Auteur Sujet: Pb de compatibilité SFP+ sur carte Intel X520-DA2  (Lu 39885 fois)

0 Membres et 1 Invité sur ce sujet

Anonyme

  • Invité
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #24 le: 14 avril 2017 à 11:41:27 »
En plus le SFP officiel est une référence Finisar...

Doit y avoir une histoire d'EEPROM à flasher.
J'appelle cela "La valse des étiquettes" des usines de fabrication,des taxes et droits de douane...

Je partage l'analyse en ce qui concerne l'EEPROM à flasher.

miky01

  • Expert. Réseau RESO-LIAin (01)
  • Abonné K-Net
  • *
  • Messages: 3 829
  • Farges (01)
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #25 le: 14 avril 2017 à 11:58:12 »
J'appelle cela "La valse des étiquettes" des usines de fabrication,des taxes et droits de douane...

Je partage l'analyse en ce qui concerne l'EEPROM à flasher.

C'est surtout du protectionnisme pour obliger l'achat de matos labelisé par le constructeur  >:(
Quand tu vois le prix d'un SFP CISCO et un generique, tout droit sorti de la meme usine Chinoise mais avec un code différent, ca permet de justifier un prix multiplié par 50 ou 100X...

Le pbs est le meme dans beaucoup d'autre domaines, comme p-ex la TV, pourquoi TNTSAT vend des decos SAT "labellisés" ou seul leur deco accepte la carte  (avec un viaccess modifié) a plus de 100€, alors que le meme modele du meme constructeur avec un flash "normal" coute 20€ ???

Foil

  • Abonné Orange Fibre
  • *
  • Messages: 120
  • Strasbourg (67000)
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #26 le: 14 avril 2017 à 12:10:12 »
Merci pour la mise au point,Vivien.Et on patiente:

Orange expérimente à Palaiseau et Cergy une Fibre capable d'atteindre demain un débit descendant jusqu'à 10 Gbits/s:
https://twitter.com/Orange_France/status/722369069899341824?ref_src=twsrc%5Etfw

Anonyme

  • Invité
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #27 le: 14 avril 2017 à 13:01:05 »
/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600
#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100
Si le constructeur n'est pas dans cette liste dans l'EEPROM point de salut. :)
A moins de l'y ajouter ?

vivien

  • Administrateur
  • *
  • Messages: 47 088
    • Twitter LaFibre.info
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #28 le: 14 avril 2017 à 14:10:19 »
Foil : 10 Gb/s sur l'arbre et 1 Gb/s maximum pour les clients. Je te propose de continuer sur Orange expérimente le 10 Gbits/s sur Palaiseau et Cergy

Pour les SFP compatible, lors de la mise en service d'un SFP+ monomode compatible Intel - distance max de 10km sur un serveur, vers un routeur situé dans la même baie (donc une simple jarretière pour connecter les deux) on m'avais indiqué que le signal était un peu faible, mais dans la tolérance.

Voici les valeurs "optical power" pour 3 SFP+ compatible Intel de deux marques différentes.







Vous savez quel est la valeur de référence ?

Dans les 3 cas, on a le serveur dans une baie A qui est connecté par une jarretière au bandeau optique de la baie A. Celui ci va dans le répartiteur optique de la salle où une seconde jarretière le renvoi du module optique de la baie A a celui de la baie B. L'équipement B est connecté par une jarretière au bandeau de brassage de la baie. Il y a donc 6 connecteurs et une distance de 100 mètres.

Le répartiteur optique est de ce type : (il me semble qu'il existe d'autres solutions a base de demi-jarretière pour limiter l'atténuation)

Symbol

  • AS52075 Wifirst
  • Expert
  • *
  • Messages: 349
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #29 le: 14 avril 2017 à 15:34:14 »
Voici les valeurs "optical power" pour 3 SFP+ compatible Intel de deux marques différentes.
Vous savez quel est la valeur de référence ?
C'est marqué dans les specs, y a qu'à les lire.

Prenons par exemple un Skylane: https://www.skylaneoptics.com/wp-content/themes/SkylaneOptics/upload_datasheet/SPP1301010xD.pdf
Tx de -8.2 à 0.5 dBm
Rx de -14.4 à 0 dBm
Budget optique 6.2 dB

Si on prend un Flexoptix https://www.flexoptix.net/en/transceiver/sfp-plus-lr-transceiver-10-gigabit-stm64-sm-1310nm-10km-8db-ddm-dom.html
on a sensiblement la même chose (et il n'y a plus qu'à cliquer sur Compatibility Intel).

Bref, pour savoir si c'est "un peu faible" il faut connaitre pour chaque brin la valeur de Tx d'un coté et la valeur de Rx de l'autre, faire une soustraction, et calculer ainsi l'atténuation sur chaque brin.

vivien

  • Administrateur
  • *
  • Messages: 47 088
    • Twitter LaFibre.info
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #30 le: 14 avril 2017 à 17:14:06 »
Pour interroger le driver pour avoir le Tx Rx, c'est quelle commande ?

Il ne donne pas l'info dans dmesg :
[   13.348951] ixgbe 0000:01:00.0 p1p1: detected SFP+: 5
[   13.612919] ixgbe 0000:01:00.0 p1p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
$ dmesg | grep ixgbe
[    3.830581] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[    3.845432] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    4.016955] ixgbe 0000:01:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8
[    4.017156] ixgbe 0000:01:00.0: PCI Express bandwidth of 32GT/s available
[    4.017165] ixgbe 0000:01:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
[    4.017283] ixgbe 0000:01:00.0: MAC: 2, PHY: 18, SFP+: 5, PBA No: E66560-005
[    4.017301] ixgbe 0000:01:00.0: 90:e2:ba:19:f7:50
[    4.032541] ixgbe 0000:01:00.0: Intel(R) 10 Gigabit Network Connection
[    5.240424] ixgbe 0000:01:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8
[    5.257618] ixgbe 0000:01:00.1: PCI Express bandwidth of 32GT/s available
[    5.266373] ixgbe 0000:01:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
[    5.275593] ixgbe 0000:01:00.1: MAC: 2, PHY: 1, PBA No: E66560-005
[    5.284928] ixgbe 0000:01:00.1: 90:e2:ba:19:f7:51
[    5.294438] ixgbe 0000:01:00.1: Intel(R) 10 Gigabit Network Connection
[    5.307355] ixgbe 0000:01:00.1 p1p2: renamed from eth1
[    5.341594] ixgbe 0000:01:00.0 p1p1: renamed from eth0
[   13.168592] ixgbe 0000:01:00.0: registered PHC device on p1p1
[   13.348951] ixgbe 0000:01:00.0 p1p1: detected SFP+: 5
[   13.612919] ixgbe 0000:01:00.0 p1p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX

mikmak

  • AS12876 Expert Scaleway
  • Expert
  • *
  • Messages: 177
    • @mmarcha
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #31 le: 14 avril 2017 à 18:56:36 »
iirc:
ethtool -m

Mik

vivien

  • Administrateur
  • *
  • Messages: 47 088
    • Twitter LaFibre.info
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #32 le: 14 avril 2017 à 19:10:00 »
Merci, c'est bavard ! Ce sont tous les deux des SFP compatible Intel et non les officiels.

Serveur IBM System x3350 server + Intel Corporation Ethernet 10G 2P X520 Adapter :

$ sudo ethtool -m eth4
Identifier                                : 0x03 (SFP)
Extended identifier                       : 0x04 (GBIC/SFP defined by 2-wire interface ID)
Connector                                 : 0x07 (LC)
Transceiver codes                         : 0x20 0x00 0x00 0x02 0x00 0x00 0x00 0x00
Transceiver type                          : 10G Ethernet: 10G Base-LR
Transceiver type                          : Ethernet: 1000BASE-LX
Encoding                                  : 0x06 (64B/66B)
BR, Nominal                               : 10300MBd
Rate identifier                           : 0x02 (8/4/2G Rx Rate_Select only)
Length (SMF,km)                           : 10km
Length (SMF)                              : 10000m
Length (50um)                             : 0m
Length (62.5um)                           : 0m
Length (Copper)                           : 0m
Length (OM3)                              : 0m
Laser wavelength                          : 1310nm
Vendor name                               : Intel Corp     
Vendor OUI                                : 00:1b:21
Vendor PN                                 : FTLX1471D3BCV-IT
Vendor rev                                : A   
Optical diagnostics support               : Yes
Laser bias current                        : 17.528 mA
Laser output power                        : 0.5182 mW / -2.86 dBm
Receiver signal average optical power     : 0.4770 mW / -3.21 dBm
Module temperature                        : 34.23 degrees C / 93.62 degrees F
Module voltage                            : 3.2000 V
Alarm/warning flags implemented           : Yes
Laser bias current high alarm             : Off
Laser bias current low alarm              : Off
Laser bias current high warning           : Off
Laser bias current low warning            : Off
Laser output power high alarm             : Off
Laser output power low alarm              : Off
Laser output power high warning           : Off
Laser output power low warning            : Off
Module temperature high alarm             : Off
Module temperature low alarm              : Off
Module temperature high warning           : Off
Module temperature low warning            : Off
Module voltage high alarm                 : Off
Module voltage low alarm                  : Off
Module voltage high warning               : Off
Module voltage low warning                : Off
Laser rx power high alarm                 : Off
Laser rx power low alarm                  : Off
Laser rx power high warning               : Off
Laser rx power low warning                : Off
Laser bias current high alarm threshold   : 90.000 mA
Laser bias current low alarm threshold    : 2.000 mA
Laser bias current high warning threshold : 80.000 mA
Laser bias current low warning threshold  : 3.000 mA
Laser output power high alarm threshold   : 1.7783 mW / 2.50 dBm
Laser output power low alarm threshold    : 0.1995 mW / -7.00 dBm
Laser output power high warning threshold : 1.4125 mW / 1.50 dBm
Laser output power low warning threshold  : 0.2512 mW / -6.00 dBm
Module temperature high alarm threshold   : 90.00 degrees C / 194.00 degrees F
Module temperature low alarm threshold    : -25.00 degrees C / -13.00 degrees F
Module temperature high warning threshold : 85.00 degrees C / 185.00 degrees F
Module temperature low warning threshold  : -20.00 degrees C / -4.00 degrees F
Module voltage high alarm threshold       : 3.6000 V
Module voltage low alarm threshold        : 3.0000 V
Module voltage high warning threshold     : 3.5000 V
Module voltage low warning threshold      : 3.0500 V
Laser rx power high alarm threshold       : 1.0000 mW / 0.00 dBm
Laser rx power low alarm threshold        : 0.0158 mW / -18.01 dBm
Laser rx power high warning threshold     : 0.7943 mW / -1.00 dBm
Laser rx power low warning threshold      : 0.0200 mW / -16.99 dBm

Serveur Dell Poweredge R210 II + Intel Corporation 82599ES 10-Gigabit SFI/SFP+ :
$ sudo ethtool -m p1p1
Identifier                                : 0x03 (SFP)
Extended identifier                       : 0x04 (GBIC/SFP defined by 2-wire interface ID)
Connector                                 : 0x07 (LC)
Transceiver codes                         : 0x20 0x00 0x00 0x02 0x00 0x00 0x00 0x00
Transceiver type                          : 10G Ethernet: 10G Base-LR
Transceiver type                          : Ethernet: 1000BASE-LX
Encoding                                  : 0x06 (64B/66B)
BR, Nominal                               : 10300MBd
Rate identifier                           : 0x02 (8/4/2G Rx Rate_Select only)
Length (SMF,km)                           : 10km
Length (SMF)                              : 10000m
Length (50um)                             : 0m
Length (62.5um)                           : 0m
Length (Copper)                           : 0m
Length (OM3)                              : 0m
Laser wavelength                          : 1310nm
Vendor name                               : Intel Corp
Vendor OUI                                : 00:1b:21
Vendor PN                                 : FTLX1471D3BCV-IT
Vendor rev                                : A
Option values                             : 0x00 0x1a
Option                                    : RX_LOS implemented
Option                                    : TX_FAULT implemented
Option                                    : TX_DISABLE implemented
BR margin, max                            : 0%
BR margin, min                            : 0%
Vendor SN                                 : b1ndp05w0576
Date code                                 : 130405
Optical diagnostics support               : Yes
Laser bias current                        : 33.302 mA
Laser output power                        : 0.5906 mW / -2.29 dBm
Receiver signal average optical power     : 0.5137 mW / -2.89 dBm
Module temperature                        : 33.45 degrees C / 92.20 degrees F
Module voltage                            : 3.1753 V
Alarm/warning flags implemented           : Yes
Laser bias current high alarm             : Off
Laser bias current low alarm              : Off
Laser bias current high warning           : Off
Laser bias current low warning            : Off
Laser output power high alarm             : Off
Laser output power low alarm              : Off
Laser output power high warning           : Off
Laser output power low warning            : Off
Module temperature high alarm             : Off
Module temperature low alarm              : Off
Module temperature high warning           : Off
Module temperature low warning            : Off
Module voltage high alarm                 : Off
Module voltage low alarm                  : Off
Module voltage high warning               : Off
Module voltage low warning                : Off
Laser rx power high alarm                 : Off
Laser rx power low alarm                  : Off
Laser rx power high warning               : Off
Laser rx power low warning                : Off
Laser bias current high alarm threshold   : 90.000 mA
Laser bias current low alarm threshold    : 2.000 mA
Laser bias current high warning threshold : 80.000 mA
Laser bias current low warning threshold  : 3.000 mA
Laser output power high alarm threshold   : 1.7783 mW / 2.50 dBm
Laser output power low alarm threshold    : 0.1995 mW / -7.00 dBm
Laser output power high warning threshold : 1.4125 mW / 1.50 dBm
Laser output power low warning threshold  : 0.2512 mW / -6.00 dBm
Module temperature high alarm threshold   : 90.00 degrees C / 194.00 degrees F
Module temperature low alarm threshold    : -25.00 degrees C / -13.00 degrees F
Module temperature high warning threshold : 85.00 degrees C / 185.00 degrees F
Module temperature low warning threshold  : -20.00 degrees C / -4.00 degrees F
Module voltage high alarm threshold       : 3.6000 V
Module voltage low alarm threshold        : 3.0000 V
Module voltage high warning threshold     : 3.5000 V
Module voltage low warning threshold      : 3.0500 V
Laser rx power high alarm threshold       : 1.0000 mW / 0.00 dBm
Laser rx power low alarm threshold        : 0.0158 mW / -18.01 dBm
Laser rx power high warning threshold     : 0.7943 mW / -1.00 dBm
Laser rx power low warning threshold      : 0.0200 mW / -16.99 dBm

acontios

  • AS34019 - Hivane Network
  • Professionnel des télécoms
  • *
  • Messages: 191
  • Paris (75)
    • Hivane
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #33 le: 14 avril 2017 à 19:30:35 »
Bon, ben sans SFP+, ca load bien:

[10468.824399] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6
[10468.824402] Copyright(c) 1999 - 2016 Intel Corporation.
[10468.824809] ixgbe 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[10468.824861] ixgbe: allow_unsupported_sfp Enabled
[10468.911325] ixgbe 0000:05:00.0: PCI Express bandwidth of 16GT/s available
[10468.911328] ixgbe 0000:05:00.0: (Speed:2.5GT/s, Width: x8, Encoding Loss:20%)
[10468.911403] ixgbe 0000:05:00.0 eth6: MAC: 1, PHY: 10, PBA No: E37002-011
[10468.911405] ixgbe 0000:05:00.0: 00:1b:21:d9:79:0d
[10468.911410] ixgbe 0000:05:00.0 eth6: Enabled Features: RxQ: 16 TxQ: 16
[10468.911412] ixgbe 0000:05:00.0 eth6: Intel(R) 10 Gigabit Network Connection
[10468.911504] ixgbe 0000:05:00.1: can't disable ASPM; OS doesn't have ASPM control
[10468.911550] ixgbe: allow_unsupported_sfp Enabled
[10468.995313] ixgbe 0000:05:00.1: PCI Express bandwidth of 16GT/s available
[10468.995318] ixgbe 0000:05:00.1: (Speed:2.5GT/s, Width: x8, Encoding Loss:20%)
[10468.995393] ixgbe 0000:05:00.1 eth7: MAC: 1, PHY: 10, PBA No: E37002-011
[10468.995396] ixgbe 0000:05:00.1: 00:1b:21:d9:79:0c
[10468.995398] ixgbe 0000:05:00.1 eth7: Enabled Features: RxQ: 16 TxQ: 16
[10468.995400] ixgbe 0000:05:00.1 eth7: Intel(R) 10 Gigabit Network Connection

Je sens que je vais être condamné à aller acheter du SFP+ codé Intel :(

jack

  • Professionnel des télécoms
  • *
  • Messages: 1 674
  • La Madeleine (59)
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #34 le: 14 avril 2017 à 19:37:34 »
Je sens que je vais être condamné à acheter

Condoléances :'(

acontios

  • AS34019 - Hivane Network
  • Professionnel des télécoms
  • *
  • Messages: 191
  • Paris (75)
    • Hivane
Pb de compatibilité SFP+ sur carte Intel X520-DA2
« Réponse #35 le: 14 avril 2017 à 19:42:32 »
Ca ne sera certainement pas du Intel genuine. Pas question de leur donner un centime, à ces pourris !