Auteur Sujet: Routeur SFP pour remplacer bbox fibre + ONT  (Lu 81030 fois)

0 Membres et 1 Invité sur ce sujet

Slothy

  • Abonné Bbox fibre
  • *
  • Messages: 1 169
  • 2x FTTH 1 Gb/s sur Le Plessis-Trévise (94)
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #48 le: 25 novembre 2020 à 20:18:03 »
Alors pas besoin du point de soudure dans un switch Aruba, un switch Dell et un pare-feu Fortigate.

Mon but n'est pas d'avoir du 2,5G mais de pouvoir remplacer l'ONT. Notamment pour avoir un cluster de pare-feu avec un brin par noeud (oui ça pourrait arriver sur un switch en amont, mais c'est bof), un peu comme si j'avais un ONT à 2 ports. Je l'ai déjà fait sur des FTTO avec un media converter à 2 ports de FS.

Slothy

  • Abonné Bbox fibre
  • *
  • Messages: 1 169
  • 2x FTTH 1 Gb/s sur Le Plessis-Trévise (94)
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #49 le: 25 novembre 2020 à 22:05:31 »
Bon, j'ai réessayé mon G-010S-A avec Bouygues, je suis O5 comme d'hab mais pas de trafic. J'ai mis l'IMEI en SLID (avec 5 0 devant) et la MAC, par contre le S/N je vois pas comment, j'ai un ONT externe et il commence par 485754.... donc on est pas dans le code opérateur qu'il attend.

Citer
Every 1s: onu ploamsg                                       1970-01-01 00:12:18

errorcode=0 curr_state=5 previous_state=4 elapsed_msec=227540

Mon omci.log dit qu'il est content, jusqu'au moment ou il ne l'est plus, mais je comprend pas trop (quelques valeurs sont masquées) :

ONTUSER@SFP:~# cat /tmp/omci.log
OMCI_LIB: Parser:Running in background
isInitializedParser()
hi_ploam_init succeeded, error = 0x00000000
InitializeOmciMgr
OperatorId=ALCL
/configs/oltInfo not exist
setDynamicTpidFlag,isDynamicTpic=0
VNPT unlock proposal should not take effect.
ethConfig() onu_mode = 1
********OMCI Config Data Begin****************
****ONU Type    : 0
****onu mode    : 1
****max lan num : 1
****max wifi num: 0
****max wifi id start: 1
****check wifi state: no
****port 0 config by omci: 1
****dscp to Pbit for untag Config By OMCI: yes
****support double tag rules us: yes
****support double tag rules ds: yes
****support pbit Unmatch Rules: yes
****support Bcast Unmatch Rules: no
****support omci manage HGU port: no
****HGU single port=false
****support omci replace after ranging : no
****support Dynamic Tpid : no
****support Cox : no
****factory mode: 0
********OMCI Config Data End****************
   user_port    class       domain
===================================
      1          ETH         SFU
===================================
stub function only for build
stub function only for build
registTimerEvent,Line:277.
registTimerEvent,Line:283.timerId=0,intervalMs=300000.
registTimerEvent,Line:277.
registTimerEvent,Line:283.timerId=1,intervalMs=1000.
write to /configs/omciMsgFileID.txt failed
registTimerEvent,Line:277.
registTimerEvent,Line:283.timerId=2,intervalMs=0.
OMCI_LIB: Parser: isInitializedParser returned true
OMCI_LIB: Parser:Queue Created
InitPortStream() maxPort=1, enet=1,moca=0
InitPortStream:: ONU type is SFU
---get_port_info_by_id---user_port:1,port_info:1,0,0
>>>>>>>>printThresh
       ponRxHighThresh       = -7.958800
       ponRxLowThresh        = -28.386320
       ponTxHighThresh       = 5.051500
       ponTxLowThresh        = 0.499928
       ponBiasHighThresh     = 40.000000
       ponBiasLowThresh      = 2.800000
       ponTempLowThresh      = -40.000000
       ponTempHighThresh     = 85.000000
       ponVolHighThresh      = 3.465000
       ponVolLowThresh       = 3.135000
       ponTempLowWarnThresh  = -40.000000
       ponTempHighWarnThresh = 85.000000
       ponVolHighWarnThresh  = 3.465000
       ponVolLowWarnThresh   = 3.135000
       ponBiasHighWarnThresh = 0.000000
       ponBiasLowWarnThresh  = 0.000000
       ponRxHighWarnThresh   = 0.000000
       ponRxlLowWarnThresh   = 0.000000
       ponTxHighWarnThresh   = 0.000000
       ponTxLowWarnThresh         = 0.000000

main: msgget action_process qid failed, err = 2, No such file or directory

main: msgget action_process qid failed, err = 2, No such file or directory
 set_port_num_for_portmgr .......ethport<1> <0> cesport<0> dslport<0> voiceport<0> videoport<0>
[OMCI-PORTMGR] send_msg_to_portmgr ...............msgType is <a0003>
reset_all_tsched ...
registTimerEvent,Line:277.
registTimerEvent,Line:283.timerId=0,intervalMs=500.
registTimerEvent,Line:277.
registTimerEvent,Line:283.timerId=1,intervalMs=3000.
registTimerEvent,Line:277.
registTimerEvent,Line:283.timerId=2,intervalMs=1500.
registTimerEvent,Line:277.
registTimerEvent,Line:283.timerId=3,intervalMs=100000.
PortPmHandler registered
PortPmHandler registered
PortPmHandler registered
PortPmHandler registered
PortPmHandler registered
PortPmHandler registered
PortPmHandler registered
create_actionProcess_thread id = 1996420384
registTimerEvent,Line:277.
registTimerEvent,Line:283.timerId=4,intervalMs=10000.
 In deleteAllFlowInDataModel
>>>>>>>>isEnableOmciQOSConf  get ONTOMCIQOSInfoObject info is false!
actionProcess_thread pid = 1524
initialize loid ...
evtNotifyHandleFunInit ...
evtNotifyHandleFunInit  thread id = 1994323232
CfgmgrevtNotifyHandleFunInit ...
CfgmgrevtNotifyHandleFunInit  thread id = 1992226080
isOnuTimeEnable ...
>>>>>>>>getMaxGroupValue
>>>>>>>>IgmpMaxGroups::1024
Error: OmciMain failed to get the EfmOAM Process qid.
configMcastFlow ...
evtNotifyHandle pid = 1524
getEvtMsgHandle:74::msghandle = 0xc80ca8.msghandle->commFd=10.
The commFd = 10
/configs/oltInfo not exist
OMCI_LIB:Mgr: InitializeOmciMgr returned
>>>>>>>ReadCapabilityFromApp<<<<<<<<<
>>>>>>>getOntCapability<<<<<<<<<
>>>>>>>>setCardType, card id = 14, type = 48
>>>>>>>>setCardType, card id = 1, type = 24
NON-VEIP_PORT found
OMCI_LIB: Info: Max simultaneous groups : 1024
OMCI_LIB: >>>>>>>>>>> ONT Capability <<<<<<<<<<<<
   ONT Type           :(2)
   VOIP Type          :(1)
    INTEGRATED_ONT     :(1)
    OMCC_VERSION       :(134)
    CUSTOMER ID        :(0)
    Number of cards    :(2)
   Number of eth Ports :(1)
   Card Number     :0
    0)Card Type          :48
    0)Slot IDpe          :14
    0)Number of ports    :1
   Card Number     :1
    1)Card Type          :24
    1)Slot IDpe          :1
    1)Number of ports    :1
   Total Number of Ports :(2)
   Port Number     :0
    0)portType           :7
    0)Slot ID            :14
    0)Port ID            :1
    0)Mgmt Capability    :0
    0)VEIP SLOT ID       :0
    0)VEIP PORT ID       :0
   Port Number     :1
    1)portType           :2
    1)Slot ID            :1
    1)Port ID            :1
    1)Mgmt Capability    :0
    1)VEIP SLOT ID       :0
    1)VEIP PORT ID       :0
OMCI_LIB: >>>>>>>>>>>End of ONT Capability <<<<<<<<<<<<
/configs/zeroman/imageCounter not exist
getImageNumber ,imgcount = 2.
>>>>getSwVerInfo(),imageBank:0,version:3FE46398AFGB89
OMCI_LIB: OmciMain:: Calling getSwImageInfo()call getSwImageInfo:Line:255.
call special_process_depended_board:Line:202.
special_process_depended_board:exit.
call special_process_depended_board:Line:202.
special_process_depended_board: call swdl_commit.
>>>>configLptPort: onu state is ONU_LOS_LOF

actionProcess_thread: msgrcv msg pointer adress 0xc7f4f0
processAction:action type=116,messages still in queue=-1,totalMsgCounter=0
start @ 0m:59s 641ms
processAction: result is: SUCCESS
end @ 0m:59s 642ms
checkPonLEDStatus:Fiber disconnected
special_process_depended_board:exit.
getSwImageInfo:exit.
OMCI_LIB: OmciMain:: got 'ONU_SWIMAGE_INFO' with value 0x1e
>>>>getSwVerInfo(),imageBank:1,version:3FE46398AFGB89
read_sn_from_RI sn is: PTINffffff91
getOmciOntvalues: Serial_Number = PTIN:ffffff91xxxxffffffd3
getOmciOntvalues: YP_Serial_Num = PTIN91xxxxD3
getOmciOntvalues: vendor_id = PTIN
getOmciOntvalues: HardwareVersion = 3FE46541AAAA
getOmciOntvalues: ICS = 01
getOmciOntvalues: MACAddress = 60:2e:20:10:xx:xx
getOmciOntvalues: Factorycode = 08
getOmciOntvalues: original RI cleicode = BVL3A8JNAA, length = 10
getOmciOntvalues: Mnemonic = G-010S-A
getOmciOntvalues: onu equipid(CleiCode+Mnemonic) = BVL3A8JNAAG010SA
>>>>>>>>getGponConfInfo
        totalTcontNum   = 9
        totalGemPortNum = 254
        totalUSPQNum    = 64
        totalDSPQNum    = 8
        numPqPerTcont   = 8
        numPqPerUni     = 8
        totalTSchedNum  = 8
>>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0
>>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0
>>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0
>>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0
>>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0
>>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0
>>>>>>>>setPktDropPara pktDropMaxP:0, dropPrecColorMark:0
>>>>>>>>getTSchedInfo, tschedId = 0x0, tschedCfg.tschedId = 0x8001
>>>>>>>>getTSchedInfo, tschedId = 0x1, tschedCfg.tschedId = 0x8002
>>>>>>>>getTSchedInfo, tschedId = 0x2, tschedCfg.tschedId = 0x8003
>>>>>>>>getTSchedInfo, tschedId = 0x3, tschedCfg.tschedId = 0x8004
>>>>>>>>getTSchedInfo, tschedId = 0x4, tschedCfg.tschedId = 0x8005
>>>>>>>>getTSchedInfo, tschedId = 0x5, tschedCfg.tschedId = 0x8006
>>>>>>>>getTSchedInfo, tschedId = 0x6, tschedCfg.tschedId = 0x8007
>>>>>>>>getTSchedInfo, tschedId = 0x7, tschedCfg.tschedId = 0x8008
>>>>>>>>getTContInfo, tcontIndex = 0x0, tcontId = 0x8000, policy = 0
>>>>>>>>getTContInfo, tcontIndex = 0x1, tcontId = 0x8001, policy = 1
>>>>>>>>getTContInfo, tcontIndex = 0x2, tcontId = 0x8002, policy = 1
>>>>>>>>getTContInfo, tcontIndex = 0x3, tcontId = 0x8003, policy = 1
>>>>>>>>getTContInfo, tcontIndex = 0x4, tcontId = 0x8004, policy = 1
>>>>>>>>getTContInfo, tcontIndex = 0x5, tcontId = 0x8005, policy = 1
>>>>>>>>getTContInfo, tcontIndex = 0x6, tcontId = 0x8006, policy = 1
>>>>>>>>getTContInfo, tcontIndex = 0x7, tcontId = 0x8007, policy = 1
>>>>>>>>getTContInfo, tcontIndex = 0x8, tcontId = 0x8008, policy = 1
>>>>>>>>getPqWeightInvPolicy
OMCI_LIB:PqWeightInvPolicy value=1
OmciMain:: Creating autonomous ME's.
>>>>>>>>getGponOpticalAttr
getBiasCurrent:: biasCurrent=0.007160
getoptModTemp:: optModTemp=34.849998
getoptModVolt:: optModVolt=3.299988
getOpticalRxSignalLevel:: OpticalRxSignalLevel=-inf
getOpticalRxSignalLevel:: OpticalTxSignalLevel=0.000000
getPonRxLowThresh:: ponLowThresh=-28.386320
getPonRxHighThresh:: ponHighThresh=-7.958800
getPonTxLowThresh:: ponLowThresh=-28.386320
getPonTxHighThresh:: ponHighThresh=-7.958800
>>>>>>>>getLastDsoTime
>>>>>>>>getQosCfgFlexibility
Value of bit position is 5
Inside HguTr069ConfigItf constructor...
Value of bit position is 8
Entering TurboOctetStringItf constructor...
Value of bit position is 9
GemCtpItf:GemCtpItf: maxNumOfInstances=254
>>>>>checkLanState(port:1,original _connect:-1,isConnect:0)
loss_alarm : user_port 1 -> isConnect 0
loss_alarm : send message of AIS [alarmState]=1
omciMgr/lanLossIndiacteToCFM: ERR, send_alarm_msg to cfmoam
Value of bit position is 0
>>>>sendPwrSheddingDatatoApp
[OMCI-PORTMGR] send_msg_to_portmgr ...............msgType is <a0004>
Value of bit position is 13
getLoidAuthInfo() @ 1m:0s:735ms
getLoidAuthInfo() exit @ 1m:0s:744ms, :
>>>>>>>>getTrafficMgmtOption
 - create_instance_auto()  act_plugInUnitType = 48
IN VEIP SubscriberLinecard:index-0
No of ports = 1>>>>configUniTaggingMode(instanceId=e01,tagmode=2)

actionProcess_thread: msgrcv msg pointer adress 0xc83880
processAction:action type=108,messages still in queue=-1,totalMsgCounter=1
start @ 1m:0s 746ms
configUniAction(portId=e01,mode=2)
processAction: result is: SUCCESS
VEIP::(3585) successfully created
create_instance_auto::create Tr069MgmtServer ME
>>>>>>>>configRateLimit protocol = 1, rate_limit = 10
>>>>>>>>configRateLimit protocol = 2, rate_limit = 10
>>>>configUniTaggingMode(instanceId=e01,tagmode=2)
 - create_instance_auto()  act_plugInUnitType = 24
OMCI_LIB: TEN_BASE_T: indexID: 1
ConfigFile3::No of ethernet ports after assignment is :1
 - LanUniPptpItf::create_instance_auto(inst=101,port_type=0)
>>>>getPhyDevConfig(portId=101) @  1: 0:751ms
end @ 1m:0s 747ms

actionProcess_thread: msgrcv msg pointer adress 0xc84ba0
processAction:action type=108,messages still in queue=0,totalMsgCounter=3
start @ 1m:0s 752ms
configUniAction(portId=e01,mode=2)
processAction: result is: SUCCESS
end @ 1m:0s 753ms
portId-101,state=0,confInd=0
getPhyDevConfig() exit @  1: 0:760ms
>>>>getPhyDevConfig(portId=101) @  1: 0:761ms
portId-101,state=0,confInd=0
getPhyDevConfig() exit @  1: 0:762ms
>>>>configUniTaggingMode(instanceId=101,tagmode=2)

actionProcess_thread: msgrcv msg pointer adress 0xc83880
processAction:action type=108,messages still in queue=-1,totalMsgCounter=3
start @ 1m:0s 763ms
configUniAction(portId=101,mode=2)
processAction: result is: SUCCESS
end @ 1m:0s 764ms
LanUniPptpItf::create_instance_auto return result=1
Inside configLtpPonLossBehavior instance id 257 and mode 2
EthSLC:gatewayUniSupp1 with ID=257 create success for Lan Uni ID 257
>>>>>>>>configRateLimit protocol = 1, rate_limit = 10
>>>>>>>>configRateLimit protocol = 2, rate_limit = 10
>>>>configUniTaggingMode(instanceId=101,tagmode=2)
>>>>configUniDot1xParams(portId=101,dot1x_enable=0,action_register=3)
total no of ports in lan sub card 2
TEN_100BT_PORT found with instance id=257---port no=1

actionProcess_thread: msgrcv msg pointer adress 0xc83880
processAction:action type=108,messages still in queue=1,totalMsgCounter=6
start @ 1m:0s 776ms
configUniAction(portId=101,mode=2)
processAction: result is: SUCCESS
end @ 1m:0s 777ms

actionProcess_thread: msgrcv msg pointer adress 0xc83a90
processAction:action type=220,messages still in queue=0,totalMsgCounter=6
start @ 1m:0s 778ms
>>>>configUniDot1xParamsAction(portId=101,dot1x_enable=0,action_register=3)
processAction: result is: SUCCESS
end @ 1m:0s 779ms
lan uni mgmt cap=0
lan uni veipSlotId=0
lan uni veipPortId=0
Entered UNIItf:: create_instance_auto
UNI::UNI:m_mgmt_capability=0--m_nonomci_mgmt_id=0
UNI::constructor:Create instance:Instance-ID:-(0x0101)
uniPptp_p insert() successful
UNI-G auto created for LAN UNI with port num=:1
>>>>>>>>getSysUpTime
>>>>>>>>getSysUpTime
>>>>>>>>getOnuConnCapability
ONT2Gpon::Going to set the DEAFULT_BRIDGING_MODE
>>>>>>>>setOnuConnMode, mode = 5

actionProcess_thread: msgrcv msg pointer adress 0xc839a0
processAction:action type=222,messages still in queue=-1,totalMsgCounter=6
start @ 1m:0s 799ms
processAction: result is: FAILED
end @ 1m:0s 808ms
>>>>>>>>getQosCfgFlexibility
>>>>>>>>getTrafficMgmtOption
Inside IpHostConfig::IpHostConfig--instancd id=0
getLoidAuthInfo() @ 1m:0s:811ms
getLoidAuthInfo() exit @ 1m:0s:811ms, :
>>>>>>>>getOnuTxPwrSupplyCtrl
omciMgr is running!!!
Evtmgr process not exist! notify_evtMgr_lan_status() return!
msgsnd succeeded
OmciMain:: Received LAN_ALARM--@01m:00s:907ms
LAN_ALARM:alarm_id=70--instance id=257--alarmstate=1--numofethports=1
OmciMain:: Response Msg Sent--@01m:00s:908ms

call getSwImageInfo:Line:255.
call special_process_depended_board:Line:202.
/configs/oltInfo not exist
special_process_depended_board:exit.
call special_process_depended_board:Line:202.
special_process_depended_board: call swdl_commit.
special_process_depended_board:exit.
getSwImageInfo:exit.
OMCI_LIB: Got swImageInfo = 1e, standby = 0
call getSwImageInfo:Line:255.
call special_process_depended_board:Line:202.
call special_process_depended_board:Line:202.
getSwImageInfo:exit.
OMCI_LIB: Got swImageInfo = 0, standby = 3
call getSwImageInfo:Line:255.
call special_process_depended_board:Line:202.
call special_process_depended_board:Line:202.
getSwImageInfo:exit.
OMCI_LIB: Got swImageInfo = 0, standby = 5
OMCI_LIB:Parser:DownloadInit complete
OMCI_LIB: Parser Running
rangingEnable.
read_sn_from_RI sn is: PTINffffff91
>>>>>checkLanState(port:1,original _connect:0,isConnect:1)
loss_alarm : user_port 1 -> isConnect 1
loss_alarm : send message of AIS [alarmState]=0
omciMgr/lanLossIndiacteToCFM: ERR, send_alarm_msg to cfmoam
Evtmgr process not exist! notify_evtMgr_lan_status() return!
OmciMain:: Received LAN_ALARM--@01m:03s:929ms
LAN_ALARM:alarm_id=70--instance id=257--alarmstate=0--numofethports=1
OmciMain:: Response Msg Sent--@01m:03s:929ms

msgsnd succeeded
>>>>>checkLanState(Current Online port:0,Previous Online Port:65535)
updateDownstreamFlow:currentOnPort(0),savedPrePort(65535)!!

actionProcess_thread: msgrcv msg pointer adress 0xc80cc0
processAction:action type=11,messages still in queue=-1,totalMsgCounter=7
start @ 1m:3s 933ms
configVeipFlowsonEthPort: portId:257.
processAction: result is: SUCCESS
end @ 1m:3s 934ms
>>>>>>>>activeGponAlarm: alarmId   = 63
msgsnd succeeded
>>>>>>>>trigger signal low alarm ,cur_value=-inf,alarmThresh=-28.386320,warnThresh=-27.000000,allowedness=0.500000.
alarmactived=1,warnactived=0,lastalarmactived=0,lastwarnactived=0,alarmcounter=0.
OmciMain:: Received GPON_MAC_ALARM--@01m:05s:601ms
GPON_MAC_ALARM:alarm_id=63--instance id=0--alarmstate=1
OmciMain:: Response Msg Sent--@01m:05s:601ms


RX_ONT_MSG -- @01m:05s:606ms
Msg_type    = ALARM
Trans_id    = 00
Alarm seq nbr = 01
Entity_id   = ANI_G
Instance_id = 8001
Alarm mask = 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
OMCI msg construction = SUCCESSFUL

TX_OMCI_MSG
bytes[06-13]: 00  00  10  0a  01  07  80  01
bytes[14-45]: 80  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  01 -
OMCI_TX#   1@   1m: 5s: 625ms-00 00 10 0A 01 07 80 01 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
SendMsgToSlid: msgget failed, err = 2, No such file or directory
Enter notify_sipw_pon_status, onustate=2
>>>>>>>>deActiveGponAlarm: alarmId   = 63
OmciMain:: Received GPON_MAC_ALARM--@08m:46s:274ms
GPON_MAC_ALARM:alarm_id=63--instance id=0--alarmstate=0
OmciMain:: Response Msg Sent--@08m:46s:275ms


RX_ONT_MSG -- @08m:46s:275ms
Msg_type    = ALARM
Trans_id    = 00
Alarm seq nbr = 02
msgsnd succeeded
>>>>>>>>deative signal low alarm ,cur_value=-16.799179,alarmThresh=-28.386320,warnThresh=-27.000000,allowedness=0.500000.
Entity_id   = ANI_G
Instance_id = 8001
Alarm mask = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
OMCI msg construction = SUCCESSFUL

TX_OMCI_MSG
bytes[06-13]: 00  00  10  0a  01  07  80  01
bytes[14-45]: 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  00  00
            : 00  00  00  00  00  00  00  00  00  02 -
OMCI_TX#   2@   8m:46s: 292ms-00 00 10 0A 01 07 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02
checkPonVidStatus: statePrevious=0, state=1
OmciMain:: OMCI Link Status is UP--@08m:47s:929ms
OmciMain:: Response Msg Sent--@08m:47s:929ms

>>>>configAllEthPortDownUp

actionProcess_thread: msgrcv msg pointer adress 0xc80cc0
processAction:action type=233,messages still in queue=-1,totalMsgCounter=8
start @ 8m:47s 933ms
>>>>configAllEthPortDownUpAction
SendMsgToSlid: msgget failed, err = 2, No such file or directory
Enter notify_sipw_pon_status, onustate=3
notify_sipw_pon_status: get SIPW queue failed, err = 2, No such file or directory
>>>>configLptPort: onu state is ONU_REGISTERED
checkPonLEDStatus:Fiber connected
Evtmgr process not exist! notify_evtmgr_pon_status() return!
processAction: result is: SUCCESS
end @ 8m:48s 19ms

actionProcess_thread: msgrcv msg pointer adress 0xc80cc0
processAction:action type=116,messages still in queue=0,totalMsgCounter=10
start @ 8m:48s 28ms
processAction: result is: SUCCESS
end @ 8m:48s 28ms
ONTUSER@SFP:~#

mirtouf

  • Abonné Bbox fibre
  • *
  • Messages: 1 297
  • Chelles (77)
    • L'antre de la bête
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #50 le: 25 novembre 2020 à 23:10:42 »
Est-ce que le S/N du G-010S-A a été remplacé par celui du HG8010H ?
Sans spoof du S/N, l'authentification ne fonctionnera pas.

Slothy

  • Abonné Bbox fibre
  • *
  • Messages: 1 169
  • 2x FTTH 1 Gb/s sur Le Plessis-Trévise (94)
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #51 le: 26 novembre 2020 à 00:25:54 »
Ben justement, je sais pas trop comment faire.

Mon S/N est du type : 485754***A*1E**B donc bien plus long que ce qu'attend l'ONU au niveau des valeurs MfrID et G984Serial. Après il y a aussi le YPSerialNum, j'ai pas testé.

Gnubyte

  • Abonné Orange Fibre
  • *
  • Messages: 1 051
  • Toulon (83)
    • HSGMII intégriste
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #52 le: 26 novembre 2020 à 08:12:27 »
Gardez à l'esprit que quand l'ONU est en statut 05, il a fait le job. Il s'est inscrit dans l'arbre GPON et pour lui tout va bien. Le problème, si il persiste, se trouve entre l'ONU et le routeur.

Slothy

  • Abonné Bbox fibre
  • *
  • Messages: 1 169
  • 2x FTTH 1 Gb/s sur Le Plessis-Trévise (94)
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #53 le: 27 novembre 2020 à 00:07:27 »
Pour le coup... Pas si sur. C'est pas compliqué, mon accès Bouygues avec l'ONT fonctionne sur le VLAN 100. Le port SFP ou se trouve l'ONU et le RJ45 qui va au routeur sont sur un switch, tous deux en VLAN 1 Untag + 100 Taggé. Config très simple, qui finalement ne fonctionne pas.

L'accès à l'interface de l'ONU serait encore possible si il avait fait son boulot jusqu'au bout ?
Est-ce normal de ne pas voir les VLAN que la box attend de la part de l'ONT pour établir une communication (10, 100, 200...) quand je fais un ifconfig sur l'ONU ?

Gnubyte

  • Abonné Orange Fibre
  • *
  • Messages: 1 051
  • Toulon (83)
    • HSGMII intégriste
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #54 le: 27 novembre 2020 à 08:11:34 »
Citer
Config très simple, qui finalement ne fonctionne pas.

Tu le dis toi même.
L'ONU est 05, cependant. Lui, il est inscrit sur l'arbre GPON.
Simplifies encore.
J'ai éradiqué le problème. J'ai ponté. Simple. Brutal. Basal.

mirtouf

  • Abonné Bbox fibre
  • *
  • Messages: 1 297
  • Chelles (77)
    • L'antre de la bête
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #55 le: 27 novembre 2020 à 19:37:29 »
J'ai réussi à inscrire 2 ONT différents sur l'arbre en ZMD:
- ubnt loco / nanoG mais le multicast qui merdoie
- HG8010H du commerce (i.e. firmware d'origine) avec tout qui fonctionne

J'attends mon ONT au format SFP pour tester.

eahlys

  • Expert
  • Abonné Free fibre
  • *
  • Messages: 1 099
  • Shadow AS64476 & AS396919
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #56 le: 27 novembre 2020 à 20:11:33 »
Pour le coup... Pas si sur. C'est pas compliqué, mon accès Bouygues avec l'ONT fonctionne sur le VLAN 100. Le port SFP ou se trouve l'ONU et le RJ45 qui va au routeur sont sur un switch, tous deux en VLAN 1 Untag + 100 Taggé. Config très simple, qui finalement ne fonctionne pas.

L'accès à l'interface de l'ONU serait encore possible si il avait fait son boulot jusqu'au bout ?
Est-ce normal de ne pas voir les VLAN que la box attend de la part de l'ONT pour établir une communication (10, 100, 200...) quand je fais un ifconfig sur l'ONU ?
La Bbox n’attend que les VLANs 10 et 100, le 200 n’est plus d’actualité

mirtouf

  • Abonné Bbox fibre
  • *
  • Messages: 1 297
  • Chelles (77)
    • L'antre de la bête
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #57 le: 27 novembre 2020 à 21:13:58 »
Le VLAN 10 pour la bbox ?
Marrant, je pensais qu'il était dédié à la maintenance des équipements type OLT et ONT.

Slothy

  • Abonné Bbox fibre
  • *
  • Messages: 1 169
  • 2x FTTH 1 Gb/s sur Le Plessis-Trévise (94)
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #58 le: 27 novembre 2020 à 22:14:50 »
J'ai réussi à inscrire 2 ONT différents sur l'arbre en ZMD:
- ubnt loco / nanoG mais le multicast qui merdoie
- HG8010H du commerce (i.e. firmware d'origine) avec tout qui fonctionne

J'attends mon ONT au format SFP pour tester.
Avec changement du S/N aussi sur le HG8010H ? Tu as pu confirmer de manière certaine les réglages nécessaires à l'authentification ?
« Modifié: 27 novembre 2020 à 23:08:22 par Slothy »

mirtouf

  • Abonné Bbox fibre
  • *
  • Messages: 1 297
  • Chelles (77)
    • L'antre de la bête
Routeur SFP pour remplacer bbox fibre + ONT
« Réponse #59 le: 28 novembre 2020 à 10:31:31 »
Cela fonctionne sans changer le SN sur le HG8010H.