Auteur Sujet: Routeur SFP pour remplacer bbox fibre + ONT (Lu 82341 fois)

monoeilouais · « **Réponse #120 le:** 03 février 2021 à 21:22:52 »

Citation de: Slothy le 25 novembre 2020 à 22:05:31

Bon, j'ai réessayé mon G-010S-A avec Bouygues, je suis O5 comme d'hab mais pas de trafic. J'ai mis l'IMEI en SLID (avec 5 0 devant) et la MAC, par contre le S/N je vois pas comment, j'ai un ONT externe et il commence par 485754.... donc on est pas dans le code opérateur qu'il attend.

Mon omci.log dit qu'il est content, jusqu'au moment ou il ne l'est plus, mais je comprend pas trop (quelques valeurs sont masquées) :

Code: [Sélectionner]
ONTUSER@SFP:~# cat /tmp/omci.log OMCI_LIB: Parser:Running in background isInitializedParser() hi_ploam_init succeeded, error = 0x00000000 InitializeOmciMgr OperatorId=ALCL /configs/oltInfo not exist setDynamicTpidFlag,isDynamicTpic=0 VNPT unlock proposal should not take effect. ethConfig() onu_mode = 1 ********OMCI Config Data Begin**************** ****ONU Type : 0 ****onu mode : 1 ****max lan num : 1 ****max wifi num: 0 ****max wifi id start: 1 ****check wifi state: no ****port 0 config by omci: 1 ****dscp to Pbit for untag Config By OMCI: yes ****support double tag rules us: yes ****support double tag rules ds: yes ****support pbit Unmatch Rules: yes ****support Bcast Unmatch Rules: no ****support omci manage HGU port: no ****HGU single port=false ****support omci replace after ranging : no ****support Dynamic Tpid : no ****support Cox : no ****factory mode: 0 ********OMCI Config Data End**************** user_port class domain =================================== 1 ETH SFU =================================== stub function only for build stub function only for build registTimerEvent,Line:277. registTimerEvent,Line:283.timerId=0,intervalMs=300000. registTimerEvent,Line:277. registTimerEvent,Line:283.timerId=1,intervalMs=1000. write to /configs/omciMsgFileID.txt failed registTimerEvent,Line:277. registTimerEvent,Line:283.timerId=2,intervalMs=0. OMCI_LIB: Parser: isInitializedParser returned true OMCI_LIB: Parser:Queue Created InitPortStream() maxPort=1, enet=1,moca=0 InitPortStream:: ONU type is SFU ---get_port_info_by_id---user_port:1,port_info:1,0,0 >>>>>>>>printThresh ponRxHighThresh = -7.958800 ponRxLowThresh = -28.386320 ponTxHighThresh = 5.051500 ponTxLowThresh = 0.499928 ponBiasHighThresh = 40.000000 ponBiasLowThresh = 2.800000 ponTempLowThresh = -40.000000 ponTempHighThresh = 85.000000 ponVolHighThresh = 3.465000 ponVolLowThresh = 3.135000 ponTempLowWarnThresh = -40.000000 ponTempHighWarnThresh = 85.000000 ponVolHighWarnThresh = 3.465000 ponVolLowWarnThresh = 3.135000 ponBiasHighWarnThresh = 0.000000 ponBiasLowWarnThresh = 0.000000 ponRxHighWarnThresh = 0.000000 ponRxlLowWarnThresh = 0.000000 ponTxHighWarnThresh = 0.000000 ponTxLowWarnThresh = 0.000000 main: msgget action_process qid failed, err = 2, No such file or directory main: msgget action_process qid failed, err = 2, No such file or directory set_port_num_for_portmgr .......ethport<1> <0> cesport<0> dslport<0> voiceport<0> videoport<0> [OMCI-PORTMGR] send_msg_to_portmgr ...............msgType is <a0003> reset_all_tsched ... registTimerEvent,Line:277. registTimerEvent,Line:283.timerId=0,intervalMs=500. registTimerEvent,Line:277. registTimerEvent,Line:283.timerId=1,intervalMs=3000. registTimerEvent,Line:277. registTimerEvent,Line:283.timerId=2,intervalMs=1500. registTimerEvent,Line:277. registTimerEvent,Line:283.timerId=3,intervalMs=100000. PortPmHandler registered PortPmHandler registered PortPmHandler registered PortPmHandler registered PortPmHandler registered PortPmHandler registered PortPmHandler registered create_actionProcess_thread id = 1996420384 registTimerEvent,Line:277. registTimerEvent,Line:283.timerId=4,intervalMs=10000. In deleteAllFlowInDataModel >>>>>>>>isEnableOmciQOSConf get ONTOMCIQOSInfoObject info is false! actionProcess_thread pid = 1524 initialize loid ... evtNotifyHandleFunInit ... evtNotifyHandleFunInit thread id = 1994323232 CfgmgrevtNotifyHandleFunInit ... CfgmgrevtNotifyHandleFunInit thread id = 1992226080 isOnuTimeEnable ... >>>>>>>>getMaxGroupValue >>>>>>>>IgmpMaxGroups::1024 Error: OmciMain failed to get the EfmOAM Process qid. configMcastFlow ... evtNotifyHandle pid = 1524 getEvtMsgHandle:74::msghandle = 0xc80ca8.msghandle->commFd=10. The commFd = 10 /configs/oltInfo not exist OMCI_LIB:Mgr: InitializeOmciMgr returned >>>>>>>ReadCapabilityFromApp<<<<<<<<< >>>>>>>getOntCapability<<<<<<<<< >>>>>>>>setCardType, card id = 14, type = 48 >>>>>>>>setCardType, card id = 1, type = 24 NON-VEIP_PORT found OMCI_LIB: Info: Max simultaneous groups : 1024 OMCI_LIB: >>>>>>>>>>> ONT Capability <<<<<<<<<<<< ONT Type :(2) VOIP Type :(1) INTEGRATED_ONT :(1) OMCC_VERSION :(134) CUSTOMER ID :(0) Number of cards :(2) Number of eth Ports :(1) Card Number :0 0)Card Type :48 0)Slot IDpe :14 0)Number of ports :1 Card Number :1 1)Card Type :24 1)Slot IDpe :1 1)Number of ports :1 Total Number of Ports :(2) Port Number :0 0)portType :7 0)Slot ID :14 0)Port ID :1 0)Mgmt Capability :0 0)VEIP SLOT ID :0 0)VEIP PORT ID :0 Port Number :1 1)portType :2 1)Slot ID :1 1)Port ID :1 1)Mgmt Capability :0 1)VEIP SLOT ID :0 1)VEIP PORT ID :0 OMCI_LIB: >>>>>>>>>>>End of ONT Capability <<<<<<<<<<<< /configs/zeroman/imageCounter not exist getImageNumber ,imgcount = 2. >>>>getSwVerInfo(),imageBank:0,version:3FE46398AFGB89 OMCI_LIB: OmciMain:: Calling getSwImageInfo()call getSwImageInfo:Line:255. call special_process_depended_board:Line:202. special_process_depended_board:exit. call special_process_depended_board:Line:202. special_process_depended_board: call swdl_commit. >>>>configLptPort: onu state is ONU_LOS_LOF actionProcess_thread: msgrcv msg pointer adress 0xc7f4f0 processAction:action type=116,messages still in queue=-1,totalMsgCounter=0 start @ 0m:59s 641ms processAction: result is: SUCCESS end @ 0m:59s 642ms checkPonLEDStatus:Fiber disconnected special_process_depended_board:exit. getSwImageInfo:exit. OMCI_LIB: OmciMain:: got 'ONU_SWIMAGE_INFO' with value 0x1e >>>>getSwVerInfo(),imageBank:1,version:3FE46398AFGB89 read_sn_from_RI sn is: PTINffffff91 getOmciOntvalues: Serial_Number = PTIN:ffffff91xxxxffffffd3 getOmciOntvalues: YP_Serial_Num = PTIN91xxxxD3 getOmciOntvalues: vendor_id = PTIN getOmciOntvalues: HardwareVersion = 3FE46541AAAA getOmciOntvalues: ICS = 01 getOmciOntvalues: MACAddress = 60:2e:20:10:xx:xx getOmciOntvalues: Factorycode = 08 getOmciOntvalues: original RI cleicode = BVL3A8JNAA, length = 10 getOmciOntvalues: Mnemonic = G-010S-A getOmciOntvalues: onu equipid(CleiCode+Mnemonic) = BVL3A8JNAAG010SA >>>>>>>>getGponConfInfo totalTcontNum = 9 totalGemPortNum = 254 totalUSPQNum = 64 totalDSPQNum = 8 numPqPerTcont = 8 numPqPerUni = 8 totalTSchedNum = 8 >>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0 >>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0 >>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0 >>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0 >>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0 >>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0 >>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0 >>>>>>>>getTSchedInfo, tschedId = 0x0, tschedCfg.tschedId = 0x8001 >>>>>>>>getTSchedInfo, tschedId = 0x1, tschedCfg.tschedId = 0x8002 >>>>>>>>getTSchedInfo, tschedId = 0x2, tschedCfg.tschedId = 0x8003 >>>>>>>>getTSchedInfo, tschedId = 0x3, tschedCfg.tschedId = 0x8004 >>>>>>>>getTSchedInfo, tschedId = 0x4, tschedCfg.tschedId = 0x8005 >>>>>>>>getTSchedInfo, tschedId = 0x5, tschedCfg.tschedId = 0x8006 >>>>>>>>getTSchedInfo, tschedId = 0x6, tschedCfg.tschedId = 0x8007 >>>>>>>>getTSchedInfo, tschedId = 0x7, tschedCfg.tschedId = 0x8008 >>>>>>>>getTContInfo, tcontIndex = 0x0, tcontId = 0x8000, policy = 0 >>>>>>>>getTContInfo, tcontIndex = 0x1, tcontId = 0x8001, policy = 1 >>>>>>>>getTContInfo, tcontIndex = 0x2, tcontId = 0x8002, policy = 1 >>>>>>>>getTContInfo, tcontIndex = 0x3, tcontId = 0x8003, policy = 1 >>>>>>>>getTContInfo, tcontIndex = 0x4, tcontId = 0x8004, policy = 1 >>>>>>>>getTContInfo, tcontIndex = 0x5, tcontId = 0x8005, policy = 1 >>>>>>>>getTContInfo, tcontIndex = 0x6, tcontId = 0x8006, policy = 1 >>>>>>>>getTContInfo, tcontIndex = 0x7, tcontId = 0x8007, policy = 1 >>>>>>>>getTContInfo, tcontIndex = 0x8, tcontId = 0x8008, policy = 1 >>>>>>>>getPqWeightInvPolicy OMCI_LIB:PqWeightInvPolicy value=1 OmciMain:: Creating autonomous ME's. >>>>>>>>getGponOpticalAttr getBiasCurrent:: biasCurrent=0.007160 getoptModTemp:: optModTemp=34.849998 getoptModVolt:: optModVolt=3.299988 getOpticalRxSignalLevel:: OpticalRxSignalLevel=-inf getOpticalRxSignalLevel:: OpticalTxSignalLevel=0.000000 getPonRxLowThresh:: ponLowThresh=-28.386320 getPonRxHighThresh:: ponHighThresh=-7.958800 getPonTxLowThresh:: ponLowThresh=-28.386320 getPonTxHighThresh:: ponHighThresh=-7.958800 >>>>>>>>getLastDsoTime >>>>>>>>getQosCfgFlexibility Value of bit position is 5 Inside HguTr069ConfigItf constructor... Value of bit position is 8 Entering TurboOctetStringItf constructor... Value of bit position is 9 GemCtpItf:GemCtpItf: maxNumOfInstances=254 >>>>>checkLanState(port:1,original _connect:-1,isConnect:0) loss_alarm : user_port 1 -> isConnect 0 loss_alarm : send message of AIS [alarmState]=1 omciMgr/lanLossIndiacteToCFM: ERR, send_alarm_msg to cfmoam Value of bit position is 0 >>>>sendPwrSheddingDatatoApp [OMCI-PORTMGR] send_msg_to_portmgr ...............msgType is <a0004> Value of bit position is 13 getLoidAuthInfo() @ 1m:0s:735ms getLoidAuthInfo() exit @ 1m:0s:744ms, : >>>>>>>>getTrafficMgmtOption - create_instance_auto() act_plugInUnitType = 48 IN VEIP SubscriberLinecard:index-0 No of ports = 1>>>>configUniTaggingMode(instanceId=e01,tagmode=2) actionProcess_thread: msgrcv msg pointer adress 0xc83880 processAction:action type=108,messages still in queue=-1,totalMsgCounter=1 start @ 1m:0s 746ms configUniAction(portId=e01,mode=2) processAction: result is: SUCCESS VEIP::(3585) successfully created create_instance_auto::create Tr069MgmtServer ME >>>>>>>>configRateLimit protocol = 1, rate_limit = 10 >>>>>>>>configRateLimit protocol = 2, rate_limit = 10 >>>>configUniTaggingMode(instanceId=e01,tagmode=2) - create_instance_auto() act_plugInUnitType = 24 OMCI_LIB: TEN_BASE_T: indexID: 1 ConfigFile3::No of ethernet ports after assignment is :1 - LanUniPptpItf::create_instance_auto(inst=101,port_type=0) >>>>getPhyDevConfig(portId=101) @ 1: 0:751ms end @ 1m:0s 747ms actionProcess_thread: msgrcv msg pointer adress 0xc84ba0 processAction:action type=108,messages still in queue=0,totalMsgCounter=3 start @ 1m:0s 752ms configUniAction(portId=e01,mode=2) processAction: result is: SUCCESS end @ 1m:0s 753ms portId-101,state=0,confInd=0 getPhyDevConfig() exit @ 1: 0:760ms >>>>getPhyDevConfig(portId=101) @ 1: 0:761ms portId-101,state=0,confInd=0 getPhyDevConfig() exit @ 1: 0:762ms >>>>configUniTaggingMode(instanceId=101,tagmode=2) actionProcess_thread: msgrcv msg pointer adress 0xc83880 processAction:action type=108,messages still in queue=-1,totalMsgCounter=3 start @ 1m:0s 763ms configUniAction(portId=101,mode=2) processAction: result is: SUCCESS end @ 1m:0s 764ms LanUniPptpItf::create_instance_auto return result=1 Inside configLtpPonLossBehavior instance id 257 and mode 2 EthSLC:gatewayUniSupp1 with ID=257 create success for Lan Uni ID 257 >>>>>>>>configRateLimit protocol = 1, rate_limit = 10 >>>>>>>>configRateLimit protocol = 2, rate_limit = 10 >>>>configUniTaggingMode(instanceId=101,tagmode=2) >>>>configUniDot1xParams(portId=101,dot1x_enable=0,action_register=3) total no of ports in lan sub card 2 TEN_100BT_PORT found with instance id=257---port no=1 actionProcess_thread: msgrcv msg pointer adress 0xc83880 processAction:action type=108,messages still in queue=1,totalMsgCounter=6 start @ 1m:0s 776ms configUniAction(portId=101,mode=2) processAction: result is: SUCCESS end @ 1m:0s 777ms actionProcess_thread: msgrcv msg pointer adress 0xc83a90 processAction:action type=220,messages still in queue=0,totalMsgCounter=6 start @ 1m:0s 778ms >>>>configUniDot1xParamsAction(portId=101,dot1x_enable=0,action_register=3) processAction: result is: SUCCESS end @ 1m:0s 779ms lan uni mgmt cap=0 lan uni veipSlotId=0 lan uni veipPortId=0 Entered UNIItf:: create_instance_auto UNI::UNI:m_mgmt_capability=0--m_nonomci_mgmt_id=0 UNI::constructor:Create instance:Instance-ID:-(0x0101) uniPptp_p insert() successful UNI-G auto created for LAN UNI with port num=:1 >>>>>>>>getSysUpTime >>>>>>>>getSysUpTime >>>>>>>>getOnuConnCapability ONT2Gpon::Going to set the DEAFULT_BRIDGING_MODE >>>>>>>>setOnuConnMode, mode = 5 actionProcess_thread: msgrcv msg pointer adress 0xc839a0 processAction:action type=222,messages still in queue=-1,totalMsgCounter=6 start @ 1m:0s 799ms processAction: result is: FAILED end @ 1m:0s 808ms >>>>>>>>getQosCfgFlexibility >>>>>>>>getTrafficMgmtOption Inside IpHostConfig::IpHostConfig--instancd id=0 getLoidAuthInfo() @ 1m:0s:811ms getLoidAuthInfo() exit @ 1m:0s:811ms, : >>>>>>>>getOnuTxPwrSupplyCtrl omciMgr is running!!! Evtmgr process not exist! notify_evtMgr_lan_status() return! msgsnd succeeded OmciMain:: Received LAN_ALARM--@01m:00s:907ms LAN_ALARM:alarm_id=70--instance id=257--alarmstate=1--numofethports=1 OmciMain:: Response Msg Sent--@01m:00s:908ms call getSwImageInfo:Line:255. call special_process_depended_board:Line:202. /configs/oltInfo not exist special_process_depended_board:exit. call special_process_depended_board:Line:202. special_process_depended_board: call swdl_commit. special_process_depended_board:exit. getSwImageInfo:exit. OMCI_LIB: Got swImageInfo = 1e, standby = 0 call getSwImageInfo:Line:255. call special_process_depended_board:Line:202. call special_process_depended_board:Line:202. getSwImageInfo:exit. OMCI_LIB: Got swImageInfo = 0, standby = 3 call getSwImageInfo:Line:255. call special_process_depended_board:Line:202. call special_process_depended_board:Line:202. getSwImageInfo:exit. OMCI_LIB: Got swImageInfo = 0, standby = 5 OMCI_LIB:Parser:DownloadInit complete OMCI_LIB: Parser Running rangingEnable. read_sn_from_RI sn is: PTINffffff91 >>>>>checkLanState(port:1,original _connect:0,isConnect:1) loss_alarm : user_port 1 -> isConnect 1 loss_alarm : send message of AIS [alarmState]=0 omciMgr/lanLossIndiacteToCFM: ERR, send_alarm_msg to cfmoam Evtmgr process not exist! notify_evtMgr_lan_status() return! OmciMain:: Received LAN_ALARM--@01m:03s:929ms LAN_ALARM:alarm_id=70--instance id=257--alarmstate=0--numofethports=1 OmciMain:: Response Msg Sent--@01m:03s:929ms msgsnd succeeded >>>>>checkLanState(Current Online port:0,Previous Online Port:65535) updateDownstreamFlow:currentOnPort(0),savedPrePort(65535)!! actionProcess_thread: msgrcv msg pointer adress 0xc80cc0 processAction:action type=11,messages still in queue=-1,totalMsgCounter=7 start @ 1m:3s 933ms configVeipFlowsonEthPort: portId:257. processAction: result is: SUCCESS end @ 1m:3s 934ms >>>>>>>>activeGponAlarm: alarmId = 63 msgsnd succeeded >>>>>>>>trigger signal low alarm ,cur_value=-inf,alarmThresh=-28.386320,warnThresh=-27.000000,allowedness=0.500000. alarmactived=1,warnactived=0,lastalarmactived=0,lastwarnactived=0,alarmcounter=0. OmciMain:: Received GPON_MAC_ALARM--@01m:05s:601ms GPON_MAC_ALARM:alarm_id=63--instance id=0--alarmstate=1 OmciMain:: Response Msg Sent--@01m:05s:601ms RX_ONT_MSG -- @01m:05s:606ms Msg_type = ALARM Trans_id = 00 Alarm seq nbr = 01 Entity_id = ANI_G Instance_id = 8001 Alarm mask = 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OMCI msg construction = SUCCESSFUL TX_OMCI_MSG bytes[06-13]: 00 00 10 0a 01 07 80 01 bytes[14-45]: 80 00 00 00 00 00 00 00 00 00 00 : 00 00 00 00 00 00 00 00 00 00 00 : 00 00 00 00 00 00 00 00 00 01 - OMCI_TX# 1@ 1m: 5s: 625ms-00 00 10 0A 01 07 80 01 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 SendMsgToSlid: msgget failed, err = 2, No such file or directory Enter notify_sipw_pon_status, onustate=2 >>>>>>>>deActiveGponAlarm: alarmId = 63 OmciMain:: Received GPON_MAC_ALARM--@08m:46s:274ms GPON_MAC_ALARM:alarm_id=63--instance id=0--alarmstate=0 OmciMain:: Response Msg Sent--@08m:46s:275ms RX_ONT_MSG -- @08m:46s:275ms Msg_type = ALARM Trans_id = 00 Alarm seq nbr = 02 msgsnd succeeded >>>>>>>>deative signal low alarm ,cur_value=-16.799179,alarmThresh=-28.386320,warnThresh=-27.000000,allowedness=0.500000. Entity_id = ANI_G Instance_id = 8001 Alarm mask = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OMCI msg construction = SUCCESSFUL TX_OMCI_MSG bytes[06-13]: 00 00 10 0a 01 07 80 01 bytes[14-45]: 00 00 00 00 00 00 00 00 00 00 00 : 00 00 00 00 00 00 00 00 00 00 00 : 00 00 00 00 00 00 00 00 00 02 - OMCI_TX# 2@ 8m:46s: 292ms-00 00 10 0A 01 07 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 checkPonVidStatus: statePrevious=0, state=1 OmciMain:: OMCI Link Status is UP--@08m:47s:929ms OmciMain:: Response Msg Sent--@08m:47s:929ms >>>>configAllEthPortDownUp actionProcess_thread: msgrcv msg pointer adress 0xc80cc0 processAction:action type=233,messages still in queue=-1,totalMsgCounter=8 start @ 8m:47s 933ms >>>>configAllEthPortDownUpAction SendMsgToSlid: msgget failed, err = 2, No such file or directory Enter notify_sipw_pon_status, onustate=3 notify_sipw_pon_status: get SIPW queue failed, err = 2, No such file or directory >>>>configLptPort: onu state is ONU_REGISTERED checkPonLEDStatus:Fiber connected Evtmgr process not exist! notify_evtmgr_pon_status() return! processAction: result is: SUCCESS end @ 8m:48s 19ms actionProcess_thread: msgrcv msg pointer adress 0xc80cc0 processAction:action type=116,messages still in queue=0,totalMsgCounter=10 start @ 8m:48s 28ms processAction: result is: SUCCESS end @ 8m:48s 28ms ONTUSER@SFP:~#

Salut salut,
Je n'arrive pas à lâcher l'affaire et je cherche toujours à faire fonctionner ce satané G-010S-A.
J'ai donc parcouru les logs et comme toi, au moment de l'initialisation, j'ai une valeur de niveau de signal en réception qui est marqué -inf, soit au delà du seuil.

Code: [Sélectionner]

getOpticalRxSignalLevel:: OpticalRxSignalLevel=-inf
Et donc, au moment de faire le test de réception, une alerte est levée :

Code: [Sélectionner]

>>>>>>>>trigger LOW_RCVD_OPT_PWR_ALARM,cur_value=-inf,alarmThresh=-28.386320,warnThresh=-28.000000,allowedness=0.500000.
alarmactived=1,warnactived=0,lastalarmactived=0,lastwarnactived=0,alarmcounter=0.

Je ne comprends pas ce que veut dire ce -inf.

faycalbdhn · « **Réponse #121 le:** 06 février 2021 à 05:54:11 »

J’ai exactement le même problème, et aussi le fait que la fibre n’est pas détectée et que ca bloque dans le statut O1, je peux joindre mon Omci sauf que c’est le même que celui d’au-dessus

njd90 · « **Réponse #122 le:** 01 avril 2021 à 23:25:34 »

Hello,

J'ai reçu l'ONU G-010S-A et je l'ai connecté à mon switch Dell N2024 en attendant de recevoir une carte broadcom.
Il est reconnu et j'arrive à me connecter en http et ssh. J'ai donc suivi les précieuses informations des posts pour le configurer.
Lorsque je branche la fibre dessus, je passe bien en O5, donc reconnu par l'OLT.
Dès que j'ai passé l'étape O5, je perds la connexion ssh avec l'ONU, ce qui semble normal d'après ce que j'ai lu. Pouvez-vous me le confirmer ?

Par contre, impossible d'obtenir l'adresse IP publique. Je ne vois pas ce qui pourrait bloquer, quelqu'un aurait une piste ?

Pour info, j'ai un trunk entre le switch et mon routeur. Le vlan 100 est taggé coté routeur (OPNSense).
La config routeur est correcte car elle fonctionne très bien quand je passe par l'ONT externe huawei (Offre Must)

Ci joint les logs de l'ONU :

Code: [Sélectionner]

RX_ONT_MSG -- @04m:16s:540ms
Msg_type    = ALARM
Trans_id    = 00
Alarm seq nbr = 03
Entity_id   = ANI_G
Instance_id = 8001
Alarm mask = 00 00 00 00 00 00 00 00 00 00 msgsnd succeeded
>>>>>>>>deative signal low alarm ,cur_value=-15.588014,alarmThresh=-28.386320,warnThresh=-27.000000,allowedness=0.500000.
OmciMain:: Response Msg Sent--@04m:16s:540ms

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
OMCI msg construction = SUCCESSFUL

TX_OMCI_MSG
bytes[06-13]: 00  00  10  0a  01  07  80  01
bytes[14-45]: 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  03 -
OMCI_TX#   3@   4m:16s: 558ms-00 00 10 0A 01 07 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03
omciMgr:264processMessage:111:Wrong msg! dataLength=0 expected=3
checkPonVidStatus: statePrevious=0, state=1
OmciMain:: OMCI Link Status is UP--@04m:24s:973ms
OmciMain:: Response Msg Sent--@04m:24s:973ms

SendMsgToSlid: msgget failed, err = 2, No such file or directory
Enter notify_sipw_pon_status, onustate=3
notify_sipw_pon_status: get SIPW queue failed, err = 2, No such file or directory
>>>>configAllEthPortDownUp

actionProcess_thread: msgrcv msg pointer adress 0x6824c0
processAction:action type=233,messages still in queue=-1,totalMsgCounter=7
start @ 4m:24s 982ms
>>>>configAllEthPortDownUpAction
checkPonLEDStatus:Fiber connected
GPON_STATUS time: <264>, state is CONNECTED
The processMessage is called from OMCI by CfgmgrevtNotifyHandle_thread
send_csmsg() send successfully!
notify_evtmgr_pon_status() successfully to send msg to evtmgr from omciMgr!
processAction: result is: SUCCESS
end @ 4m:24s 995ms
OMCI_RX#   1@   4m:26s: 446ms-28 40 49 0A 00 02 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 D1 95 00 4B



RX_OMCI_MSG
bytes[06-13]: 28  40  49  0a  00  02  00  00
bytes[14-45]: 80  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00 -
SYNTAX CHECK RESULT = SUCCESSFUL.


TX_ONT_MSG -- @04m:26s:450ms
Msg_type    = GET
Trans_id    = 01
Entity_id   = ONT DATA
>>>>on_omci_start_io()
Instance_id = 00
mib_data_sync.status = VALID
OmciMain:: Received MSG_N_OMCI_GET:Entity_id(02-00);instance_id(0x0000)--@04m:26s:453ms
OmciMain:: Response Msg Sent--@04m:26s:458ms


RX_ONT_MSG -- @04m:26s:458ms
Msg_type    = GET RESPONSE
Trans_id    = 01
Entity_id   = ONT DATA
Instance_id = 00
Sub entity Id :NO SUB ENTITY ID
Result_reason = COMMAND_PROCESSED_SUCCESSFULLY
mib_data_sync.status = VALID
mib_data_sync.value = 00
Duration : 00s:004ms
OMCI msg construction = SUCCESSFUL

TX_OMCI_MSG
bytes[06-13]: 28  40  29  0a  00  02  00  00
bytes[14-45]: 00  80  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00 -
OMCI_TX#   1@   4m:26s: 462ms-28 40 29 0A 00 02 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
OMCI_RX#   2@   4m:26s: 466ms-28 41 4F 0A 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 B0 13 9A BE



RX_OMCI_MSG
bytes[06-13]: 28  41  4f  0a  00  02  00  00
bytes[14-45]: 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00 -
SYNTAX CHECK RESULT = SUCCESSFUL.

OmciMain:: MIB Reset Msg Rcvd--@04m:26s:471ms
OMCIItf::MSG_MIB_RESET received.
>>>>pmResetApp(pmMsg->msgType=6,pmMsg->meId=0,pmMsg->portId=0x0)
OMCIItf:: MIB Reset-PM Reset successful
>>>>mibReset()@4m:26s 471ms

TX_ONT_MSG -- @04m:26s:472ms
Msg_type    = MIB_RESET
Trans_id    = 02
Entity_id   = ONT DATA
Instance_id = 00

RX_ONT_MSG -- @04m:26s:473ms
Msg_type    = MIB_RESET RESPONSE
Trans_id    = 02
Entity_id   = ONT DATA
Instance_id = 00
Result_reason = COMMAND_PROCESSED_SUCCESSFULLY
Duration : 00s:002ms
OMCI msg construction = SUCCESSFUL

TX_OMCI_MSG >>>>mib_reset_flow() @ 4m:26s 479ms

bytes[06-13]: 28  41  2f  0a  00  02  00  00
bytes[14-45]: 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00 -
OMCI_TX#   2@   4m:26s: 481ms-28 41 2F 0A 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

actionProcess_thread: msgrcv msg pointer adress 0x6824c0
processAction:action type=10,messages still in queue=-1,totalMsgCounter=8
start @ 4m:26s 483ms
------pon led------MIB_REST,OmciUpValidVlanNbr:0
OMCI_RX#   3@   4m:26s: 484ms-28 42 49 0A 00 83 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 13 7C DD F8



RX_OMCI_MSG
bytes[06-13]: 28  42  49  0a  00  83  00  00
bytes[14-45]: 80  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00 -
SYNTAX CHECK RESULT = SUCCESSFUL.

mib_reset_flow_Action()
delete_all_flow()
delete_all_gemport()
delete_all_pq()
delete_all_tcont()
>>>>mib_reset_flow() exit @4m:26s 484ms
the OLT verion oltBase=3 r

TX_ONT_MSG -- @04m:26s:505ms
Msg_type    = GET
Trans_id    = 03
Entity_id   =  OLT G
Instance_id = 00
olt_vendor_id.status = VALID
eqpt_id.status = NOT VALID
olt_version.status = NOT VALID
time_of_day_info.status = NOT VALID
>>>>>>>>resetMcastDynamicAcl,
mibReset() exit @4m:26s 521ms
MIB RESET: Num of interface:86
OMCIItf: Mib Interface: 0  start reset time@04m:26s:523ms

>>>>setGponOpticalAttr()
setGponOpticalAttr:: ponRxLowThresh=-28.386320
setGponOpticalAttr:: ponRxHighThresh=-7.958800
processAction: result is: SUCCESS
end @ 4m:26s 529ms

actionProcess_thread: msgrcv msg pointer adress 0x6824c0
processAction:action type=234,messages still in queue=1,totalMsgCounter=11
start @ 4m:26s 530ms
processAction:action type=234,paramType=2,paramValue=-28.
configGponOpticalAttrAction::paramType=2,paramValue = -28.
processAction: result is: SUCCESS
end @ 4m:26s 531ms
setGponOpticalAttr:: ponTxLowThresh=0.499928
setGponOpticalAttr:: ponTxHighThresh=5.051500
OMCIItf: Mib Interface: 1  start reset time@04m:26s:533ms

>>>>>>>>getTrafficMgmtOption
OntGpon in set_to_default::m_trafficManagement=2
call getSwImageInfo:Line:257.
call special_process_depended_board:Line:205.
processAction:action type=234,messages still in queue=0,totalMsgCounter=11
start @ 4m:26s 543ms
processAction:action type=234,paramType=1,paramValue=-7.
configGponOpticalAttrAction::paramType=1,paramValue = -7.
processAction: result is: SUCCESS
end @ 4m:26s 549ms
special_process_depended_board:exit.
call special_process_depended_board:Line:205.
special_process_depended_board:exit.
getSwImageInfo:exit.
OMCI_LIB: set_to_default:: got 'ONU_SWIMAGE_INFO' with value b
OMCIItf: Mib Interface: 2  start reset time@04m:27s:071ms

>>>>>>>>setOnuConnMode, mode = 5

actionProcess_thread: msgrcv msg pointer adress 0x6824c0
processAction:action type=222,messages still in queue=0,totalMsgCounter=12
start @ 4m:27s 72ms
processAction: result is: FAILED
end @ 4m:27s 73ms
OMCIItf: Mib Interface: 3  start reset time@04m:27s:072ms

OMCIItf: Mib Interface: 4  start reset time@04m:27s:074ms

OMCIItf: Mib Interface: 5  start reset time@04m:27s:075ms

>>>>setPhyDevConfig(portId=0x101,state=1,phyModeSet=0) onuType=0 @  4:27: 74ms
AggEthPm::delEthPort(1)
AggEthPm::delEthPort(1) is not there
cfg_PhyDev : user_port 257,speed 4,mode=2
[OMCI-PORTMGR] send_msg_to_portmgr ...............msgType is <a0005>
setPhyDevConfig() exit @  4:27: 80ms
>>>>>>>>configRateLimit protocol = 1, rate_limit = 10
>>>>>>>>configRateLimit protocol = 2, rate_limit = 10
>>>>configUniTaggingMode(instanceId=101,tagmode=2)

actionProcess_thread: msgrcv msg pointer adress 0x6824c0
processAction:action type=108,messages still in queue=-1,totalMsgCounter=12
start @ 4m:27s 82ms
configUniAction(portId=101,mode=2)
calling set_to_default for GatewayUniSupp1
Inside configLtpPonLossBehavior instance id 257 and mode 1
>>>>configUniDot1xParams(portId=101,dot1x_enable=0,action_register=3)
Tr069MgmtServerItf:: set_to_default_spl()
processAction: result is: SUCCESS
end @ 4m:27s 89ms

actionProcess_thread: msgrcv msg pointer adress 0x6824c0
processAction:action type=220,messages still in queue=0,totalMsgCounter=14
start @ 4m:27s 90ms
>>>>configUniDot1xParamsAction(portId=101,dot1x_enable=0,action_register=3)
processAction: result is: SUCCESS
end @ 4m:27s 91ms
Tr069MgmtServerItf:: set_to_default():Instance found
GatewayUniSupp_1::set_to_default_spl() has failed; GatewayUNI_Supp_1 instance(0x0e01) not found
>>>>>>>>configRateLimit protocol = 1, rate_limit = 10
>>>>>>>>configRateLimit protocol = 2, rate_limit = 10
>>>>configUniTaggingMode(instanceId=e01,tagmode=2)

actionProcess_thread: msgrcv msg pointer adress 0x6824c0
processAction:action type=108,messages still in queue=-1,totalMsgCounter=14
start @ 4m:27s 94ms
configUniAction(portId=e01,mode=2)
OMCIItf: Mib Interface: 6  start reset time@04m:27s:099ms

OMCIItf: Mib Interface: 7  start reset time@04m:27s:099ms

OMCIItf: Mib Interface: 8  start reset time@04m:27s:100ms

OMCIItf: Mib Interface: 9  start reset time@04m:27s:100ms

processAction: result is: SUCCESS
end @ 4m:27s 100ms
OMCIItf: Mib Interface: 10  start reset time@04m:27s:100ms

OMCIItf: Mib Interface: 11  start reset time@04m:27s:101ms

OMCIItf: Mib Interface: 12  start reset time@04m:27s:102ms

OMCIItf: Mib Interface: 13  start reset time@04m:27s:103ms

OMCIItf: Mib Interface: 14  start reset time@04m:27s:103ms

OMCIItf: Mib Interface: 15  start reset time@04m:27s:103ms

OMCIItf: Mib Interface: 16  start reset time@04m:27s:104ms

OMCIItf: Mib Interface: 17  start reset time@04m:27s:104ms

OMCIItf: Mib Interface: 18  start reset time@04m:27s:105ms

OMCIItf: Mib Interface: 19  start reset time@04m:27s:106ms

OMCIItf: Mib Interface: 20  start reset time@04m:27s:106ms

OMCIItf: Mib Interface: 21  start reset time@04m:27s:106ms

OMCIItf: Mib Interface: 22  start reset time@04m:27s:107ms

OMCIItf: Mib Interface: 23  start reset time@04m:27s:107ms

OMCIItf: Mib Interface: 24  start reset time@04m:27s:108ms

OMCIItf: Mib Interface: 25  start reset time@04m:27s:108ms

OMCIItf: Mib Interface: 26  start reset time@04m:27s:109ms

OMCIItf: Mib Interface: 27  start reset time@04m:27s:109ms

OMCIItf: Mib Interface: 28  start reset time@04m:27s:109ms

OMCIItf: Mib Interface: 29  start reset time@04m:27s:110ms

OMCIItf: Mib Interface: 30  start reset time@04m:27s:110ms

OMCIItf: Mib Interface: 31  start reset time@04m:27s:111ms

OMCIItf: Mib Interface: 32  start reset time@04m:27s:111ms

OMCIItf: Mib Interface: 33  start reset time@04m:27s:111ms

OMCIItf: Mib Interface: 34  start reset time@04m:27s:112ms

OMCIItf: Mib Interface: 35  start reset time@04m:27s:112ms

OMCIItf: Mib Interface: 36  start reset time@04m:27s:113ms

HpnaUniPptpItf: set_to_default() not supported for HpnaUniPptp Me; instead use set_to_default_spl();
OMCIItf: Mib Interface: 37  start reset time@04m:27s:113ms

OMCIItf: Mib Interface: 42  start reset time@04m:27s:114ms

>>>>sendPwrSheddingDatatoApp
[OMCI-PORTMGR] send_msg_to_portmgr ...............msgType is <a0004>
OMCIItf: Mib Interface: 43  start reset time@04m:27s:115ms

OMCIItf: Mib Interface: 44  start reset time@04m:27s:116ms

OMCIItf: Mib Interface: 45  start reset time@04m:27s:116ms

OMCIItf: Mib Interface: 46  start reset time@04m:27s:116ms

OMCIItf: Mib Interface: 47  start reset time@04m:27s:117ms

OMCIItf: Mib Interface: 48  start reset time@04m:27s:117ms

OMCIItf: Mib Interface: 49  start reset time@04m:27s:118ms

OMCIItf: Mib Interface: 50  start reset time@04m:27s:118ms

OMCIItf: Mib Interface: 51  start reset time@04m:27s:119ms

OMCIItf: Mib Interface: 52  start reset time@04m:27s:119ms

OMCIItf: Mib Interface: 53  start reset time@04m:27s:119ms

OMCIItf: Mib Interface: 54  start reset time@04m:27s:120ms

OMCIItf: Mib Interface: 55  start reset time@04m:27s:120ms

OMCIItf: Mib Interface: 56  start reset time@04m:27s:121ms

OMCIItf: Mib Interface: 57  start reset time@04m:27s:121ms

OMCIItf: Mib Interface: 58  start reset time@04m:27s:122ms

>>>>configUniTaggingMode(instanceId=101,tagmode=2)

actionProcess_thread: msgrcv msg pointer adress 0x6824c0
processAction:action type=108,messages still in queue=-1,totalMsgCounter=15
start @ 4m:27s 122ms
configUniAction(portId=101,mode=2)
>>>>configUniTaggingMode(instanceId=e01,tagmode=2)
OMCIItf: Mib Interface: 59  start reset time@04m:27s:127ms

OMCIItf: Mib Interface: 76  start reset time@04m:27s:128ms

OMCIItf: Mib Interface: 77  start reset time@04m:27s:128ms

processAction: result is: SUCCESS
end @ 4m:27s 128ms

actionProcess_thread: msgrcv msg pointer adress 0x6824c0
processAction:action type=108,messages still in queue=0,totalMsgCounter=17
start @ 4m:27s 129ms
configUniAction(portId=e01,mode=2)
OMCIItf: Mib Interface: 78  start reset time@04m:27s:128ms

OMCIItf: Mib Interface: 79  start reset time@04m:27s:134ms

OMCIItf: Mib Interface: 80  start reset time@04m:27s:135ms

>>>>>>>>ipHostApi.cc::deleteIPHost::40
OMCIItf: Mib Interface: 81  start reset time@04m:27s:135ms

OMCIItf: Mib Interface: 82  start reset time@04m:27s:136ms

OMCIItf: Mib Interface: 83  start reset time@04m:27s:136ms

processAction: result is: SUCCESS
end @ 4m:27s 136ms

actionProcess_thread: msgrcv msg pointer adress 0x6824c0
processAction:action type=103,messages still in queue=0,totalMsgCounter=18
start @ 4m:27s 137ms
>>>>>>>>ipHostService.cc::deleteIPHostAction::212 iphostID=0,g_sig_dscp=255,g_rtp_dscp=255
processAction: result is: SUCCESS
end @ 4m:27s 138ms
OMCIItf: Mib Interface: 84  start reset time@04m:27s:139ms

OMCIItf: Mib Interface: 85  start reset time@04m:27s:139ms

MIB RESET: set_to_default done
OmciMain:: Response Msg Sent--@04m:27s:140ms

OmciMain:: Received MSG_N_OMCI_GET:Entity_id(131-00);instance_id(0x0000)--@04m:27s:140ms

RX_ONT_MSG -- @04m:27s:140ms
Msg_type    = GET RESPONSE
Trans_id    = 03
Entity_id   =  OLT G
Instance_id = 00
Sub entity Id :NO SUB ENTITY ID
Result_reason = COMMAND_PROCESSED_SUCCESSFULLY
olt_vendor_id.status = VALID
olt_vendor_id.value =
OmciMain:: Response Msg Sent--@04m:27s:145ms

eqpt_id.status = NOT VALID
olt_version.status = NOT VALID
time_of_day_info.status = NOT VALID
Duration : 00s:638ms
OMCI msg construction = SUCCESSFUL

TX_OMCI_MSG
bytes[06-13]: 28  42  29  0a  00  83  00  00
bytes[14-45]: 00  80  00  20  20  20  20  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00 -
OMCI_TX#   3@   4m:27s: 147ms-28 42 29 0A 00 83 00 00 00 80 00 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
OMCI_RX#   4@   4m:27s: 150ms-28 43 4D 0A 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 28 75 F1 6E 2F



RX_OMCI_MSG
bytes[06-13]: 28  43  4d  0a  00  02  00  00
bytes[14-45]: 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00 -
SYNTAX CHECK RESULT = SUCCESSFUL.


OmciMain::Received MSG_OMCI_MIB_UPLOAD--@04m:27s:155ms

TX_ONT_MSG -- @04m:27s:156ms
Msg_type    = MIB UPLOAD
Trans_id    = 04
Entity_id   = ONT DATA
Instance_id = 00
LIB_ONT_DATA Total number of Interface: 36 is NULL
OntData::676::mib_upload_array_p addr is 0x6824c0 index=0
LIB_ONT_DATA Interafce accessed is 0
LIB_ONT_DATA Interafce accessed is 1
LIB_ONT_DATA Interafce accessed is 2
LIB_ONT_DATA Interafce accessed is 3
LIB_ONT_DATA Interafce accessed is 4
LIB_ONT_DATA Interafce accessed is 5
LIB_ONT_DATA Interafce accessed is 6
LIB_ONT_DATA Interafce accessed is 7
LIB_ONT_DATA Interafce accessed is 8
LIB_ONT_DATA Interafce accessed is 9
Error: latch_mib(); is not supported for NtpConfigurationItf ME;
LIB_ONT_DATA Interafce accessed is 10
LIB_ONT_DATA Interafce accessed is 11
LIB_ONT_DATA Interafce accessed is 12
LIB_ONT_DATA Interafce accessed is 13
LIB_ONT_DATA Interafce accessed is 14
LIB_ONT_DATA Interafce accessed is 15
LIB_ONT_DATA Interafce accessed is 16
LIB_LanUniPptpItf ME;
   LIB_LanUniPptpItf ME Loop;
LIB_ONT_DATA Interafce accessed is 17
LIB_ONT_DATA Interafce accessed is 18
LIB_ONT_DATA Interafce accessed is 19
LIB_ONT_DATA Interafce accessed is 20
LIB_HpnaUniPptp ME;
LIB_ONT_DATA Interafce accessed is 21
LIB_VeipItf ME;
   LIB_VeipItf ME Loop;
LIB_ONT_DATA Interafce accessed is 22
LIB_ONT_DATA Interafce accessed is 23
LIB_ONT_DATA Interafce accessed is 24
OntData::mib_upload(); Mib Interface: 25 is NULL
OntData::mib_upload(); Mib Interface: 26 is NULL
LIB_ONT_DATA Interafce accessed is 27
LIB_ONT_DATA Interafce accessclient_loop:

Slothy · « **Réponse #123 le:** 02 avril 2021 à 00:00:18 »

Salut,
Tu as la même config que moi (G-010S-A et N1524) et le même problème. On est plusieurs à bloquer à cette étape, probablement un problème de paramétrage poussé par l'OLT (VLAN etc).

njd90 · « **Réponse #124 le:** 03 avril 2021 à 17:23:01 »

Quelqu'un a essayé avec un G-010S-P ?

monoeilouais · « **Réponse #125 le:** 03 avril 2021 à 21:47:39 »

Hello
Je viens d'en recevoir un et je teste.
Je suis O5 mais pas d'IP.
Je suis en train de voir pour le flasher avec l'image carlitoxx

monoeilouais · « **Réponse #126 le:** 04 avril 2021 à 23:20:22 »

ça y est, mon G-010S-P est flashé avec Carlitoxx v1 !
Je suis à nouveau O5 mais sans IP.
Par contre, je ne perds pas l'accès.
Je vois qu'il y a plein d'options mais je ne comprends pas tout...

Christoto · « **Réponse #127 le:** 24 mai 2021 à 17:37:51 »

Bonjour,

Je suis chez BT et je souhaite remplacer la bbox Fast 5688b comme suit :
SCAPC --> G 010S A --> ES16XG --> UDM PRO (Je me suis inspiré de la réussite de florian)

Autant prévenir Je ne suis pas un pro du réseau mais les diverses lectures sur ce forum aussi bien dans l’univers BT qu’Orange sont une véritable mine d’or et m’ont appris énormément car je pars de quasi 0 (juste de la débrouille et du bricolage 😊 ).

Juste vs me pardonnerez si j’ai loupé un truc car ttes les infos engrangées ont plutôt tendance à se mélanger là-haut 😊

Enfin je me suis donc équipé en conséquence (non mais !!! un noob qui veut du pro  sortez le 😊) et tenté de suivre les tutos, mais là je bloque sur l’ont G-010S-A :

Il oscille en current_state entre 02 et 05

(j’ai lu le guide de Gnubyte qui a fait un boulot hors norme
https://lafibre.info/remplacer-livebox/guide-de-connexion-fibre-directement-sur-un-routeur-voire-meme-en-2gbps/
Et les liens associés
https://forum.huawei.com/carrier/en/thread-446043-1-1.html
, mais cela reste un peu de haut niveau pour moi), j’en déduirais tout de même que cet état dépendrais peut être de la compatibilité avec l’OLT……. ou peut-être des SLID, ID, ou SN que j’ai mal renseigné)

Donc voilà ce que j’ai renseigné sur le G-010S-A :

Via l'interface http :
Enregistrement du SLID : (00000 + imei) --> imei récupéré sur l'étiquette de la BBOX (15chiffres)
quand je me relogg en http je retrouve bien mon (00000 + imei)

Via l'interface SSH du G010S A:
Enregistrement du ID et SN (SMBSxxxxxxxx)
ritool set MfrID SMBS --> 4 premiers caractères du SN lu sur l'interface de la BBOX et rentré tel-quel
ritool set G984Serial 12345678 --> 8 derniers chiffres du SN lu sur l'interface de la BBOX et rentré tel-quel

relecture sur l'onu tjrs via ssh:
ONTUSER@SFP:~# onu gtcsng
errorcode=0 serial_number="83 xx xx xx 2 xx xx 223"

Ré-enregistrement du PLOAM password (SLID)
Uci set gpon.ploam.nPassword=’0x30 0x30 …….. ‘ correspondant aux 20 chiffres (00000 + imei) à savoir si j’ai bien traduit tout ça ….. exemple pour un chiffre 9 = 0x39……. et c……

relecture sur l'onu tjrs via ssh:
ONTUSER@SFP:~# onu gtccg
errorcode=0 bip_error_interval=4095 sf_threshold=5 sd_threshold=9
serial_number_request_threshold=10 rogue_msg_id_upstream_reset=255
rogue_msg_repeat_upstream_reset=3 rogue_msg_id_device_reset=255
rogue_msg_repeat_device_reset=3 rogue_msg_enable=0
ploam_timeout_1=11000 ploam_timeout_2=100 emergency_stop_state=0
password="48 48 48 48 48 48 48 48 48 48"

Je n'ai pas rentré l @ mac de la BBOX……..

Les autres données que j’ai réussi à obtenir sur l’ont sont les suivantes :

Code: [Sélectionner]

---------------------------------------------------------------------
Lantiq GPON Evaluation System (SFP), Image Revision 7.5.3
----------------------------------------------------------------------
IFXOS, Version 1.6.6
FALC(tm) ON Base Driver, Version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
FALC(tm) ON Optic Driver, version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
/opt/lantiq/bin/show_version.sh: line 21: OperatorID: not found
GPON ONU control, version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
GPON Optic Control, version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
GPON ONU top, version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
OMCI Simulate, version 7.5.1 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
OMCI daemon, version 7.5.1 (c) Copyright 2015, Lantiq Beteiligungs-GmbH Co. KG
GPON Optic top, version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
GPON Optic Calibration CLI, version 7.5.1 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
GPON Exception Dump Tool, version 7.5.1.0 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG
OMCI usock server, version 7.5.1 (c) Copyright 2015, Lantiq Beteiligungs-GmbH & Co. KG

ONTUSER@SFP:~# cat /usr/etc/buildinfo
ONT_TYPE=g010sa
PON_MODE=GPON
SOFTWAREVERSION=BFG.A06p02
PRODUCTCLASS=g010sa
RELEASE=0.0.0
BUILDSTAMP=
BUILDDATE=20170407_1757
COPYRIGHT=ASB
WHOBUILD=buildmgr
IMAGEVERSION=3FE46398BFGA06
VOIP=
CONFIG_VOIP_SW=
LATEST_REV=18511
REPO=sw
SIGN=n

Pour le 2.5gb/s : C’est OK sur l’interface de l’ES16XG
Je découvre il y a qqs instants dans l’interface web de la BBOX dans l’onglet fibre que l’OLT est HWTC donc au final je me pose la question de savoir si l’ont G-010S-A est bien compatible avec cet OLT ? ce qui expliquerait ce qui est dit plus haut

Enfin voilà ou j’en suis mais je tourne en boucle, un peu d’aide serait la bienvenue et super sympa de votre part ou du moins me ré aiguiller sur la bonne voie ou me dire quel matériel aurait le plus de succès......
Je tenterais bien le 18 mais je ne sais pas si ça serait apprécié 😊

D’avance merci
a+++

AlainDeloin31 · « **Réponse #128 le:** 24 mai 2021 à 17:58:03 »

Ma réponse ne va sans doute pas t'aider, mais tout comme toi, j'avais testé en fin d'année dernière de remplacer ma Bbox Ultym avec un ONU G-010S-A + Mikrotik, sans succès.
L'ONU montait en O5 et retombait en O2 en boucle. Et tout comme toi, j'ai un OLT Huawei en face. J'en étais arrivé au même point que toi, à me demander si c'était un problème de compatibilité ONU/OLT.
J'espère que tu arriveras à avoir plus de réponses que moi...

hwti · « **Réponse #129 le:** 24 mai 2021 à 18:18:30 »

Citation de: Christoto le 24 mai 2021 à 17:37:51

Via l'interface http :
Enregistrement du SLID : (00000 + imei) --> imei récupéré sur l'étiquette de la BBOX (15chiffres)
quand je me relogg en http je retrouve bien mon (00000 + imei)
...
Via l'interface SSH du G010S A:
Ré-enregistrement du PLOAM password (SLID)
Uci set gpon.ploam.nPassword=’0x30 0x30 …….. ‘ correspondant aux 20 chiffres (00000 + imei) à savoir si j’ai bien traduit tout ça ….. exemple pour un chiffre 9 = 0x39……. et c……

relecture sur l'onu tjrs via ssh:
ONTUSER@SFP:~# onu gtccg
errorcode=0 bip_error_interval=4095 sf_threshold=5 sd_threshold=9
serial_number_request_threshold=10 rogue_msg_id_upstream_reset=255
rogue_msg_repeat_upstream_reset=3 rogue_msg_id_device_reset=255
rogue_msg_repeat_device_reset=3 rogue_msg_enable=0
ploam_timeout_1=11000 ploam_timeout_2=100 emergency_stop_state=0
password="48 48 48 48 48 48 48 48 48 48"

Le gpon.ploam.nPassword ne sert en fait à rien, le SLID renseigné dans l'interface web devrait s'appliquer immédiatement (sans avoir à faire de reboot), mais ce n'est pas le cas (password="48 48 48 48 48 48 48 48 48 48" => 0000000000).
Est-ce que tu as choisi le bon mode pour le SLID ? 20 chiffres c'est le mode hexa.
Tu peux vérifier ce qui a été rengistré avec "cat /configs/cfg.conf".

Citation de: Christoto le 24 mai 2021 à 17:37:51

Je découvre il y a qqs instants dans l’interface web de la BBOX dans l’onglet fibre que l’OLT est HWTC donc au final je me pose la question de savoir si l’ont G-010S-A est bien compatible avec cet OLT ? ce qui expliquerait ce qui est dit plus haut

Les problèmes avec HWTC n'empêchent pas de passer en O5 normalement.

Christoto · « **Réponse #130 le:** 24 mai 2021 à 19:11:02 »

Bonjour et super merci pour vos retours,

Voici ce que j ai avec cat /configs/cfg.conf :

login as: ONTUSER
ONTUSER@192.168.1.10's password:

BusyBox v1.22.1 (2017-04-07 18:15:09 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

OpenWrt - (14.07_ltq) --- Lantiq Edition for GPON
----------------------------------------------
ONTUSER@SFP:~# cat /configs/cfg.conf
[MgntUserName]
Value= adminadmin
[MgntUserPassword]
Value=Txxxxxx
[SLID]
Value=00000xxxxxxxxxxx8399
[SLIDMode]
Value=1
[WebPasswordTip]
Value=FF14
ONTUSER@SFP:~# login as: ONTUSER
[MgntUserName]
Value= adminadmin
[MgntUserPassword]
Value=Txxxxxx
[SLID]
Value=00000xxxxxxxxxxx8399
[SLIDMode]
Value=1
[WebPasswordTip]
Value=FF14
ONTUSER@SFP:~#
Password:
Login incorrect
SFP login:
Login timed out after 60 seconds
ONTUSER@SFP:~#

aprés au final je sais pas si avec la commande onu gtccg ca donne reellement l'imei les 48 48 et si c est pas crypté
sinon sur l interface http je retrouve bien cet IMEI je l'avais rentré avec le sous menu hexa et simplement les 20chiffres

Christoto · « **Réponse #131 le:** 24 mai 2021 à 19:16:19 »

Aprés je vais re relire car je crois que tu avais fait deja un sujet super complet sur les ont et compatibilités........ (mais bon ca fait bcp d'infos sur différents posts en peu de temps pour moi je mélange tout

)
dans tous les cas merci bcp