La Fibre
Télécom => Logiciels et systèmes d'exploitation => Iperf => Discussion démarrée par: Byounguk Lee le 18 mai 2016 à 16:50:53
-
Hello!
Thanks to click!
I want to install iperf3.1 on raspberry pi.
But "https://iperf.fr/iperf-download.php" page do not support iperf3 above 3.1 version for ARM core.
Because raspberry pi has ARM core, It do not use iperf3 of i386 or amd 64.
I tried to use lots of way to install iperf3.1 on raspbeery pi.
Using source code of above version 3.1 and making compile show error.
and using "apt install iperf3" only install iperf3 below version 3.1 on raspberry pi.
Is there another way to install iperf3.1 on rapsberry-pi?
Merci beaucoup
ByoungUk Lee
-
Hello,
I added the Ubuntu / Debian packages for ARMhf and ARM64 : https://iperf.fr/iperf-download.php#ubuntu-ARMhf
I have no ARM computer to test, would it be possible to get me back ?
-
It works fine ! ;) (Raspberry Pi 3)
hugues@Galileo:~ $ iperf3 -c 10.0.0.11 -i 1 -t 20000
Connecting to host 10.0.0.11, port 5201
[ 4] local 10.0.0.23 port 38586 connected to 10.0.0.11 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 11.3 MBytes 94.7 Mbits/sec 0 35.4 KBytes
[ 4] 1.00-2.00 sec 11.2 MBytes 94.2 Mbits/sec 0 36.8 KBytes
[ 4] 2.00-3.00 sec 11.2 MBytes 94.1 Mbits/sec 0 39.6 KBytes
[ 4] 3.00-4.00 sec 11.2 MBytes 94.0 Mbits/sec 0 42.4 KBytes
[ 4] 4.00-5.00 sec 11.2 MBytes 94.2 Mbits/sec 0 42.4 KBytes
^C[ 4] 5.00-5.44 sec 4.95 MBytes 93.8 Mbits/sec 0 42.4 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-5.44 sec 61.1 MBytes 94.2 Mbits/sec 0 sender
[ 4] 0.00-5.44 sec 0.00 Bytes 0.00 bits/sec receiver
iperf3: interrupt - the client has terminated
-
It works!!!
Merci beaucoup!!!
-
It works!!!
Merci beaucoup!!!
Works well too on PINE64 Arm64 ,
Able to made Gigabit tests.