Auteur Sujet: FTTH 10G Free: Mesure de débit automatisé avec iPerf3 en IPv4 vs IPv6 (Lu 75536 fois)

kgersen · « **Réponse #36 le:** 09 janvier 2020 à 16:47:02 »

Citation de: Breizh29 le 09 janvier 2020 à 10:34:50

Non seulement les débits ont beaucoup baissé, mais en plus ils semblent très instables.

t'as essayé en réduisant le -P 16 ?

quoique c'est trop tard Vivien a enlever BBR.

Breizh29 · « **Réponse #37 le:** 09 janvier 2020 à 17:50:53 »

Citation de: kgersen le 09 janvier 2020 à 16:47:02

t'as essayé en réduisant le -P 16 ?

J'aurais pu, mais en dehors du script, car je voulais éviter de changer plusieurs facteurs à la fois.
Effectivement, c'est à présent trop tard. Qu'est-ce qui te fait penser que ça aurait pu donner de meilleurs résultats ?

Breizh29 · « **Réponse #38 le:** 09 janvier 2020 à 18:37:59 »

J'ai mis à jour le 1er post.
A première vue, on améliore nettement les choses, mais on ne revient pas au niveau d'Illinois sur les mêmes tranches horaires. A confirmer.

kgersen · « **Réponse #39 le:** 09 janvier 2020 à 18:39:25 »

Citation de: Breizh29 le 09 janvier 2020 à 17:50:53

J'aurais pu, mais en dehors du script, car je voulais éviter de changer plusieurs facteurs à la fois.
Effectivement, c'est à présent trop tard. Qu'est-ce qui te fait penser que ça aurait pu donner de meilleurs résultats ?

Ben y'a clairement un souci de ton coté si t'es obligé de monter a -P 16 quand meme. Soit un probleme de buffers ou un truc du genre.

avec -P 1 (sans -P quoi) tu obtient quoi ? si t'a pas au moins 1Gbps c'est deja ca qu'il faut résoudre je pense.

Breizh29 · « **Réponse #40 le:** 09 janvier 2020 à 18:55:26 »

En IPv4 :

iperf3 -c paris.testdebit.info -R -t 20 -O 5 -p 5202 -4
Connecting to host paris.testdebit.info, port 5202
Reverse mode, remote host paris.testdebit.info is sending
[ 6] local 192.168.200.115 port 49507 connected to 89.84.1.186 port 5202
[ ID] Interval Transfer Bitrate
[ 6] 0.00-1.00 sec 120 MBytes 1.01 Gbits/sec (omitted)
[ 6] 1.00-2.00 sec 160 MBytes 1.34 Gbits/sec (omitted)
[ 6] 2.00-3.00 sec 159 MBytes 1.33 Gbits/sec (omitted)
[ 6] 3.00-4.00 sec 159 MBytes 1.33 Gbits/sec (omitted)
[ 6] 4.00-5.00 sec 151 MBytes 1.26 Gbits/sec (omitted)
[ 6] 0.00-1.00 sec 118 MBytes 991 Mbits/sec
[ 6] 1.00-2.00 sec 130 MBytes 1.09 Gbits/sec
[ 6] 2.00-3.00 sec 137 MBytes 1.15 Gbits/sec
[ 6] 3.00-4.00 sec 131 MBytes 1.10 Gbits/sec
[ 6] 4.00-5.00 sec 108 MBytes 903 Mbits/sec
[ 6] 5.00-6.00 sec 113 MBytes 947 Mbits/sec
[ 6] 6.00-7.00 sec 119 MBytes 999 Mbits/sec
[ 6] 7.00-8.00 sec 106 MBytes 887 Mbits/sec
[ 6] 8.00-9.00 sec 89.4 MBytes 750 Mbits/sec
[ 6] 9.00-10.00 sec 76.7 MBytes 644 Mbits/sec
[ 6] 10.00-11.00 sec 69.5 MBytes 583 Mbits/sec
[ 6] 11.00-12.00 sec 53.1 MBytes 446 Mbits/sec
[ 6] 12.00-13.00 sec 56.7 MBytes 476 Mbits/sec
[ 6] 13.00-14.00 sec 60.8 MBytes 510 Mbits/sec
[ 6] 14.00-15.00 sec 66.5 MBytes 558 Mbits/sec
[ 6] 15.00-16.00 sec 69.6 MBytes 583 Mbits/sec
[ 6] 16.00-17.00 sec 75.7 MBytes 636 Mbits/sec
[ 6] 17.00-18.00 sec 79.5 MBytes 667 Mbits/sec
[ 6] 18.00-19.00 sec 74.5 MBytes 625 Mbits/sec
[ 6] 19.00-20.00 sec 66.5 MBytes 558 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 6] 0.00-20.00 sec 1.76 GBytes 756 Mbits/sec 7 sender
[ 6] 0.00-20.00 sec 1.76 GBytes 755 Mbits/sec receiver

iperf Done.

En IPv6 :

iperf3 -c paris.testdebit.info -R -t 20 -O 5 -p 5202 -6
Connecting to host paris.testdebit.info, port 5202
Reverse mode, remote host paris.testdebit.info is sending
[ 6] local 2a01:e0a:1fc:xxxxx port 49585 connected to 2001:860:de01:1100::2 port 5202
[ ID] Interval Transfer Bitrate
[ 6] 0.00-1.00 sec 104 MBytes 869 Mbits/sec (omitted)
[ 6] 1.00-2.00 sec 124 MBytes 1.04 Gbits/sec (omitted)
[ 6] 2.00-3.00 sec 126 MBytes 1.05 Gbits/sec (omitted)
[ 6] 3.00-4.00 sec 137 MBytes 1.15 Gbits/sec (omitted)
[ 6] 4.00-5.00 sec 145 MBytes 1.22 Gbits/sec (omitted)
[ 6] 0.00-1.00 sec 125 MBytes 1.05 Gbits/sec
[ 6] 1.00-2.00 sec 110 MBytes 923 Mbits/sec
[ 6] 2.00-3.00 sec 81.8 MBytes 686 Mbits/sec
[ 6] 3.00-4.00 sec 84.8 MBytes 711 Mbits/sec
[ 6] 4.00-5.00 sec 65.2 MBytes 547 Mbits/sec
[ 6] 5.00-6.00 sec 69.1 MBytes 579 Mbits/sec
[ 6] 6.00-7.00 sec 74.0 MBytes 621 Mbits/sec
[ 6] 7.00-8.00 sec 78.7 MBytes 660 Mbits/sec
[ 6] 8.00-9.00 sec 81.8 MBytes 686 Mbits/sec
[ 6] 9.00-10.00 sec 87.1 MBytes 731 Mbits/sec
[ 6] 10.00-11.00 sec 66.4 MBytes 557 Mbits/sec
[ 6] 11.00-12.00 sec 73.5 MBytes 617 Mbits/sec
[ 6] 12.00-13.00 sec 79.5 MBytes 667 Mbits/sec
[ 6] 13.00-14.00 sec 83.7 MBytes 702 Mbits/sec
[ 6] 14.00-15.00 sec 68.5 MBytes 574 Mbits/sec
[ 6] 15.00-16.00 sec 64.2 MBytes 539 Mbits/sec
[ 6] 16.00-17.00 sec 69.3 MBytes 581 Mbits/sec
[ 6] 17.00-18.00 sec 73.2 MBytes 614 Mbits/sec
[ 6] 18.00-19.00 sec 78.6 MBytes 658 Mbits/sec
[ 6] 19.00-20.00 sec 81.7 MBytes 686 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 6] 0.00-20.00 sec 1.56 GBytes 670 Mbits/sec 5 sender
[ 6] 0.00-20.00 sec 1.56 GBytes 669 Mbits/sec receiver

iperf Done.

Je croyais que c'était slow Start ?
Moi j'ai quick start and slow after...

kgersen · « **Réponse #41 le:** 09 janvier 2020 à 19:09:01 »

quelle version d'iperf3? (iperf3 -v)

ajoute les options "--get-server-output -V ", enleve les "-O 5"

essai aussi avec ces serveur: pox.nspeed.app et ping.online.net

Breizh29 · « **Réponse #42 le:** 09 janvier 2020 à 19:21:41 »

iperf3 -v
iperf 3.7 (cJSON 1.5.2)
Darwin Mac-mini-BZH.local 19.2.0 Darwin Kernel Version 19.2.0: Sat Nov 9 03:47:04 PST 2019; root:xnu-6153.61.1~20/RELEASE_X86_64 x86_64
Optional features available: sendfile / zerocopy, authentication

iperf3 -c paris.testdebit.info --get-server-output -R -p 5202 -6 -t 20
Connecting to host paris.testdebit.info, port 5202
Reverse mode, remote host paris.testdebit.info is sending
[ 6] local 2a01:e0a:1fc:xxx port 50508 connected to 2001:860:de01:1100::2 port 5202
[ ID] Interval Transfer Bitrate
[ 6] 0.00-1.00 sec 108 MBytes 906 Mbits/sec
[ 6] 1.00-2.00 sec 157 MBytes 1.32 Gbits/sec
[ 6] 2.00-3.00 sec 159 MBytes 1.33 Gbits/sec
[ 6] 3.00-4.00 sec 155 MBytes 1.30 Gbits/sec
[ 6] 4.00-5.00 sec 117 MBytes 980 Mbits/sec
[ 6] 5.00-6.00 sec 130 MBytes 1.09 Gbits/sec
[ 6] 6.00-7.00 sec 103 MBytes 862 Mbits/sec
[ 6] 7.00-8.00 sec 96.5 MBytes 810 Mbits/sec
[ 6] 8.00-9.00 sec 76.4 MBytes 641 Mbits/sec
[ 6] 9.00-10.00 sec 66.8 MBytes 560 Mbits/sec
[ 6] 10.00-11.00 sec 60.7 MBytes 509 Mbits/sec
[ 6] 11.00-12.00 sec 63.8 MBytes 535 Mbits/sec
[ 6] 12.00-13.00 sec 69.2 MBytes 581 Mbits/sec
[ 6] 13.00-14.00 sec 74.4 MBytes 625 Mbits/sec
[ 6] 14.00-15.00 sec 78.5 MBytes 658 Mbits/sec
[ 6] 15.00-16.00 sec 83.6 MBytes 702 Mbits/sec
[ 6] 16.00-17.00 sec 87.2 MBytes 731 Mbits/sec
[ 6] 17.00-18.00 sec 92.7 MBytes 778 Mbits/sec
[ 6] 18.00-19.00 sec 96.3 MBytes 807 Mbits/sec
[ 6] 19.00-20.00 sec 101 MBytes 844 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 6] 0.00-20.00 sec 1.94 GBytes 832 Mbits/sec 8 sender
[ 6] 0.00-20.00 sec 1.93 GBytes 828 Mbits/sec receiver

Server output:
-----------------------------------------------------------
Server listening on 5202
-----------------------------------------------------------
Accepted connection from 2a01:e0a:1fc:xxx, port 50507
[ 5] local 2001:860:de01:1100::2 port 5202 connected to 2a01:e0a:1fc:xxx port 50508
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 5] 0.00-1.00 sec 114 MBytes 960 Mbits/sec 0 2.01 MBytes
[ 5] 1.00-2.00 sec 158 MBytes 1.32 Gbits/sec 0 2.01 MBytes
[ 5] 2.00-3.00 sec 159 MBytes 1.33 Gbits/sec 0 2.01 MBytes
[ 5] 3.00-4.00 sec 155 MBytes 1.30 Gbits/sec 2 1.41 MBytes
[ 5] 4.00-5.00 sec 116 MBytes 975 Mbits/sec 0 1.57 MBytes
[ 5] 5.00-6.00 sec 130 MBytes 1.09 Gbits/sec 0 1.69 MBytes
[ 5] 6.00-7.00 sec 104 MBytes 870 Mbits/sec 2 1.27 MBytes
[ 5] 7.00-8.00 sec 96.2 MBytes 807 Mbits/sec 2 966 KBytes
[ 5] 8.00-9.00 sec 76.2 MBytes 640 Mbits/sec 0 1.01 MBytes
[ 5] 9.00-10.00 sec 67.5 MBytes 566 Mbits/sec 2 780 KBytes
[ 5] 10.00-11.00 sec 60.0 MBytes 503 Mbits/sec 0 830 KBytes
[ 5] 11.00-12.00 sec 63.8 MBytes 535 Mbits/sec 0 886 KBytes
[ 5] 12.00-13.00 sec 70.0 MBytes 587 Mbits/sec 0 944 KBytes
[ 5] 13.00-14.00 sec 73.8 MBytes 619 Mbits/sec 0 1001 KBytes
[ 5] 14.00-15.00 sec 78.8 MBytes 661 Mbits/sec 0 1.03 MBytes
[ 5] 15.00-16.00 sec 83.8 MBytes 703 Mbits/sec 0 1.09 MBytes
[ 5] 16.00-17.00 sec 87.5 MBytes 734 Mbits/sec 0 1.15 MBytes
[ 5] 17.00-18.00 sec 92.5 MBytes 776 Mbits/sec 0 1.21 MBytes
[ 5] 18.00-19.00 sec 96.2 MBytes 807 Mbits/sec 0 1.26 MBytes
[ 5] 19.00-20.00 sec 100 MBytes 839 Mbits/sec 0 1.32 MBytes
[ 5] 20.00-20.01 sec 1.25 MBytes 786 Mbits/sec 0 1.32 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 5] 0.00-20.01 sec 1.94 GBytes 831 Mbits/sec 8 sender
[ 5] 0.00-20.01 sec 0.00 Bytes 0.00 bits/sec receiver

iperf Done.

Breizh29 · « **Réponse #43 le:** 09 janvier 2020 à 19:24:45 »

Sur Online, ça semble plus stable :

iperf3 -c ping.online.net --get-server-output -R -p 5205 -6 -t 20
Connecting to host ping.online.net, port 5205
Reverse mode, remote host ping.online.net is sending
[ 7] local 192.168.200.115 port 50677 connected to 62.210.18.40 port 5205
[ ID] Interval Transfer Bitrate
[ 7] 0.00-1.00 sec 143 MBytes 1.20 Gbits/sec
[ 7] 1.00-2.00 sec 160 MBytes 1.35 Gbits/sec
[ 7] 2.00-3.00 sec 160 MBytes 1.34 Gbits/sec
[ 7] 3.00-4.00 sec 162 MBytes 1.36 Gbits/sec
[ 7] 4.00-5.00 sec 160 MBytes 1.34 Gbits/sec
[ 7] 5.00-6.00 sec 162 MBytes 1.36 Gbits/sec
[ 7] 6.00-7.00 sec 161 MBytes 1.35 Gbits/sec
[ 7] 7.00-8.00 sec 158 MBytes 1.32 Gbits/sec
[ 7] 8.00-9.00 sec 160 MBytes 1.35 Gbits/sec
[ 7] 9.00-10.00 sec 160 MBytes 1.35 Gbits/sec
[ 7] 10.00-11.00 sec 160 MBytes 1.34 Gbits/sec
[ 7] 11.00-12.00 sec 160 MBytes 1.34 Gbits/sec
[ 7] 12.00-13.00 sec 162 MBytes 1.36 Gbits/sec
[ 7] 13.00-14.00 sec 160 MBytes 1.34 Gbits/sec
[ 7] 14.00-15.00 sec 161 MBytes 1.35 Gbits/sec
[ 7] 15.00-16.00 sec 160 MBytes 1.34 Gbits/sec
[ 7] 16.00-17.00 sec 160 MBytes 1.34 Gbits/sec
[ 7] 17.00-18.00 sec 160 MBytes 1.35 Gbits/sec
[ 7] 18.00-19.00 sec 160 MBytes 1.34 Gbits/sec
[ 7] 19.00-20.00 sec 162 MBytes 1.36 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 7] 0.00-20.00 sec 3.13 GBytes 1.35 Gbits/sec 0 sender
[ 7] 0.00-20.00 sec 3.12 GBytes 1.34 Gbits/sec receiver

Server output:
iperf 3.1.3
Linux ping 4.15.0-47-generic #50-Ubuntu SMP Wed Mar 13 10:44:52 UTC 2019 x86_64
-----------------------------------------------------------
Server listening on 5205
-----------------------------------------------------------
Time: Thu, 09 Jan 2020 18:22:29 GMT
Accepted connection from xxx, port 50676
Cookie: piwaxi5xlrwe5jxom6rr2s7hqnypg7bduwrc
TCP MSS: 1448 (default)
[ 5] local 62.210.18.40 port 5205 connected to xxx port 50677
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks, omitting 0 seconds, 20 second test
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 5] 0.00-2.00 sec 318 MBytes 1.33 Gbits/sec 0 4.00 MBytes
[ 5] 2.00-4.00 sec 322 MBytes 1.35 Gbits/sec 0 4.00 MBytes
[ 5] 4.00-6.00 sec 322 MBytes 1.35 Gbits/sec 0 4.00 MBytes
[ 5] 6.00-8.00 sec 318 MBytes 1.33 Gbits/sec 0 4.00 MBytes
[ 5] 8.00-10.00 sec 321 MBytes 1.35 Gbits/sec 0 4.00 MBytes
[ 5] 10.00-12.00 sec 320 MBytes 1.34 Gbits/sec 0 4.00 MBytes
[ 5] 12.00-14.00 sec 321 MBytes 1.35 Gbits/sec 0 4.00 MBytes
[ 5] 14.00-16.00 sec 322 MBytes 1.35 Gbits/sec 0 4.00 MBytes
[ 5] 16.00-18.00 sec 320 MBytes 1.34 Gbits/sec 0 4.00 MBytes
[ 5] 18.00-20.00 sec 322 MBytes 1.35 Gbits/sec 0 4.00 MBytes
[ 5] 20.00-20.01 sec 1.25 MBytes 799 Mbits/sec 0 4.00 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Retr
[ 5] 0.00-20.01 sec 3.13 GBytes 1.35 Gbits/sec 0 sender
[ 5] 0.00-20.01 sec 0.00 Bytes 0.00 bits/sec receiver
CPU Utilization: local/sender 2.6% (0.0%u/2.6%s), remote/receiver 9.3% (1.7%u/7.8%s)

iperf Done.

Breizh29 · « **Réponse #44 le:** 09 janvier 2020 à 19:29:15 »

Sur le dernier :

iperf3 -c pox.nspeed.app --get-server-output -R -p 5201 -6 -t 20
Connecting to host pox.nspeed.app, port 5201
Reverse mode, remote host pox.nspeed.app is sending
[ 6] local 2a01:e0a:1fc:xxx port 50860 connected to 2001:bc8:2679:100::1 port 5201
[ ID] Interval Transfer Bitrate
[ 6] 0.00-1.00 sec 97.3 MBytes 816 Mbits/sec
[ 6] 1.00-2.00 sec 109 MBytes 912 Mbits/sec
[ 6] 2.00-3.00 sec 111 MBytes 928 Mbits/sec
[ 6] 3.00-4.00 sec 109 MBytes 915 Mbits/sec
[ 6] 4.00-5.00 sec 111 MBytes 928 Mbits/sec
[ 6] 5.00-6.00 sec 111 MBytes 928 Mbits/sec
[ 6] 6.00-7.00 sec 111 MBytes 929 Mbits/sec
[ 6] 7.00-8.00 sec 111 MBytes 928 Mbits/sec
[ 6] 8.00-9.00 sec 111 MBytes 928 Mbits/sec
[ 6] 9.00-10.00 sec 100 MBytes 840 Mbits/sec
[ 6] 10.00-11.00 sec 90.7 MBytes 761 Mbits/sec
[ 6] 11.00-12.00 sec 69.0 MBytes 578 Mbits/sec
[ 6] 12.00-13.00 sec 58.2 MBytes 488 Mbits/sec
[ 6] 13.00-14.00 sec 48.4 MBytes 405 Mbits/sec
[ 6] 14.00-15.00 sec 47.0 MBytes 394 Mbits/sec
[ 6] 15.00-16.00 sec 50.3 MBytes 422 Mbits/sec
[ 6] 16.00-17.00 sec 54.2 MBytes 455 Mbits/sec
[ 6] 17.00-18.00 sec 58.3 MBytes 489 Mbits/sec
[ 6] 18.00-19.00 sec 61.9 MBytes 520 Mbits/sec
[ 6] 19.00-20.00 sec 66.2 MBytes 555 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 6] 0.00-20.01 sec 1.65 GBytes 707 Mbits/sec 32 sender
[ 6] 0.00-20.00 sec 1.64 GBytes 706 Mbits/sec receiver

Server output:
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 2a01:e0a:1fc:xxx, port 50859
[ 5] local 2001:bc8:2679:100::1 port 5201 connected to 2a01:e0a:1fc:xxx port 50860
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 98.5 MBytes 826 Mbits/sec 0 3.31 MBytes
[ 5] 1.00-2.00 sec 109 MBytes 912 Mbits/sec 1 2.32 MBytes
[ 5] 2.00-3.00 sec 111 MBytes 933 Mbits/sec 0 2.32 MBytes
[ 5] 3.00-4.00 sec 109 MBytes 912 Mbits/sec 27 1.67 MBytes
[ 5] 4.00-5.00 sec 111 MBytes 933 Mbits/sec 0 1.73 MBytes
[ 5] 5.00-6.00 sec 110 MBytes 923 Mbits/sec 0 1.73 MBytes
[ 5] 6.00-7.00 sec 111 MBytes 933 Mbits/sec 0 1.84 MBytes
[ 5] 7.00-8.00 sec 110 MBytes 923 Mbits/sec 0 1.84 MBytes
[ 5] 8.00-9.00 sec 111 MBytes 933 Mbits/sec 0 1.84 MBytes
[ 5] 9.00-10.00 sec 100 MBytes 839 Mbits/sec 1 1.36 MBytes
[ 5] 10.00-11.00 sec 91.2 MBytes 765 Mbits/sec 1 1.01 MBytes
[ 5] 11.00-12.00 sec 68.8 MBytes 577 Mbits/sec 1 782 KBytes
[ 5] 12.00-13.00 sec 58.8 MBytes 493 Mbits/sec 0 840 KBytes
[ 5] 13.00-14.00 sec 48.8 MBytes 409 Mbits/sec 1 635 KBytes
[ 5] 14.00-15.00 sec 46.2 MBytes 388 Mbits/sec 0 682 KBytes
[ 5] 15.00-16.00 sec 50.0 MBytes 419 Mbits/sec 0 732 KBytes
[ 5] 16.00-17.00 sec 55.0 MBytes 461 Mbits/sec 0 787 KBytes
[ 5] 17.00-18.00 sec 57.5 MBytes 482 Mbits/sec 0 841 KBytes
[ 5] 18.00-19.00 sec 62.5 MBytes 524 Mbits/sec 0 895 KBytes
[ 5] 19.00-20.00 sec 66.2 MBytes 556 Mbits/sec 0 950 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.01 sec 1.65 GBytes 707 Mbits/sec 32 sender

iperf Done.

kgersen · « **Réponse #45 le:** 09 janvier 2020 à 19:48:26 »

yeah pas top.

essai de recevoir un flux UDP a 1Gbps par exemple:

Code: [Sélectionner]

iperf3 -4 -u -c ping.online.net --get-server-output -V -R -p 520x -b 1G(ajuster 520x a un dispo, puis en IPv6)

puis monte a 5G pour voir (-b 5G). Mais pas plus de 10s , sert a rien flooder le Net avec de l'UDP.

a priori paris.testdebit.info ne fonctionne pas en UDP.

Apres avec Free ce n'est pas la meilleur heure pour tester

vivien · « **Réponse #46 le:** 09 janvier 2020 à 21:06:20 »

Citation de: Breizh29 le 09 janvier 2020 à 17:50:53

J'aurais pu, mais en dehors du script, car je voulais éviter de changer plusieurs facteurs à la fois.
Effectivement, c'est à présent trop tard. Qu'est-ce qui te fait penser que ça aurait pu donner de meilleurs résultats ?

Non ce n'est pas trop tard.

J'ai changé rapidement car tu disais arrêter rapidement les tests.

Je suis prêt à repasser sur BBR si tu t'en sert pour faire des tests.

Le mieux c'est peut-être que ce soit toi qui me dise quand changer.

Breizh29 · « **Réponse #47 le:** 09 janvier 2020 à 21:23:45 »

A la base, avec ce thread je souhaitais voir comment optimiser au mieux la connexion 10G (mtu, stack TCP, ...) pour voir si les 7 gb/s sont dépassables en heure creuse et si les debits IPv4 et IPv6 peuvent être proches tout au long de la journée.
Si cela permet au passage d’optimiser le serveur de test, c’est tant mieux.

Si tu repasses en BBR, et à supposer qu’un test montre que ça se passe mieux avec moins de threads, quelle en sera la conclusion ?

Je suis un peu perdu sur les pistes à explorer...

Ps: je fais les test udp asap