-DATA
local-name fti/xxxxxx;
no-rfc2486;
passive;
}
pap {
default-password "xxxxxx"; ## SECRET-DATA
local-name fti/xxxxxx;
local-password "xxxxxx"; ## SECRET-DATA
passive;
}
}
pppoe-options {
underlying-interface ge-0/0/13.0;
idle-timeout 0;
auto-reconnect 3;
client;
}
family inet {
mtu 1492;
negotiate-address;
}
}
}
les stats :
>show pppoe interfaces
pp0.0 Index 97
State: PADI sent, Session ID: None,
Service name: None,
Session AC name: None, Configured AC name: None,
Remote MAC address: 00:00:00:00:00:00,
Auto-reconnect timeout: 3 seconds, Idle timeout: Never,
Underlying interface: ge-0/0/13.0 Index 96
> show pppoe statistics
Active PPPoE sessions: 0
PacketType Sent Received
PADI 22 0
PADO 0 0
PADR 0 0
PADS 0 0
PADT 0 0
Service name error 0 0
AC system error 0 0
Generic error 0 0
Malformed packets 0 0
Unknown packets 0 0
Timeout
PADI 3
PADO 0
PADR 0
Receive Error Counters
PADI 0
PADO 0
PADR 0
PADS 0
Les PADI sont envoyés mais rien en retour.. j'ai déjà parcouru tout le forum, j'ai vu pas mal d'exemple mais je tourne en rond.. need help please