Auteur Sujet: Datacenter virtuel  (Lu 3278 fois)

0 Membres et 1 Invité sur ce sujet

Anonyme

  • Invité
Datacenter virtuel
« le: 12 janvier 2022 à 21:12:51 »
Nvidia propose un datacenter virtuel.

https://air.nvidia.com/SimulationsAll


"
Your Cumulus VXLAN EVPN Symmetric virtual data center is ready!
You can access it directly at https://air.nvidia.com/
Your virtual data center will automatically go to sleep on January 13, 2022 at 07:28 UTC but you can extend this using the "Add Time" button.
Your virtual data center will expire on January 15, 2022 at 19:27 UTC, but don't worry! You can always come back and request another one.
Please feel free to contact us at citc-support@nvidia.com if you have any questions or need assistance.

Thank you,
The NVIDIA Networking Team "

Anonyme

  • Invité
Datacenter virtuel
« Réponse #1 le: 13 janvier 2022 à 03:08:30 »
L'intéret est de comprendre l'architecture.
Des AS privés, un routage BGP interne sont utilisés pour le routage.

pine01 login: cumulus
Password:
Last login: Wed Aug 25 09:45:59 PDT 2021 from 192.168.200.1 on pts/0
Linux spine01 4.19.0-cl-1-amd64 #1 SMP Debian 4.19.176-1+cl4.4.0u1 (2021-06-25) x86_64
#########################################################
Successfully logged in to: spine01
#########################################################
cumulus@spine01:mgmt:~$ net show bgp
    <ipv4/prefixlen>      :  An IPv4 address and prefix length
    <ipv4>                :  an IPv4 address
    <ipv6/prefixlen>      :  An IPv6 address and prefix length
    <ipv6>                :  An IPv6 address
    evpn                  :  Ethernet VPN
    ipv4                  :  Internet Protocol version 4
    ipv6                  :  Internet Protocol version 6
    json                  :  Print output in json
    l2vpn                 :  Layer-2 VPN
    large-community-info  :  add help text
    neighbor              :  A BGP, OSPF, PIM, etc neighbor
    nexthop               :  BGP nexthops
    summary               :  Summary
    update-groups         :  BGP update groups
    vrf                   :  Virtual routing and forwarding
    <ENTER>
cumulus@spine01:mgmt:~$ net show bgp ne
    neighbor  :  A BGP, OSPF, PIM, etc neighbor
    nexthop   :  BGP nexthops
cumulus@spine01:mgmt:~$ net show bgp neighbor
BGP neighbor on swp1: fe80::4638:39ff:fe00:2, remote AS 65101, local AS 65100, external link
Hostname: leaf01
 Member of peer-group underlay for session parameters
  BGP version 4, remote router ID 10.10.10.1, local router ID 10.10.10.101
  BGP state = Established, up for 06:26:23
  Last read 00:00:01, Last write 00:00:02
  Hold time is 9, keepalive interval is 3 seconds
  Neighbor capabilities:
    4 Byte AS: advertised and received
    AddPath:
      IPv4 Unicast: RX advertised IPv4 Unicast and received
      L2VPN EVPN: RX advertised L2VPN EVPN and received
    Extended nexthop: advertised and received
      Address families by peer:
                   IPv4 Unicast
    Route refresh: advertised and received(old & new)
    Address Family IPv4 Unicast: advertised and received
    Address Family L2VPN EVPN: advertised and received
    Hostname Capability: advertised (name: spine01,domain name: n/a) received (name: leaf01,domain name: n/a)
    Graceful Restart Capability: advertised and received
      Remote Restart timer is 120 seconds
      Address families by peer:
        none
  Graceful restart information:
    End-of-RIB send: IPv4 Unicast, L2VPN EVPN
    End-of-RIB received: IPv4 Unicast, L2VPN EVPN
    Local GR Mode: Helper*
    Remote GR Mode: Helper
    R bit: False
    Timers:
      Configured Restart Time(sec): 120
      Received Restart Time(sec): 120
    IPv4 Unicast:
      F bit: False
      End-of-RIB sent: Yes
      End-of-RIB sent after update: No
      End-of-RIB received: Yes
      Timers:
        Configured Stale Path Time(sec): 360
  Message statistics:
    Inq depth is 0
    Outq depth is 0
                         Sent       Rcvd
    Opens:                  1          1
    Notifications:          0          0
    Updates:              270        250
    Keepalives:          7727       7726
    Route Refresh:          0          0
    Capability:             0          0
    Total:               7998       7977
  Minimum time between advertisement runs is 0 seconds

 For address family: IPv4 Unicast
  underlay peer-group member
  Update group 1, subgroup 1
  Packet Queue length 0
  Community attribute sent to this neighbor(all)
  3 accepted prefixes

 For address family: L2VPN EVPN
  underlay peer-group member
  Update group 2, subgroup 2
  Packet Queue length 0
  NEXT_HOP is propagated unchanged to this neighbor
  Community attribute sent to this neighbor(all)
  21 accepted prefixes

  Connections established 1; dropped 0
  Last reset 06:26:24,  Waiting for peer OPEN
Local host: fe80::4638:39ff:fe00:1, Local port: 54564
Foreign host: fe80::4638:39ff:fe00:2, Foreign port: 179
Nexthop: 10.10.10.101
Nexthop global: fe80::4638:39ff:fe00:1
Nexthop local: fe80::4638:39ff:fe00:1
BGP connection: shared network
BGP Connect Retry Timer in Seconds: 10
Read thread: on  Write thread: on  FD used: 27

BGP neighbor on swp2: fe80::4638:39ff:fe00:a, remote AS 65102, local AS 65100, external link
Hostname: leaf02
 Member of peer-group underlay for session parameters
  BGP version 4, remote router ID 10.10.10.2, local router ID 10.10.10.101
  BGP state = Established, up for 06:26:23
  Last read 00:00:02, Last write 00:00:02
  Hold time is 9, keepalive interval is 3 seconds
  Neighbor capabilities:
    4 Byte AS: advertised and received
    AddPath:
      IPv4 Unicast: RX advertised IPv4 Unicast and received
      L2VPN EVPN: RX advertised L2VPN EVPN and received
    Extended nexthop: advertised and received
      Address families by peer:
                   IPv4 Unicast
    Route refresh: advertised and received(old & new)
    Address Family IPv4 Unicast: advertised and received
    Address Family L2VPN EVPN: advertised and received
    Hostname Capability: advertised (name: spine01,domain name: n/a) received (name: leaf02,domain name: n/a)
    Graceful Restart Capability: advertised and received
      Remote Restart timer is 120 seconds
      Address families by peer:
        none
  Graceful restart information:
    End-of-RIB send: IPv4 Unicast, L2VPN EVPN
    End-of-RIB received: IPv4 Unicast, L2VPN EVPN
    Local GR Mode: Helper*
    Remote GR Mode: Helper
    R bit: False
    Timers:
      Configured Restart Time(sec): 120
      Received Restart Time(sec): 120
    IPv4 Unicast:
      F bit: False
      End-of-RIB sent: Yes
      End-of-RIB sent after update: No
      End-of-RIB received: Yes
      Timers:
        Configured Stale Path Time(sec): 360
  Message statistics:
    Inq depth is 0
    Outq depth is 0
                         Sent       Rcvd
    Opens:                  1          1
    Notifications:          0          0
    Updates:              270        254
    Keepalives:          7727       7726
    Route Refresh:          0          0
    Capability:             0          0
    Total:               7998       7981
  Minimum time between advertisement runs is 0 seconds

 For address family: IPv4 Unicast
  underlay peer-group member
  Update group 1, subgroup 1
  Packet Queue length 0
  Community attribute sent to this neighbor(all)
  3 accepted prefixes

 For address family: L2VPN EVPN
  underlay peer-group member
  Update group 2, subgroup 2
  Packet Queue length 0
  NEXT_HOP is propagated unchanged to this neighbor
  Community attribute sent to this neighbor(all)
  21 accepted prefixes

  Connections established 1; dropped 0
  Last reset 06:26:24,  Waiting for peer OPEN
Local host: fe80::4638:39ff:fe00:9, Local port: 51518
Foreign host: fe80::4638:39ff:fe00:a, Foreign port: 179
Nexthop: 10.10.10.101
Nexthop global: fe80::4638:39ff:fe00:9
Nexthop local: fe80::4638:39ff:fe00:9
BGP connection: shared network
BGP Connect Retry Timer in Seconds: 10
Read thread: on  Write thread: on  FD used: 24

BGP neighbor on swp3: fe80::4638:39ff:fe00:12, remote AS 65103, local AS 65100, external link
Hostname: leaf03
 Member of peer-group underlay for session parameters
  BGP version 4, remote router ID 10.10.10.3, local router ID 10.10.10.101
  BGP state = Established, up for 06:26:23
  Last read 00:00:01, Last write 00:00:02
  Hold time is 9, keepalive interval is 3 seconds
  Neighbor capabilities:
    4 Byte AS: advertised and received
    AddPath:
      IPv4 Unicast: RX advertised IPv4 Unicast and received
      L2VPN EVPN: RX advertised L2VPN EVPN and received
    Extended nexthop: advertised and received
      Address families by peer:
                   IPv4 Unicast
    Route refresh: advertised and received(old & new)
    Address Family IPv4 Unicast: advertised and received
    Address Family L2VPN EVPN: advertised and received
    Hostname Capability: advertised (name: spine01,domain name: n/a) received (name: leaf03,domain name: n/a)
    Graceful Restart Capability: advertised and received
      Remote Restart timer is 120 seconds
      Address families by peer:
        none
  Graceful restart information:
    End-of-RIB send: IPv4 Unicast, L2VPN EVPN
    End-of-RIB received: IPv4 Unicast, L2VPN EVPN
    Local GR Mode: Helper*
    Remote GR Mode: Helper
    R bit: False
    Timers:
      Configured Restart Time(sec): 120
      Received Restart Time(sec): 120
    IPv4 Unicast:
      F bit: False
      End-of-RIB sent: Yes
      End-of-RIB sent after update: No
      End-of-RIB received: Yes
      Timers:
        Configured Stale Path Time(sec): 360
  Message statistics:
    Inq depth is 0
    Outq depth is 0
                         Sent       Rcvd
    Opens:                  1          1
    Notifications:          0          0
    Updates:              270        247
    Keepalives:          7727       7727
    Route Refresh:          0          0
    Capability:             0          0
    Total:               7998       7975
  Minimum time between advertisement runs is 0 seconds

 For address family: IPv4 Unicast
  underlay peer-group member
  Update group 1, subgroup 1
  Packet Queue length 0
  Community attribute sent to this neighbor(all)
  3 accepted prefixes

 For address family: L2VPN EVPN
  underlay peer-group member
  Update group 2, subgroup 2
  Packet Queue length 0
  NEXT_HOP is propagated unchanged to this neighbor
  Community attribute sent to this neighbor(all)
  21 accepted prefixes

  Connections established 1; dropped 0
  Last reset 06:26:24,  Waiting for peer OPEN
Local host: fe80::4638:39ff:fe00:11, Local port: 42258
Foreign host: fe80::4638:39ff:fe00:12, Foreign port: 179
Nexthop: 10.10.10.101
Nexthop global: fe80::4638:39ff:fe00:11
Nexthop local: fe80::4638:39ff:fe00:11
BGP connection: shared network
BGP Connect Retry Timer in Seconds: 10
Read thread: on  Write thread: on  FD used: 26

BGP neighbor on swp4: fe80::4638:39ff:fe00:1a, remote AS 65104, local AS 65100, external link
Hostname: leaf04
 Member of peer-group underlay for session parameters
  BGP version 4, remote router ID 10.10.10.4, local router ID 10.10.10.101
  BGP state = Established, up for 06:26:23
  Last read 00:00:01, Last write 00:00:02
  Hold time is 9, keepalive interval is 3 seconds
  Neighbor capabilities:
    4 Byte AS: advertised and received
    AddPath:
      IPv4 Unicast: RX advertised IPv4 Unicast and received
      L2VPN EVPN: RX advertised L2VPN EVPN and received
    Extended nexthop: advertised and received
      Address families by peer:
                   IPv4 Unicast
    Route refresh: advertised and received(old & new)
    Address Family IPv4 Unicast: advertised and received
    Address Family L2VPN EVPN: advertised and received
    Hostname Capability: advertised (name: spine01,domain name: n/a) received (name: leaf04,domain name: n/a)
    Graceful Restart Capability: advertised and received
      Remote Restart timer is 120 seconds
      Address families by peer:
        none
  Graceful restart information:
    End-of-RIB send: IPv4 Unicast, L2VPN EVPN
    End-of-RIB received: IPv4 Unicast, L2VPN EVPN
    Local GR Mode: Helper*
    Remote GR Mode: Helper
    R bit: False
    Timers:
      Configured Restart Time(sec): 120
      Received Restart Time(sec): 120
    IPv4 Unicast:
      F bit: False
      End-of-RIB sent: Yes
      End-of-RIB sent after update: No
      End-of-RIB received: Yes
      Timers:
        Configured Stale Path Time(sec): 360
  Message statistics:
    Inq depth is 0
    Outq depth is 0
                         Sent       Rcvd
    Opens:                  2          1
    Notifications:          0          0
    Updates:              270        236
    Keepalives:          7727       7726
    Route Refresh:          0          0
    Capability:             0          0
    Total:               7999       7963
  Minimum time between advertisement runs is 0 seconds

 For address family: IPv4 Unicast
  underlay peer-group member
  Update group 1, subgroup 1
  Packet Queue length 0
  Community attribute sent to this neighbor(all)
  3 accepted prefixes

 For address family: L2VPN EVPN
  underlay peer-group member
  Update group 2, subgroup 2
  Packet Queue length 0
  NEXT_HOP is propagated unchanged to this neighbor
  Community attribute sent to this neighbor(all)
  21 accepted prefixes

  Connections established 1; dropped 0
  Last reset 06:26:24,  No AFI/SAFI activated for peer
Local host: fe80::4638:39ff:fe00:19, Local port: 179
Foreign host: fe80::4638:39ff:fe00:1a, Foreign port: 53020
Nexthop: 10.10.10.101
Nexthop global: fe80::4638:39ff:fe00:19
Nexthop local: fe80::4638:39ff:fe00:19
BGP connection: shared network
BGP Connect Retry Timer in Seconds: 10
Read thread: on  Write thread: on  FD used: 23

BGP neighbor on swp5: fe80::4638:39ff:fe00:22, remote AS 65163, local AS 65100, external link
Hostname: border01
 Member of peer-group underlay for session parameters
  BGP version 4, remote router ID 10.10.10.63, local router ID 10.10.10.101
  BGP state = Established, up for 06:26:23
  Last read 00:00:02, Last write 00:00:02
  Hold time is 9, keepalive interval is 3 seconds
  Neighbor capabilities:
    4 Byte AS: advertised and received
    AddPath:
      IPv4 Unicast: RX advertised IPv4 Unicast and received
      L2VPN EVPN: RX advertised L2VPN EVPN and received
    Extended nexthop: advertised and received
      Address families by peer:
                   IPv4 Unicast
    Route refresh: advertised and received(old & new)
    Address Family IPv4 Unicast: advertised and received
    Address Family L2VPN EVPN: advertised and received
    Hostname Capability: advertised (name: spine01,domain name: n/a) received (name: border01,domain name: n/a)
    Graceful Restart Capability: advertised and received
      Remote Restart timer is 120 seconds
      Address families by peer:
        none
  Graceful restart information:
    End-of-RIB send: IPv4 Unicast, L2VPN EVPN
    End-of-RIB received: IPv4 Unicast, L2VPN EVPN
    Local GR Mode: Helper*
    Remote GR Mode: Helper
    R bit: False
    Timers:
      Configured Restart Time(sec): 120
      Received Restart Time(sec): 120
    IPv4 Unicast:
      F bit: False
      End-of-RIB sent: Yes
      End-of-RIB sent after update: No
      End-of-RIB received: Yes
      Timers:
        Configured Stale Path Time(sec): 360
  Message statistics:
    Inq depth is 0
    Outq depth is 0
                         Sent       Rcvd
    Opens:                  1          1
    Notifications:          0          0
    Updates:              270        177
    Keepalives:          7727       7727
    Route Refresh:          0          0
    Capability:             0          0
    Total:               7998       7905
  Minimum time between advertisement runs is 0 seconds

 For address family: IPv4 Unicast
  underlay peer-group member
  Update group 1, subgroup 1
  Packet Queue length 0
  Community attribute sent to this neighbor(all)
  3 accepted prefixes

 For address family: L2VPN EVPN
  underlay peer-group member
  Update group 2, subgroup 2
  Packet Queue length 0
  NEXT_HOP is propagated unchanged to this neighbor
  Community attribute sent to this neighbor(all)
  3 accepted prefixes

  Connections established 1; dropped 0
  Last reset 06:26:24,  Waiting for peer OPEN
Local host: fe80::4638:39ff:fe00:21, Local port: 33534
Foreign host: fe80::4638:39ff:fe00:22, Foreign port: 179
Nexthop: 10.10.10.101
Nexthop global: fe80::4638:39ff:fe00:21
Nexthop local: fe80::4638:39ff:fe00:21
BGP connection: shared network
BGP Connect Retry Timer in Seconds: 10
Read thread: on  Write thread: on  FD used: 28

BGP neighbor on swp6: fe80::4638:39ff:fe00:2a, remote AS 65164, local AS 65100, external link
Hostname: border02
 Member of peer-group underlay for session parameters
  BGP version 4, remote router ID 10.10.10.64, local router ID 10.10.10.101
  BGP state = Established, up for 06:17:23
  Last read 00:00:01, Last write 00:00:01
  Hold time is 9, keepalive interval is 3 seconds
  Neighbor capabilities:
    4 Byte AS: advertised and received
    AddPath:
      IPv4 Unicast: RX advertised IPv4 Unicast and received
      L2VPN EVPN: RX advertised L2VPN EVPN and received
    Extended nexthop: advertised and received
      Address families by peer:
                   IPv4 Unicast
    Route refresh: advertised and received(old & new)
    Address Family IPv4 Unicast: advertised and received
    Address Family L2VPN EVPN: advertised and received
    Hostname Capability: advertised (name: spine01,domain name: n/a) received (name: border02,domain name: n/a)
    Graceful Restart Capability: advertised and received
      Remote Restart timer is 120 seconds
      Address families by peer:
        none
  Graceful restart information:
    End-of-RIB send: IPv4 Unicast, L2VPN EVPN
    End-of-RIB received: IPv4 Unicast, L2VPN EVPN
    Local GR Mode: Helper*
    Remote GR Mode: Helper
    R bit: False
    Timers:
      Configured Restart Time(sec): 120
      Received Restart Time(sec): 120
    IPv4 Unicast:
      F bit: False
      End-of-RIB sent: Yes
      End-of-RIB sent after update: Yes
      End-of-RIB received: Yes
      Timers:
        Configured Stale Path Time(sec): 360
  Message statistics:
    Inq depth is 0
    Outq depth is 0
                         Sent       Rcvd
    Opens:                  2          2
    Notifications:          2          0
    Updates:              327        275
    Keepalives:          7728       7725
    Route Refresh:          0          0
    Capability:             0          0
    Total:               8059       8002
  Minimum time between advertisement runs is 0 seconds

 For address family: IPv4 Unicast
  underlay peer-group member
  Update group 1, subgroup 1
  Packet Queue length 0
  Community attribute sent to this neighbor(all)
  3 accepted prefixes

 For address family: L2VPN EVPN
  underlay peer-group member
  Update group 2, subgroup 2
  Packet Queue length 0
  NEXT_HOP is propagated unchanged to this neighbor
  Community attribute sent to this neighbor(all)
  3 accepted prefixes

  Connections established 2; dropped 1
  Last reset 06:17:24,   Notification sent (Hold Timer Expired)
Local host: fe80::4638:39ff:fe00:29, Local port: 38956
Foreign host: fe80::4638:39ff:fe00:2a, Foreign port: 179
Nexthop: 10.10.10.101
Nexthop global: fe80::4638:39ff:fe00:29
Nexthop local: fe80::4638:39ff:fe00:29
BGP connection: shared network
BGP Connect Retry Timer in Seconds: 10
Read thread: on  Write thread: on  FD used: 25
cumulus@spine01:mgmt:~$ timed out waiting for input: auto-logout

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
   Welcome to

   Login with: cumulus/CumulusLinux!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

spine01 login:

Anonyme

  • Invité
Datacenter virtuel
« Réponse #2 le: 13 janvier 2022 à 06:08:51 »
Le livre est librement téléchargeable sur le site de Nvidia, et aussi en pièce jointe.
Je recommande sa lecture.

https://resource.nvidia.com/en-us-bgp-datacenter

Le code de configuration sur github
https://github.com/oreillymedia/bgp_in_the_data_center

Anonyme

  • Invité
Datacenter virtuel
« Réponse #3 le: 14 janvier 2022 à 04:30:25 »
Connexion out-of-band
philippemarques@Philippes-MacBook-Pro ~ % ssh -p 12314 cumulus@worker01.air.nvidia.com
The authenticity of host '[worker01.air.nvidia.com]:12314 ([147.75.47.205]:12314)' can't be established.
ED25519 key fingerprint is SHA256:6FXartZ/3RcoO2Fx4z7OxeHzUk7HhX0F2HxIQe7Jlvc.
This host key is known by the following other names/addresses:
    ~/.ssh/known_hosts:32: [worker08.air.nvidia.com]:28366
    ~/.ssh/known_hosts:34: [worker08.air.nvidia.com]:22378
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '[worker01.air.nvidia.com]:12314' (ED25519) to the list of known hosts.
You are required to change your password immediately (root enforced)
Welcome to Ubuntu 18.04.5 LTS (GNU/Linux 4.15.0-151-generic x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage

  System information as of Fri Jan 14 03:25:00 UTC 2022

  System load:  0.0               Processes:           106
  Usage of /:   29.2% of 9.29GB   Users logged in:     0
  Memory usage: 23%               IP address for eth0: 169.254.0.2
  Swap usage:   0%                IP address for eth1: 192.168.200.1

 * Super-optimized for small spaces - read how we shrank the memory
   footprint of MicroK8s to make it the smallest full K8s around.

   https://ubuntu.com/blog/microk8s-memory-optimisation

25 updates can be applied immediately.
16 of these updates are standard security updates.
To see these additional updates run: apt list --upgradable


Last login: Thu Sep  2 15:52:09 2021
WARNING: Your password has expired.
You must change your password now and login again!
Changing password for cumulus.
(current) UNIX password:
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
Connection to worker01.air.nvidia.com closed.
philippemarques@Philippes-MacBook-Pro ~ % ssh -p 12314 cumulus@worker01.air.nvidia.com
Welcome to Ubuntu 18.04.5 LTS (GNU/Linux 4.15.0-151-generic x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage

  System information as of Fri Jan 14 03:25:38 UTC 2022

  System load:  0.08              Processes:           108
  Usage of /:   29.2% of 9.29GB   Users logged in:     0
  Memory usage: 23%               IP address for eth0: 169.254.0.2
  Swap usage:   0%                IP address for eth1: 192.168.200.1

 * Super-optimized for small spaces - read how we shrank the memory
   footprint of MicroK8s to make it the smallest full K8s around.

   https://ubuntu.com/blog/microk8s-memory-optimisation

25 updates can be applied immediately.
16 of these updates are standard security updates.
To see these additional updates run: apt list --upgradable

New release '20.04.3 LTS' available.
Run 'do-release-upgrade' to upgrade to it.


Last login: Fri Jan 14 03:25:00 2022 from fd01:1:1:22b4::1
cumulus@oob-mgmt-server:~$

Anonyme

  • Invité
Datacenter virtuel
« Réponse #4 le: 14 janvier 2022 à 04:39:48 »
Parce qu'il faut bien s'amuser un peu.

Ubuntu 18.04.5 LTS server01 ttyS0

server01 login: cumulus
Password:
Last login: Wed Aug 25 09:54:05 PDT 2021 from 192.168.200.1 on pts/0
Welcome to Ubuntu 18.04.5 LTS (GNU/Linux 4.15.0-140-generic x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage

  System information as of Thu Jan 13 19:33:37 PST 2022

  System load:  0.0               Processes:             88
  Usage of /:   21.0% of 9.29GB   Users logged in:       0
  Memory usage: 38%               IP address for eth0:   192.168.200.31
  Swap usage:   0%                IP address for uplink: 10.1.10.101


89 packages can be updated.
59 of these updates are security updates.
To see these additional updates run: apt list --upgradable


cumulus@server01:~$ sudo passwd root
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
cumulus@server01:~$ su root
Password:
root@server01:/home/cumulus# cd /etc/
root@server01:/etc# ls
NetworkManager                 hosts.allow             polkit-1
X11                            hosts.deny              pollinate
acpi                           init.d                  popularity-contest.conf
adduser.conf                   initramfs-tools         profile
alternatives                   inputrc                 profile.d
apm                            iproute2                protocols
apparmor                       iscsi                   python
apparmor.d                     issue                   python2.7
apport                         issue.net               python3
apt                            kernel                  python3.6
at.deny                        kernel-img.conf         rc0.d
bash.bashrc                    landscape               rc1.d
bash_completion                ld.so.cache             rc2.d
bash_completion.d              ld.so.conf              rc3.d
bindresvport.blacklist         ld.so.conf.d            rc4.d
binfmt.d                       ldap                    rc5.d
byobu                          legal                   rc6.d
ca-certificates                libaudit.conf           rcS.d
ca-certificates.conf           libpaper.d              resolv.conf
ca-certificates.conf.dpkg-old  lintianrc               rmt
calendar                       lldpd.d                 rpc
cloud                          locale.alias            rsyslog.conf
console-setup                  locale.gen              rsyslog.d
cowpoke.conf                   localtime               screenrc
cron.d                         logcheck                securetty
cron.daily                     login.defs              security
cron.hourly                    logrotate.conf          selinux
cron.monthly                   logrotate.d             sensors.d
cron.weekly                    lsb-release             sensors3.conf
crontab                        ltrace.conf             services
cryptsetup-initramfs           lvm                     sgml
crypttab                       machine-id              shadow
cumulus-air                    magic                   shadow-
dbus-1                         magic.mime              shells
debconf.conf                   mailcap                 skel
debian_version                 mailcap.order           sos.conf
default                        manpath.config          ssh
deluser.conf                   mdadm                   ssl
depmod.d                       mime.types              subgid
devscripts.conf                mke2fs.conf             subgid-
dhcp                           modprobe.d              subuid
dnsmasq.d                      modules                 subuid-
dnsmasq.d-available            modules-load.d          sudoers
dpkg                           mtab                    sudoers.d
dput.cf                        nanorc                  sysctl.conf
ec2_version                    netplan                 sysctl.d
emacs                          netq                    systemd
environment                    network                 terminfo
ethertypes                     networkd-dispatcher     timezone
fonts                          networks                tmpfiles.d
fstab                          newt                    ucf.conf
fuse.conf                      nsswitch.conf           udev
gai.conf                       ntp.conf                ufw
groff                          opt                     update-manager
group                          os-release              update-motd.d
group-                         overlayroot.conf        update-notifier
grub.d                         overlayroot.local.conf  updatedb.conf
gshadow                        pam.conf                vim
gshadow-                       pam.d                   vmware-tools
gss                            papersize               vtrgb
hdparm.conf                    passwd                  wgetrc
host.conf                      passwd-                 xdg
hostname                       perl                    xml
hosts                          pm                      zsh_command_not_found
root@server01:/etc# cat shadow
daemon:*:18719:0:99999:7:::
bin:*:18719:0:99999:7:::
sys:*:18719:0:99999:7:::
sync:*:18719:0:99999:7:::
games:*:18719:0:99999:7:::
man:*:18719:0:99999:7:::
lp:*:18719:0:99999:7:::
mail:*:18719:0:99999:7:::
news:*:18719:0:99999:7:::
uucp:*:18719:0:99999:7:::
proxy:*:18719:0:99999:7:::
www-data:*:18719:0:99999:7:::
backup:*:18719:0:99999:7:::
list:*:18719:0:99999:7:::
irc:*:18719:0:99999:7:::
gnats:*:18719:0:99999:7:::
nobody:*:18719:0:99999:7:::
systemd-network:*:18719:0:99999:7:::
systemd-resolve:*:18719:0:99999:7:::
syslog:*:18719:0:99999:7:::
messagebus:*:18719:0:99999:7:::
_apt:*:18719:0:99999:7:::
lxd:*:18719:0:99999:7:::
uuidd:*:18719:0:99999:7:::
dnsmasq:*:18719:0:99999:7:::
landscape:*:18719:0:99999:7:::
sshd:*:18719:0:99999:7:::
pollinate:*:18719:0:99999:7:::
ubuntu:!:18724:0:99999:7:::
cumulus:$1$8WOBD1pA$uph5ks6BG29F12dt/ORmE0:18724:0:99999:7:::
_lldpd:!:18724:0:99999:7:::
ntp:*:18864:0:99999:7:::
root@server01:/etc#

Anonyme

  • Invité
Datacenter virtuel
« Réponse #5 le: 14 janvier 2022 à 04:57:33 »
Parce que le but du jeu, c'est quand même de jouer avec les VxLAN et EVPN

border02 login: cumulus
Password:
Last login: Wed Aug 25 09:52:53 PDT 2021 from 192.168.200.1 on pts/0
Linux border02 4.19.0-cl-1-amd64 #1 SMP Debian 4.19.176-1+cl4.4.0u1 (2021-06-25) x86_64
#########################################################
Successfully logged in to: border02
#########################################################
cumulus@border02:mgmt:~$ net show
    bfd            :  Bidirectional forwarding detection
    bgp            :  Border Gateway Protocol
    bridge         :  a layer2 bridge
    clag           :  Multi-Chassis Link Aggregation
    commit         :  apply the commit buffer to the system
    configuration  :  settings, configuration state, etc
    counters       :  net show counters
    debugs         :  Debugs
    dhcp-snoop     :  DHCP snooping for IPv4
    dhcp-snoop6    :  DHCP snooping for IPv6
    dot1x          :  Configure, Enable, Delete or Show IEEE 802.1X EAPOL
    evpn           :  Ethernet VPN
    hostname       :  local hostname
    igmp           :  Internet Group Management Protocol
    interface      :  An interface, such as swp1, swp2, etc.
    ip             :  Internet Protocol version 4/6
    ipv6           :  Internet Protocol version 6
    lldp           :  Link Layer Discovery Protocol
    mpls           :  Multiprotocol Label Switching
    mroute         :  Static unicast routes in MRIB for multicast RPF lookup
    msdp           :  Multicast Source Discovery Protocol
    neighbor       :  A BGP, OSPF, PIM, etc neighbor
    ospf           :  Open Shortest Path First (OSPFv2)
    ospf6          :  Open Shortest Path First (OSPFv3)
    package        :  A Cumulus Linux package name
    pbr            :  Policy Based Routing
    pim            :  Protocol Independent Multicast
    port-mirror    :  port-mirror
    port-security  :  Port security
    ptp            :  Precision Time Protocol
    roce           :  Enable RoCE on all interfaces, default mode is lossless
    rollback       :  revert to a previous configuration state
    route          :  EVPN route information
    route-map      :  Route-map
    snmp-server    :  Configure the SNMP server
    system         :  System
    time           :  Time
    version        :  Version number
    vrf            :  Virtual routing and forwarding
    vrrp           :  Virtual Router Redundancy Protocol
cumulus@border02:mgmt:~$ net show evpn
    access-vlan  :  access VLANs
    arp-cache    :  ARP and ND cache
    es           :  Ethernet Segment (Type-4) route
    es-evi       :  ES per EVI
    json         :  Print output in json
    l2-nh        :  Layer 2 nexthops
    mac          :  Media Access Control
    next-hops    :  Next-hops
    rmac         :  Router Mac
    vni          :  VXLAN Network Identifier
    <ENTER>
cumulus@border02:mgmt:~$ net show evpn vni
VNI        Type VxLAN IF              # MACs   # ARPs   # Remote VTEPs  Tenant VRF
102        L2   vni102                2        2        0               BLUE
101        L2   vni101                2        1        0               RED
4001       L3   vniRED                2        4        n/a             RED
4002       L3   vniBLUE               2        4        n/a             BLUE
cumulus@border02:mgmt:~$

Anonyme

  • Invité
Datacenter virtuel
« Réponse #6 le: 14 janvier 2022 à 06:55:08 »
Ce qu'il se passe du côté du Firewall et de l'aide à la configuration des VTEP

oot@fw1:mgmt:~# vtep-ctl --help
vtep-ctl: VTEP configuration utility
usage: vtep-ctl [OPTIONS] COMMAND [ARG...]

VTEP commands:
  show                        print overview of database contents

Manager commands:
  get-manager                 print the managers
  del-manager                 delete the managers
  set-manager TARGET...       set the list of managers to TARGET...

Physical Switch commands:
  add-ps PS                   create a new physical switch named PS
  del-ps PS                   delete PS and all of its ports
  list-ps                     print the names of all the physical switches
  ps-exists PS                exit 2 if PS does not exist

Port commands:
  list-ports PS               print the names of all the ports on PS
  add-port PS PORT            add network device PORT to PS
  del-port PS PORT            delete PORT from PS

Logical Switch commands:
  add-ls LS                   create a new logical switch named LS
  del-ls LS                   delete LS and all of its ports
  list-ls                     print the names of all the logical switches
  ls-exists LS                exit 2 if LS does not exist
  bind-ls PS PORT VLAN LS     bind LS to VLAN on PORT
  unbind-ls PS PORT VLAN      unbind logical switch on VLAN from PORT
  list-bindings PS PORT       list bindings for PORT on PS
  set-replication-mode LS MODE  set replication mode on LS
  get-replication-mode LS       get replication mode on LS

Logical Router commands:
  add-lr LR                   create a new logical router named LR
  del-lr LR                   delete LR
  list-lr                     print the names of all the logical routers
  lr-exists LR                exit 2 if LR does not exist

MAC binding commands:
  add-ucast-local LS MAC [ENCAP] IP   add ucast local entry in LS
  del-ucast-local LS MAC              del ucast local entry from LS
  add-mcast-local LS MAC [ENCAP] IP   add mcast local entry in LS
  del-mcast-local LS MAC [ENCAP] IP   del mcast local entry from LS
  clear-local-macs LS                 clear local mac entries
  list-local-macs LS                  list local mac entries
  add-ucast-remote LS MAC [ENCAP] IP  add ucast remote entry in LS
  del-ucast-remote LS MAC             del ucast remote entry from LS
  add-mcast-remote LS MAC [ENCAP] IP  add mcast remote entry in LS
  del-mcast-remote LS MAC [ENCAP] IP  del mcast remote entry from LS
  clear-remote-macs LS                clear remote mac entries
  list-remote-macs LS                 list remote mac entries

Database commands:
  list TBL [REC]              list RECord (or all records) in TBL
  find TBL CONDITION...       list records satisfying CONDITION in TBL
  get TBL REC COL[:KEY]       print values of COLumns in RECord in TBL
  set TBL REC COL[:KEY]=VALUE set COLumn values in RECord in TBL
  add TBL REC COL [KEY=]VALUE add (KEY=)VALUE to COLumn in RECord in TBL
  remove TBL REC COL [KEY=]VALUE  remove (KEY=)VALUE from COLumn
  clear TBL REC COL           clear values from COLumn in RECord in TBL
  create TBL COL[:KEY]=VALUE  create and initialize new record
  destroy TBL REC             delete RECord from TBL
  wait-until TBL REC [COL[:KEY]=VALUE]  wait until condition is true
Potentially unsafe database commands require --force option.

Options:
  --db=DATABASE               connect to DATABASE
                              (default: unix:/var/run/openvswitch/db.sock)
  -t, --timeout=SECS          wait at most SECS seconds
  --dry-run                   do not commit changes to database
  --oneline                   print exactly one line of output per command

Output formatting options:
  -f, --format=FORMAT         set output formatting to FORMAT
                              ("table", "html", "csv", or "json")
  -d, --data=FORMAT           set table cell output formatting to
                              FORMAT ("string", "bare", or "json")
  --no-headings               omit table heading row
  --pretty                    pretty-print JSON in output
  --bare                      equivalent to "--format=list --data=bare --no-headings"

Logging options:
  -vSPEC, --verbose=SPEC   set logging levels
  -v, --verbose            set maximum verbosity level
  --log-file[=FILE]        enable logging to specified FILE
                           (default: /var/log/openvswitch/vtep-ctl.log)
  --syslog-method=(libc|unix:file|udp:ip:port)
                           specify how to send messages to syslog daemon
  --syslog-target=HOST:PORT  also send syslog msgs to HOST:PORT via UDP
  --no-syslog                 equivalent to --verbose=vtep_ctl:syslog:warn

Active database connection methods:
  tcp:IP:PORT             PORT at remote IP
  ssl:IP:PORT             SSL PORT at remote IP
  unix:FILE               Unix domain socket named FILE
Passive database connection methods:
  ptcp:PORT[:IP]          listen to TCP PORT on IP
  pssl:PORT[:IP]          listen for SSL on PORT on IP
  punix:FILE              listen on Unix domain socket FILE
PKI configuration (required to use SSL):
  -p, --private-key=FILE  file with private key
  -c, --certificate=FILE  file with certificate for private key
  -C, --ca-cert=FILE      file with peer CA certificate
SSL options:
  --ssl-protocols=PROTOS  list of SSL protocols to enable
  --ssl-ciphers=CIPHERS   list of SSL ciphers to enable

Other options:
  -h, --help                  display this help message
  -V, --version               display version information
root@fw1:mgmt:~# vtysh

Hello, this is FRRouting (version 7.5+cl4.4.0u4).
Copyright 1996-2005 Kunihiro Ishiguro, et al.

fw1# sh
sharp  show
fw1# show r
route-map         router-id         running-config
route-map-unused  rpki
fw1# show running-config
Building configuration...

Current configuration:
!
frr version 7.5+cl4.4.0u4
frr defaults datacenter
hostname fw1
log syslog informational
zebra nexthop proto only
service integrated-vtysh-config
!
ip route 10.1.10.0/24 10.1.101.1
ip route 10.1.20.0/24 10.1.101.1
ip route 10.1.30.0/24 10.1.102.1
!
vrf mgmt
 ip route 0.0.0.0/0 192.168.200.1
 exit-vrf
!
line vty
!
end
fw1# iptables -L
% Unknown command: iptables -L
fw1# exit
root@fw1:mgmt:~# iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination
DROP       all  --  240.0.0.0/5          anywhere
DROP       all  --  127.0.0.0/8          anywhere
DROP       all  --  base-address.mcast.net/4  anywhere
DROP       all  --  255.255.255.255      anywhere
SETCLASS   udp  --  anywhere             anywhere             udp dpt:3785 SETCLASS  class:7
POLICE     udp  --  anywhere             anywhere             udp dpt:3785 POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   udp  --  anywhere             anywhere             udp dpt:3784 SETCLASS  class:7
POLICE     udp  --  anywhere             anywhere             udp dpt:3784 POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   udp  --  anywhere             anywhere             udp dpt:4784 SETCLASS  class:7
POLICE     udp  --  anywhere             anywhere             udp dpt:4784 POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   ospf --  anywhere             anywhere             SETCLASS  class:7
POLICE     ospf --  anywhere             anywhere             POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   pim  --  anywhere             anywhere             SETCLASS  class:6
POLICE     pim  --  anywhere             anywhere             POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   tcp  --  anywhere             anywhere             tcp dpt:639 SETCLASS  class:6
POLICE     tcp  --  anywhere             anywhere             tcp dpt:639 POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   tcp  --  anywhere             anywhere             tcp spt:639 SETCLASS  class:6
POLICE     tcp  --  anywhere             anywhere             tcp spt:639 POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   tcp  --  anywhere             anywhere             tcp dpt:bgp SETCLASS  class:7
POLICE     tcp  --  anywhere             anywhere             tcp dpt:bgp POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   tcp  --  anywhere             anywhere             tcp spt:bgp SETCLASS  class:7
POLICE     tcp  --  anywhere             anywhere             tcp spt:bgp POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   tcp  --  anywhere             anywhere             tcp dpt:5342 SETCLASS  class:7
POLICE     tcp  --  anywhere             anywhere             tcp dpt:5342 POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   tcp  --  anywhere             anywhere             tcp spt:5342 SETCLASS  class:7
POLICE     tcp  --  anywhere             anywhere             tcp spt:5342 POLICE  mode:pkt rate:2000 burst:2000
SETCLASS   icmp --  anywhere             anywhere             SETCLASS  class:2
POLICE     icmp --  anywhere             anywhere             POLICE  mode:pkt rate:100 burst:40
SETCLASS   udp  --  anywhere             anywhere             udp dpts:bootps:bootpc SETCLASS  class:2
POLICE     udp  --  anywhere             anywhere             udp dpt:bootps POLICE  mode:pkt rate:100 burst:100
POLICE     udp  --  anywhere             anywhere             udp dpt:bootpc POLICE  mode:pkt rate:100 burst:100
SETCLASS   tcp  --  anywhere             anywhere             tcp dpts:67:68 SETCLASS  class:2
POLICE     tcp  --  anywhere             anywhere             tcp dpt:67 POLICE  mode:pkt rate:100 burst:100
POLICE     tcp  --  anywhere             anywhere             tcp dpt:68 POLICE  mode:pkt rate:100 burst:100
SETCLASS   igmp --  anywhere             anywhere             SETCLASS  class:6
POLICE     igmp --  anywhere             anywhere             POLICE  mode:pkt rate:300 burst:100
SETCLASS   vrrp --  anywhere             anywhere             SETCLASS  class:7
POLICE     vrrp --  anywhere             anywhere             POLICE  mode:pkt rate:2000 burst:2000
POLICE     all  --  anywhere             anywhere             ADDRTYPE match dst-type LOCAL POLICE  mode:pkt rate:1000 burst:1000 class:2
POLICE     all  --  anywhere             anywhere             ADDRTYPE match dst-type IPROUTER POLICE  mode:pkt rate:400 burst:100 class:2
SETCLASS   all  --  anywhere             anywhere             SETCLASS  class:0

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination
DROP       all  --  240.0.0.0/5          anywhere
DROP       all  --  127.0.0.0/8          anywhere
DROP       all  --  base-address.mcast.net/4  anywhere
DROP       all  --  255.255.255.255      anywhere

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
root@fw1:mgmt:~#

Anonyme

  • Invité
Datacenter virtuel
« Réponse #7 le: 14 janvier 2022 à 07:00:40 »
Ce qu'il se passe du côté des routeurs de bordure
order01 login: cumulus
Password:
Last login: Wed Aug 25 09:52:53 PDT 2021 from 192.168.200.1 on pts/0
Linux border01 4.19.0-cl-1-amd64 #1 SMP Debian 4.19.176-1+cl4.4.0u1 (2021-06-25) x86_64
#########################################################
Successfully logged in to: border01
#########################################################
cumulus@border01:mgmt:~$ vtysh
% Can't open configuration file /etc/frr/vtysh.conf due to 'Permission denied'.
Exiting: failed to connect to any daemons.
Hint: if this seems wrong, try running me as a privileged user!
cumulus@border01:mgmt:~$ sudo passwd root
New password:
Retype new password:
passwd: password updated successfully
cumulus@border01:mgmt:~$ su root
Password:
root@border01:mgmt:/home/cumulus# vtysh

Hello, this is FRRouting (version 7.5+cl4.4.0u4).
Copyright 1996-2005 Kunihiro Ishiguro, et al.

border01# show running-config
Building configuration...

Current configuration:
!
frr version 7.5+cl4.4.0u4
frr defaults datacenter
hostname border01
log syslog informational
zebra nexthop proto only
ip msdp mesh-group rpmesh source 10.10.10.63
ip msdp mesh-group rpmesh member 10.10.10.64
ip pim rp 10.10.100.100 239.1.1.0/24
ip pim keep-alive-timer 3600
ip pim ecmp
service integrated-vtysh-config
!
vrf BLUE
 ip route 10.1.10.0/24 10.1.102.4
 ip route 10.1.20.0/24 10.1.102.4
 vni 4002
 exit-vrf
!
vrf RED
 ip route 10.1.30.0/24 10.1.101.4
 vni 4001
 exit-vrf
!
vrf mgmt
 ip route 0.0.0.0/0 192.168.200.1
 exit-vrf
!
interface bond1
 evpn mh es-df-pref 50000
 evpn mh es-id 1
 evpn mh es-sys-mac 44:38:39:be:ef:ff
!
interface swp51
 evpn mh uplink
 ip pim
!
interface swp52
 evpn mh uplink
 ip pim
!
interface swp53
 evpn mh uplink
 ip pim
!
interface swp54
 evpn mh uplink
 ip pim
!
interface lo
 ip igmp
 ip pim
 ip pim use-source 10.10.10.63
!
router bgp 65163
 bgp router-id 10.10.10.63
 neighbor underlay peer-group
 neighbor underlay remote-as external
 neighbor swp51 interface peer-group underlay
 neighbor swp52 interface peer-group underlay
 neighbor swp53 interface peer-group underlay
 neighbor swp54 interface peer-group underlay
 !
 address-family ipv4 unicast
  redistribute connected
 exit-address-family
 !
 address-family l2vpn evpn
  neighbor underlay activate
  advertise-all-vni
 exit-address-family
!
router bgp 65163 vrf RED
 bgp router-id 10.10.10.63
 !
 address-family ipv4 unicast
  redistribute static
 exit-address-family
 !
 address-family l2vpn evpn
  advertise ipv4 unicast
 exit-address-family
!
router bgp 65163 vrf BLUE
 bgp router-id 10.10.10.63
 !
 address-family ipv4 unicast
  redistribute static
 exit-address-family
 !
 address-family l2vpn evpn
  advertise ipv4 unicast
 exit-address-family
!
line vty
!
end
border01#

Leon

  • Client SFR sur réseau Numericable
  • Modérateur
  • *
  • Messages: 5 971
Datacenter virtuel
« Réponse #8 le: 14 janvier 2022 à 17:39:33 »
Si j'ai bien compris, c'est une démo pour leur solution "NVIDIA CUMULUS Linux".
(Je ne savais même pas que NVIDIA faisait du software).

Je n'ai pas tout compris ce que c'était, ce "NVIDIA CUMULUS". Tu peux nous expliquer? Ca sert à quoi? C'est un "OS réseau", mais je ne sais pas ce que c'est un "OS réseau".
Leon. 

Anonyme

  • Invité
Datacenter virtuel
« Réponse #9 le: 14 janvier 2022 à 21:20:06 »
C'est une sorte de GNS3 sur le cloud, une démo de cumulus Linux.
Manifestement c'est un axe de développement pour Nvidia, ayant racheté Mellanox ( et leur Hardware bien connu pour les devices réseaux).
Nvidia connu pour ses chips GPU , se lance dans les devices réseaux ,effectivement c'est un démonstration pour le produit Cumulus Linux.
Basé sur Debian, cela intègre des briques Ansible, FRR etc.
Mais c'est comme le montre l'image de l'architecture, une architecture Datacenter simulée, à base de Leaf, Spine, de VxLAN, EVPN, VTEP.
A ma connaissance, il n'y a pas beaucoup de produits gratuits permettant d'implémenter ce type de solutions sur le marché.
Tu peux aller chez Cisco, Juniper, Arista etc. tu y laissera un bras.

Tous les devices, peuvent être implémentés en Hardware, les configurations seront identiques.

Une réflexion que je me suis faite, et que l'approfondirais à l'occasion, c'est cette structure  Leaf, Spine, en commutation et Routing.
Cela ne vous fait pas penser à une Matrice  2x2 du plan ?
Je m'explique, si on un prends un cristal adjacent, avec chaque atome dans une structure cristalline adjacente, et que l'on dit que chaque noeuds est une composante de ce cristal, il y a un moyen de construire une structure hautement scalable. Tous ces éléments n'ont pas besoin d'être physiquement géographiquement proches, mais cela permettrait de construire un maillage en plusieurs dimensions. Imaginez une structure en 3 dimensions, puis N dimensions. Si personne ne comprends ce que je raconte, mais la structure que j'évoque est hautement robuste, résiliante et scalable pour un "core Network".

Leon

  • Client SFR sur réseau Numericable
  • Modérateur
  • *
  • Messages: 5 971
Datacenter virtuel
« Réponse #10 le: 15 janvier 2022 à 07:06:53 »
C'est Wikipedia qui décrit le mieux Cumulus-Linux pour les ignares (dont je fais partie). Parce que les pubs de NVIDIA remplies de buzz-words, ça n'explique rien.

https://en.wikipedia.org/wiki/Cumulus_Networks#Cumulus_Linux
Cumulus Linux
Cumulus Linux was their open Linux based networking operating system for bare metal switches. It's been based on the Debian Linux distribution.[13]
In a 2017 Gartner report Cumulus Networks was highlighted as a pioneer of open source networking for developing an open source networking operating system in a market where hardware vendors usually delivered proprietary operating systems pre-installed. According to Gartner, Cumulus Networks had worked around the lack of vendor support for open source networking by deploying bare metal switches with the Cumulus Linux operating system in large corporate networks. 32 percent of the Fortune 50 companies used the Cumulus Linux operating system in their data centers in 2017.[14]


OK, donc c'est un OS open source pour switches et routeurs, créé par une société "Cumulus Networks" qui a été récemment rachetée par NVIDIA, et c'est complémentaire des produits Mellanox que NVIDIA a également acheté.

Leon.

Anonyme

  • Invité
Datacenter virtuel
« Réponse #11 le: 15 janvier 2022 à 09:29:33 »
Tu es moins ignare que tu veux bien le laisser croire.
Et au delà de tes considérations, c'est l'aspect architectural et structurel, l'aspect le plus intéressant, du moins c'est le propos de ce post.
[edit]
D'ailleurs je viens de remarquer que j'en suis à 633 posts, il m'en reste 33, et à 666 j'arrêterai.  ;D
[/edit]
« Modifié: 15 janvier 2022 à 10:06:26 par PhilippeMarques »